OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity

SAMV7: Correct low-level console output

This commit is contained in:
Gregory Nutt 2015-03-11 14:39:32 -06:00
parent 298cf7e8e3
commit 3d60cc7768
2 changed files with 15 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
arch/arm/src/samv7/sam_lowputc.c
View File

@ -47,6 +47,7 @@
#include "up_internal.h"
#include "up_arch.h"
#include "sam_config.h"
#include "sam_gpio.h"
#include "sam_periphclks.h"
#include "sam_lowputc.h"
@ -390,9 +391,10 @@ void sam_lowsetup(void)
* for lower USART clocks.
*/
divb3 = ((FAST_USART_CLOCK + (priv->baud << 3)) << 3) / (priv->baud << 4);
divb3 = ((FAST_USART_CLOCK + (SAM_CONSOLE_BAUD << 3)) << 3) /
(SAM_CONSOLE_BAUD << 4);
intpart = (divb3 >> 3);
fracpart = (divb3 & 7)
fracpart = (divb3 & 7);
/* Retain the fast MR peripheral clock UNLESS unless using that clock
* would result in an excessively large divider.
@ -400,20 +402,21 @@ void sam_lowsetup(void)
* REVISIT: The fractional divider is not used.
*/
if ((regval & UART_BRGR_CD_MASK) != 0)
if ((intpart & ~UART_BRGR_CD_MASK) != 0)
{
/* Use the divided USART clock */
divb3 = ((FAST_USART_CLOCK + (priv->baud << 3)) << 3) / (priv->baud << 4);
divb3 = ((SLOW_USART_CLOCK + (SAM_CONSOLE_BAUD << 3)) << 3) /
(SAM_CONSOLE_BAUD << 4);
intpart = (divb3 >> 3);
fracpart = (divb3 & 7)
fracpart = (divb3 & 7);
/* Re-select the clock source */
regval = sam_serialin(priv, SAM_UART_MR_OFFSET);
regval = getreg32(SAM_CONSOLE_BASE + SAM_UART_MR_OFFSET);
regval &= ~UART_MR_USCLKS_MASK;
regval |= UART_MR_USCLKS_MCKDIV;
sam_serialout(priv, SAM_UART_MR_OFFSET, regval);
putreg32(regval, SAM_CONSOLE_BASE + SAM_UART_MR_OFFSET);
}
/* Save the BAUD divider (the fractional part is not used for UARTs) */

12
arch/arm/src/samv7/sam_serial.c
View File

@ -68,10 +68,6 @@
* Pre-processor Definitions
****************************************************************************/
/* If we are not using the serial driver for the console, then we still must
* provide some minimal implementation of up_putc.
*/
#ifdef USE_SERIALDRIVER
/* Which UART/USART with be tty0/console and which tty1-7? */
@ -870,7 +866,8 @@ static int sam_setup(struct uart_dev_s *dev)
* for lower USART clocks.
*/
divb3 = ((FAST_USART_CLOCK + (priv->baud << 3)) << 3) / (priv->baud << 4);
divb3 = ((FAST_USART_CLOCK + (priv->baud << 3)) << 3) /
(priv->baud << 4);
intpart = divb3 >> 3;
fracpart = divb3 & 7;
@ -880,11 +877,12 @@ static int sam_setup(struct uart_dev_s *dev)
* REVISIT: The fractional divider is not used.
*/
if ((regval & UART_BRGR_CD_MASK) != 0)
if ((intpart & ~UART_BRGR_CD_MASK) != 0)
{
/* Use the divided USART clock */
divb3 = ((FAST_USART_CLOCK + (priv->baud << 3)) << 3) / (priv->baud << 4);
divb3 = ((SLOW_USART_CLOCK + (priv->baud << 3)) << 3) /
(priv->baud << 4);
intpart = divb3 >> 3;
fracpart = divb3 & 7;