drivers/syslog/syslog_device.c: Fix assert that assumes re-opened syslog file is the same. Logic in syslog_file_channel() is calling syslog_initialize() for the default syslog device as a recovery action after failed syslog_dev_initialize().
This commit is contained in:
Juha Niskanen
Gregory Nutt
parent
853e3e0086
commit
219d99451a
|
|
@ -162,7 +162,7 @@ config RAMLOG_SYSLOG
|
|||
Use the RAM logging device for the syslogging interface. If this
|
||||
feature is enabled (along with SYSLOG), then all debug output (only)
|
||||
will be re-directed to the circular buffer in RAM. This RAM log can
|
||||
be viewed from NSH using the 'dmesg'command.
|
||||
be viewed from NSH using the 'dmesg' command.
|
||||
|
||||
config SYSLOG_CONSOLE
|
||||
bool "Log to /dev/console"
|
||||
|
|
|
|||
|
|
@ -116,7 +116,7 @@ SYSLOG Channels
|
|||
SYSLOG Channel Interfaces
|
||||
-------------------------
|
||||
In the NuttX SYSLOG implementation, the underlying device logic the
|
||||
supports the SYSLOG output is referred to as a SYSLOG channel//. Each
|
||||
supports the SYSLOG output is referred to as a SYSLOG channel. Each
|
||||
SYSLOG channel is represented by an interface defined in
|
||||
include/nuttx/syslog/syslog.h:
|
||||
|
||||
|
|
@ -196,7 +196,7 @@ SYSLOG Channels
|
|||
|
||||
Description:
|
||||
|
||||
One power up, the SYSLOG facility is non-existent or limited to very
|
||||
On power up, the SYSLOG facility is non-existent or limited to very
|
||||
low-level output. This function is called later in the initialization
|
||||
sequence after full driver support has been initialized. It installs
|
||||
the configured SYSLOG drivers and enables full SYSLOGing capability.
|
||||
|
|
@ -354,7 +354,7 @@ SYSLOG Channel Options
|
|||
/dev/ttyS0.
|
||||
|
||||
This SYSLOG device channel is selected with CONFIG_SYSLOG_CHAR and has no
|
||||
other dependencies. Differences fromthe SYSLOG console channel include:
|
||||
other dependencies. Differences from the SYSLOG console channel include:
|
||||
|
||||
* CONFIG_SYSLOG_DEVPATH. This configuration option string must be set
|
||||
provide the full path to the character device to be used.
|
||||
|
|
@ -399,8 +399,8 @@ SYSLOG Channel Options
|
|||
|
||||
This tiny function is simply a wrapper around syslog_dev_initialize()
|
||||
and syslog_channel(). It calls syslog_dev_initialize() to configure
|
||||
the character file at 'devpath then calls syslog_channel() to use that
|
||||
device as the SYSLOG output channel.
|
||||
the character file at 'devpath' and then calls syslog_channel() to use
|
||||
that device as the SYSLOG output channel.
|
||||
|
||||
File SYSLOG channels differ from other SYSLOG channels in that they
|
||||
cannot be established until after fully booting and mounting the target
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
/****************************************************************************
|
||||
* drivers/syslog/syslog_device.c
|
||||
*
|
||||
* Copyright (C) 2012, 2016-2017 Gregory Nutt. All rights reserved.
|
||||
* Copyright (C) 2012, 2016-2017, 2019 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
|
|
@ -232,9 +232,9 @@ static int syslog_dev_outputready(void)
|
|||
|
||||
if (g_syslog_dev.sl_state == SYSLOG_UNINITIALIZED ||
|
||||
g_syslog_dev.sl_state == SYSLOG_INITIALIZING)
|
||||
{
|
||||
return -EAGAIN; /* Can't access the SYSLOG now... maybe next time? */
|
||||
}
|
||||
{
|
||||
return -EAGAIN; /* Can't access the SYSLOG now... maybe next time? */
|
||||
}
|
||||
|
||||
/* Case (6) */
|
||||
|
||||
|
|
@ -259,7 +259,7 @@ static int syslog_dev_outputready(void)
|
|||
{
|
||||
/* Try again to initialize the device. We may do this repeatedly
|
||||
* because the log device might be something that was not ready
|
||||
* the first time that syslog_dev_initializee() was called (such as a
|
||||
* the first time that syslog_dev_initialize() was called (such as a
|
||||
* USB serial device that has not yet been connected or a file in
|
||||
* an NFS mounted file system that has not yet been mounted).
