OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity

stm32h7/rcc: make VOS0 configurable from board.h also for stm32h7x7xx 

Over-drive can be forced to a given state by adding define to the
board.h configuration file:

   #define STM32_VOS_OVERDRIVE 1 - force over-drive enabled,
   #define STM32_VOS_OVERDRIVE 0 - force over-drive disabled,
   #undef STM32_VOS_OVERDRIVE    - autoselect over-drive by the default RCC logic
This commit is contained in:
raiden00pl 2023-04-14 09:33:04 +02:00 committed by David Sidrane
parent 876b7a5e8e
commit 642358e68f
1 changed files with 44 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

65
arch/arm/src/stm32h7/stm32h7x7xx_rcc.c
View File

@ -98,6 +98,34 @@
# define USE_PLL3
#endif
/* Over-drive is supported only for Voltage output scale 1 mode.
* It is required when SYSCLK frequency is over 400 MHz or it can be forced
* to a given state by adding define to the board.h configuration file:
*
* #define STM32_VOS_OVERDRIVE 1 - force over-drive enabled,
* #define STM32_VOS_OVERDRIVE 0 - force over-drive disabled,
* #undef STM32_VOS_OVERDRIVE - autoselect over-drive by logic below
*
* Boosting the core voltage can be a workaround solution to problems with
* poor board signal integration for high-speed digital interfaces like ULPI.
* Higher voltage means faster clock signal edges which may be sufficient to
* synchronise the high-speed clock and data.
*/
#ifndef STM32_VOS_OVERDRIVE
# if (STM32_PWR_VOS_SCALE == PWR_D3CR_VOS_SCALE_1) && \
(STM32_SYSCLK_FREQUENCY > 400000000)
# define STM32_VOS_OVERDRIVE 1
# else
# define STM32_VOS_OVERDRIVE 0
# endif
#else
# if (STM32_VOS_OVERDRIVE == 1) && \
(STM32_PWR_VOS_SCALE != PWR_D3CR_VOS_SCALE_1)
# error Over-drive can be selected only when VOS1 is configured
# endif
#endif
/****************************************************************************
* Private Data
****************************************************************************/
@ -855,30 +883,25 @@ void stm32_stdclockconfig(void)
{
}
/* Over-drive is needed if
* - Voltage output scale 1 mode is selected and SYSCLK frequency is
* over 400 MHz.
*/
#if STM32_VOS_OVERDRIVE && (STM32_PWR_VOS_SCALE == PWR_D3CR_VOS_SCALE_1)
/* Over-drive support for VOS1 */
if ((STM32_PWR_VOS_SCALE == PWR_D3CR_VOS_SCALE_1) &&
STM32_SYSCLK_FREQUENCY > 400000000)
/* Enable System configuration controller clock to Enable ODEN */
regval = getreg32(STM32_RCC_APB4ENR);
regval |= RCC_APB4ENR_SYSCFGEN;
putreg32(regval, STM32_RCC_APB4ENR);
/* Enable Overdrive */
regval = getreg32(STM32_SYSCFG_PWRCR);
regval |= SYSCFG_PWRCR_ODEN;
putreg32(regval, STM32_SYSCFG_PWRCR);
while ((getreg32(STM32_PWR_D3CR) & STM32_PWR_D3CR_VOSRDY) == 0)
{
/* Enable System configuration controller clock to Enable ODEN */
regval = getreg32(STM32_RCC_APB4ENR);
regval |= RCC_APB4ENR_SYSCFGEN;
putreg32(regval, STM32_RCC_APB4ENR);
/* Enable Overdrive to extend the clock frequency up to 480 MHz. */
regval = getreg32(STM32_SYSCFG_PWRCR);
regval |= SYSCFG_PWRCR_ODEN;
putreg32(regval, STM32_SYSCFG_PWRCR);
while ((getreg32(STM32_PWR_D3CR) & STM32_PWR_D3CR_VOSRDY) == 0)
{
}
}
#endif
/* Configure FLASH wait states */