From 12adde1e804cd88c4bc1a1663b3de6c84a97dd2d Mon Sep 17 00:00:00 2001 From: Gregory Nutt Date: Sat, 1 Mar 2014 09:41:42 -0600 Subject: [PATCH] configs/lpcxpresso-lpc1768/nsh converted to use the kconfig-frontends tools --- ChangeLog | 3 +- configs/lpcxpresso-lpc1768/README.txt | 28 +- configs/lpcxpresso-lpc1768/nsh/appconfig | 58 - configs/lpcxpresso-lpc1768/nsh/defconfig | 1285 ++++++++++++++-------- 4 files changed, 875 insertions(+), 499 deletions(-) delete mode 100644 configs/lpcxpresso-lpc1768/nsh/appconfig diff --git a/ChangeLog b/ChangeLog index 856fd32779..2e15a4a1cf 100644 --- a/ChangeLog +++ b/ChangeLog @@ -6706,4 +6706,5 @@ kconfig-frontends tools (2014-3-1). * configs/lincoln60/nsh: Configuration converted to use the kconfig-frontends tools (2014-3-1). - + * configs/lpcxpresso-lpc1768/nsh: Configuration converted to use the + kconfig-frontends tools (2014-3-1). diff --git a/configs/lpcxpresso-lpc1768/README.txt b/configs/lpcxpresso-lpc1768/README.txt index fc50f2bcb6..da84597835 100644 --- a/configs/lpcxpresso-lpc1768/README.txt +++ b/configs/lpcxpresso-lpc1768/README.txt @@ -755,16 +755,28 @@ Where is one of the following: nsh: Configures the NuttShell (nsh) located at apps/examples/nsh. The Configuration enables both the serial and telnet NSH interfaces. - Support for the board's SPI-based MicroSD card is included - (but not passing tests as of this writing). - NOTE: At present, the value for the SD SPI frequency is too - high and the SD will fail. Setting that frequency to 400000 - removes the problem. TODO: Tune this frequency to some optimal - value. + NOTES: - Jumpers: J55 must be set to provide chip select PIO1_11 signal as - the SD slot chip select. + 1. This configuration uses the mconf-based configuration tool. To + change this configurations using that tool, you should: + + a. Build and install the kconfig-mconf tool. See nuttx/README.txt + and misc/tools/ + + b. Execute 'make menuconfig' in nuttx/ in order to start the + reconfiguration process. + + 2. This configuration has been used for testing the microSD card. + This support is, however, disabled in the base configuration. + + At last attempt, the SPI-based mircroSD does not work at + higher fequencies. Setting the SPI frequency to 400000 + removes the problem. There must be some more optimal + value that could be determined with additional experimetnation. + + Jumpers: J55 must be set to provide chip select PIO1_11 signal as + the SD slot chip select. nx: And example using the NuttX graphics system (NX). This example diff --git a/configs/lpcxpresso-lpc1768/nsh/appconfig b/configs/lpcxpresso-lpc1768/nsh/appconfig deleted file mode 100644 index 1b4a2e23c2..0000000000 --- a/configs/lpcxpresso-lpc1768/nsh/appconfig +++ /dev/null @@ -1,58 +0,0 @@ -############################################################################ -# configs/lpcxpresso-lpc1768/nsh/appconfig -# -# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# Path to example in apps/examples containing the user_start entry point - -CONFIGURED_APPS += examples/nsh - -# NSH library - -CONFIGURED_APPS += system/readline -CONFIGURED_APPS += nshlib - -# Networking support - -ifeq ($(CONFIG_NET),y) -CONFIGURED_APPS += netutils/uiplib -CONFIGURED_APPS += netutils/dhcpc -CONFIGURED_APPS += netutils/resolv -CONFIGURED_APPS += netutils/tftpc -CONFIGURED_APPS += netutils/webclient -ifeq ($(CONFIG_NSH_TELNET),y) -CONFIGURED_APPS += netutils/telnetd -endif -endif - - diff --git a/configs/lpcxpresso-lpc1768/nsh/defconfig b/configs/lpcxpresso-lpc1768/nsh/defconfig index f3af6b3824..f5203cbbbc 100644 --- a/configs/lpcxpresso-lpc1768/nsh/defconfig +++ b/configs/lpcxpresso-lpc1768/nsh/defconfig @@ -1,242 +1,314 @@ -############################################################################ -# configs/lpcxpresso-lpc1768/nsh/defconfig # -# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration # -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: +CONFIG_NUTTX_NEWCONFIG=y + # -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. +# Build Setup # -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. +# CONFIG_EXPERIMENTAL is not set +# CONFIG_DEFAULT_SMALL is not set +CONFIG_HOST_LINUX=y +# CONFIG_HOST_OSX is not set +# CONFIG_HOST_WINDOWS is not set +# CONFIG_HOST_OTHER is not set + # -############################################################################ +# Build Configuration # -# Architecture Selection +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set + # -CONFIG_ARCH="arm" +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +CONFIG_INTELHEX_BINARY=y +# CONFIG_MOTOROLA_SREC is not set +# CONFIG_RAW_BINARY is not set + +# +# Customize Header Files +# +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +# CONFIG_DEBUG is not set +CONFIG_ARCH_HAVE_STACKCHECK=y +# CONFIG_ARCH_HAVE_HEAPCHECK is not set +# CONFIG_DEBUG_SYMBOLS is not set +CONFIG_ARCH_HAVE_CUSTOMOPT=y +# CONFIG_DEBUG_NOOPT is not set +# CONFIG_DEBUG_CUSTOMOPT is not set +CONFIG_DEBUG_FULLOPT=y + +# +# System Type +# +# CONFIG_ARCH_8051 is not set CONFIG_ARCH_ARM=y -CONFIG_ARCH_CORTEXM3=y -CONFIG_ARCH_CHIP="lpc17xx" +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_A1X is not set +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_IMX is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_KL is not set +# CONFIG_ARCH_CHIP_LM is not set CONFIG_ARCH_CHIP_LPC17XX=y +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_NUC1XX is not set +# CONFIG_ARCH_CHIP_SAMA5 is not set +# CONFIG_ARCH_CHIP_SAMD is not set +# CONFIG_ARCH_CHIP_SAM34 is not set +# CONFIG_ARCH_CHIP_STM32 is not set +# CONFIG_ARCH_CHIP_STR71X is not set +# CONFIG_ARCH_ARM7TDMI is not set +# CONFIG_ARCH_ARM926EJS is not set +# CONFIG_ARCH_ARM920T is not set +# CONFIG_ARCH_CORTEXM0 is not set +CONFIG_ARCH_CORTEXM3=y +# CONFIG_ARCH_CORTEXM4 is not set +# CONFIG_ARCH_CORTEXA5 is not set +# CONFIG_ARCH_CORTEXA8 is not set +CONFIG_ARCH_FAMILY="armv7-m" +CONFIG_ARCH_CHIP="lpc17xx" +# CONFIG_ARMV7M_USEBASEPRI is not set +CONFIG_ARCH_HAVE_CMNVECTOR=y +# CONFIG_ARMV7M_CMNVECTOR is not set +# CONFIG_ARCH_HAVE_FPU is not set +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARMV7M_MPU is not set + +# +# ARMV7M Configuration Options +# +# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set +CONFIG_ARMV7M_TOOLCHAIN_CODEREDL=y +# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set +# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set +# CONFIG_GPIO_IRQ is not set + +# +# LPC17xx Configuration Options +# +# CONFIG_ARCH_CHIP_LPC1751 