Updated README
This commit is contained in:
parent
ff312168e8
commit
3f81f62b4b
|
@ -2170,6 +2170,25 @@ Configurations
|
|||
Library Routines
|
||||
CONFIG_SCHED_WORKQUEUE=y : Alarm needs work queue support
|
||||
|
||||
18. This example can be configured to exercise the watchdog timer test
|
||||
(apps/examples/watchdog). This can be selected with the following
|
||||
settings in the NuttX configuration file:
|
||||
|
||||
System Type:
|
||||
CONFIG_SAMA5_WDT=y : Enable the WDT peripheral
|
||||
: Defaults in "RTC Configuration" should be OK
|
||||
|
||||
Drivers (this will automatically be selected):
|
||||
CONFIG_WATCHDOG=y : Enables watchdog timer driver support
|
||||
|
||||
Application Configuration -> Eamples
|
||||
CONFIG_EXAMPLES_WATCHDOG=y : Enable the apps/examples/watchdog
|
||||
|
||||
The WDT timer is driven off the slow, 32768Hz clock divided by 128.
|
||||
As a result, the watchdog a maximum timeout value of 16 seconds. The
|
||||
SAMA5 WDT may also only be programmed one time; the processor must be
|
||||
reset before the WDT can be reprogrammed.
|
||||
|
||||
STATUS:
|
||||
|
||||
PCK FREQUENCY
|
||||
|
|
Loading…
Reference in New Issue