OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity

stm32l4/doc: fix b_l475e_iot01a documentation board 

Signed-off-by: Jorge Guzman <jorge.gzm@gmail.com>
This commit is contained in:
Jorge Guzman 2024-05-01 16:11:52 -03:00 committed by Xiang Xiao
parent b4d977715e
commit 4f2f5e1c5e
1 changed files with 12 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
Documentation/platforms/arm/stm32l4/boards/b-l475e-iot01a/index.rst
View File

@ -84,7 +84,7 @@ corresponding GPIO.::
These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is
selected. In that case, the usage by the board port is defined in
include/board.h and src/lpc31_leds.c. The LEDs are used to encode
OS-related events as follows:
OS-related events as follows::
SYMBOL Meaning LED2 LED1
------------------- ----------------------- -------- --------
@ -114,7 +114,7 @@ Serial Console
Arduino Serial Shield
---------------------
An TLL-to-RS232 Converter shield may be used with UART4:
An TLL-to-RS232 Converter shield may be used with UART4::
UART4:
@ -129,7 +129,7 @@ Virtual COM Port
----------------
The serial interface USART1 is directly available as a virtual COM port
of the PC connected to the ST-LINK/V2-1 USB connector CN7.
of the PC connected to the ST-LINK/V2-1 USB connector CN7. ::
USART1:
@ -146,7 +146,7 @@ no parity, 1 stop bit, no flow control.
Other Options
-------------
USART2 - Available on CN10 if solder bridges closed.
USART2 - Available on CN10 if solder bridges closed::
-------------- ---------------- ---------------------------
STM32L475VGTx Board Signal PMOD / Solder Bridges
@ -155,7 +155,7 @@ USART2 - Available on CN10 if solder bridges closed.
USART2_TX PD5 PMOD-UART2_TX CN10 pin2 TX/D1 (SB20)
-------------- ---------------- ---------------------------
USART3 - Dedicated to ISM43362-M3G-L44 Serial-to-Wifi Module.
USART3 - Dedicated to ISM43362-M3G-L44 Serial-to-Wifi Module::
-------------- ---------------- ------------------
STM32L475VGTx Board Signal Arduino Connector
@ -389,7 +389,7 @@ NOTES:
Test Matrix:
The following configurations have been tested successfully (with
CRC disabled):
CRC disabled)::
=========== ===== ===== ======
COMPRESSION UDP TCP Telnet
@ -470,7 +470,7 @@ configuration and most of the notes there apply here as well.
Where <server-ip> is the IP address of the E1 endpoint.
Similarly for the UDP test:
Similarly for the UDP test::
E1: nsh> udpserver &
E2: nsh> udpclient <server-ip> &
@ -498,7 +498,7 @@ configuration and most of the notes there apply here as well.
will map the all-nodes IPv6 to the Spirit destination address 0xff and
the packet will be broadcast to all Spirit nodes.
Here are the procedures for using the test
Here are the procedures for using the test::
C: nsh> ifup wpan0 <-- Brings up the network on the hub