|
||||
*/
|
||||
|
|
@ -332,25 +332,37 @@ int syslog_dev_initialize(FAR const char *devpath, int oflags, int mode)
|
|||
if (g_syslog_dev.sl_state == SYSLOG_REOPEN)
|
||||
{
|
||||
/* Re-opening: Then we should already have a copy of the path to the
|
||||
* device.
|
||||
* device. But that may be for a different device if we revert back
|
||||
* to old syslog destination after the previous attempt failed.
|
||||
*/
|
||||
|
||||
DEBUGASSERT(g_syslog_dev.sl_devpath != NULL &&
|
||||
strcmp(g_syslog_dev.sl_devpath, devpath) == 0);
|
||||
DEBUGASSERT(g_syslog_dev.sl_devpath != NULL);
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Initializing. Copy the device path so that we can use it if we
|
||||
* have to re-open the file.
|
||||
*/
|
||||
/* Initializing. We do not have the device path yet. */
|
||||
|
||||
DEBUGASSERT(g_syslog_dev.sl_devpath == NULL);
|
||||
g_syslog_dev.sl_oflags = oflags;
|
||||
g_syslog_dev.sl_mode = mode;
|
||||
g_syslog_dev.sl_devpath = strdup(devpath);
|
||||
DEBUGASSERT(g_syslog_dev.sl_devpath != NULL);
|
||||
}
|
||||
|
||||
/* Copy the device path so that we can use it if we
|
||||
* have to re-open the file.
|
||||
*/
|
||||
|
||||
g_syslog_dev.sl_oflags = oflags;
|
||||
g_syslog_dev.sl_mode = mode;
|
||||
if (g_syslog_dev.sl_devpath != devpath)
|
||||
{
|
||||
if (g_syslog_dev.sl_devpath != NULL)
|
||||
{
|
||||
kmm_free(g_syslog_dev.sl_devpath);
|
||||
}
|
||||
|
||||
g_syslog_dev.sl_devpath = strdup(devpath);
|
||||
}
|
||||
|
||||
DEBUGASSERT(g_syslog_dev.sl_devpath != NULL);
|
||||
|
||||
g_syslog_dev.sl_state = SYSLOG_INITIALIZING;
|
||||
|
||||
/* Open the device driver. */
|
||||
|
|
@ -508,8 +520,8 @@ ssize_t syslog_dev_write(FAR const char *buffer, size_t buflen)
|
|||
* - endptr points to the special character.
|
||||
*/
|
||||
|
||||
writelen = (size_t)((uintptr_t)endptr - (uintptr_t)buffer);
|
||||
if (writelen > 0)
|
||||
writelen = (size_t)((uintptr_t)endptr - (uintptr_t)buffer);
|
||||
if (writelen > 0)
|
||||
{
|
||||
nwritten = file_write(&g_syslog_dev.sl_file, buffer, writelen);
|
||||
if (nwritten < 0)
|
||||
|
|
|
|||
|
|
@ -50,14 +50,16 @@
|
|||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/* Configuration ************************************************************/
|
||||
|
||||
/* CONFIG_SYSLOG_INTBUFFER - Enables an interrupt buffer that will be used
|
||||
* to serialize debug output from interrupt handlers.
|
||||
* CONFIG_SYSLOG_INTBUFSIZE - The size of the interrupt buffer in bytes.
|
||||
* CONFIG_SYSLOG_DEVPATH - The full path to the system logging device
|
||||
*
|
||||
* In addition, some SYSLOG device must also be enabled that will provide
|
||||
* the syslog output "channel. As of this writing, there are two SYSLOG
|
||||
* the syslog output channel. As of this writing, there are two SYSLOG
|
||||
* devices available:
|
||||
*
|
||||
* 1. A RAM SYSLOGing device that will log data into a circular buffer
|
||||
|
|
@ -99,7 +101,7 @@
|
|||
|
||||
enum syslog_init_e
|
||||
{
|
||||
SYSLOG_INIT_RESET = 0, /* Power on SYSLOG initializaton phase */
|
||||
SYSLOG_INIT_RESET = 0, /* Power on SYSLOG initialization phase */
|
||||
SYSLOG_INIT_EARLY, /* Early initialization in up_initialize() */
|
||||
SYSLOG_INIT_LATE /* Late initialization in nx_start(). */
|
||||
};
|
||||
|
|
|
|||
Loading…
Reference in New Issue