is not set +# CONFIG_ARCH_CHIP_LPC1752 is not set +# CONFIG_ARCH_CHIP_LPC1754 is not set +# CONFIG_ARCH_CHIP_LPC1756 is not set +# CONFIG_ARCH_CHIP_LPC1758 is not set +# CONFIG_ARCH_CHIP_LPC1759 is not set +# CONFIG_ARCH_CHIP_LPC1764 is not set +# CONFIG_ARCH_CHIP_LPC1765 is not set +# CONFIG_ARCH_CHIP_LPC1766 is not set +# CONFIG_ARCH_CHIP_LPC1767 is not set CONFIG_ARCH_CHIP_LPC1768=y -CONFIG_ARCH_BOARD="lpcxpresso-lpc1768" -CONFIG_ARCH_BOARD_LPCXPRESSO=y -CONFIG_BOARD_LOOPSPERMSEC=8079 -CONFIG_RAM_SIZE=32768 -CONFIG_RAM_START=0x10000000 -CONFIG_ARCH_IRQPRIO=y -CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_ARCH_STACKDUMP=y -CONFIG_ARCH_BOOTLOADER=n -CONFIG_ARCH_LEDS=y -CONFIG_ARCH_BUTTONS=n -CONFIG_ARCH_CALIBRATION=n -CONFIG_ARCH_DMA=n +# CONFIG_ARCH_CHIP_LPC1769 is not set +# CONFIG_ARCH_CHIP_LPC1773 is not set +# CONFIG_ARCH_CHIP_LPC1774 is not set +# CONFIG_ARCH_CHIP_LPC1776 is not set +# CONFIG_ARCH_CHIP_LPC1777 is not set +# CONFIG_ARCH_CHIP_LPC1778 is not set +# CONFIG_ARCH_CHIP_LPC1785 is not set +# CONFIG_ARCH_CHIP_LPC1786 is not set +# CONFIG_ARCH_CHIP_LPC1787 is not set +# CONFIG_ARCH_CHIP_LPC1788 is not set +CONFIG_ARCH_FAMILY_LPC176X=y # -# Identify toolchain and linker options -# -CONFIG_LPC17_CODESOURCERYW=n -CONFIG_LPC17_CODESOURCERYL=n -CONFIG_LPC17_DEVKITARM=n -CONFIG_LPC17_BUILDROOT=n -CONFIG_LPC17_CODEREDW=n -CONFIG_LPC17_CODEREDL=y - -# -# Individual subsystems can be enabled: +# LPC17xx Peripheral Support # +CONFIG_LPC17_MAINOSC=y +CONFIG_LPC17_PLL0=y +CONFIG_LPC17_PLL1=y CONFIG_LPC17_ETHERNET=y -CONFIG_LPC17_USBHOST=n -CONFIG_LPC17_USBOTG=n -CONFIG_LPC17_USBDEV=n -CONFIG_LPC17_UART0=n -CONFIG_LPC17_UART1=n -CONFIG_LPC17_UART2=n +# CONFIG_LPC17_USBHOST is not set +# CONFIG_LPC17_USBDEV is not set +# CONFIG_LPC17_UART0 is not set +# CONFIG_LPC17_UART1 is not set +# CONFIG_LPC17_UART2 is not set CONFIG_LPC17_UART3=y -CONFIG_LPC17_CAN1=n -CONFIG_LPC17_CAN2=n -CONFIG_LPC17_SPI=n -CONFIG_LPC17_SSP0=n +# CONFIG_LPC17_UART4 is not set +# CONFIG_LPC17_CAN1 is not set +# CONFIG_LPC17_CAN2 is not set +# CONFIG_LPC17_SPI is not set +# CONFIG_LPC17_SSP0 is not set CONFIG_LPC17_SSP1=y -CONFIG_LPC17_I2C0=n -CONFIG_LPC17_I2C1=n -CONFIG_LPC17_I2S=n -CONFIG_LPC17_TMR0=n -CONFIG_LPC17_TMR1=n -CONFIG_LPC17_TMR2=n -CONFIG_LPC17_TMR3=n -CONFIG_LPC17_RIT=n -CONFIG_LPC17_PWM0=n -CONFIG_LPC17_MCPWM=n -CONFIG_LPC17_QEI=n -CONFIG_LPC17_RTC=n -CONFIG_LPC17_WDT=n -CONFIG_LPC17_ADC=n -CONFIG_LPC17_DAC=n -CONFIG_LPC17_GPDMA=n +# CONFIG_LPC17_I2C0 is not set +# CONFIG_LPC17_I2C1 is not set +# CONFIG_LPC17_I2C2 is not set +# CONFIG_LPC17_I2S is not set +# CONFIG_LPC17_TMR0 is not set +# CONFIG_LPC17_TMR1 is not set +# CONFIG_LPC17_TMR2 is not set +# CONFIG_LPC17_TMR3 is not set +# CONFIG_LPC17_RIT is not set +# CONFIG_LPC17_PWM0 is not set +# CONFIG_LPC17_MCPWM is not set +# CONFIG_LPC17_QEI is not set +# CONFIG_LPC17_RTC is not set +# CONFIG_LPC17_WDT is not set +# CONFIG_LPC17_ADC is not set +# CONFIG_LPC17_DAC is not set +# CONFIG_LPC17_GPDMA is not set +# CONFIG_LPC17_FLASH is not set # -# LPC17xx specific serial device driver settings +# External Memory Configuration # -CONFIG_UART0_SERIAL_CONSOLE=n -CONFIG_UART1_SERIAL_CONSOLE=n -CONFIG_UART2_SERIAL_CONSOLE=n -CONFIG_UART3_SERIAL_CONSOLE=y - -CONFIG_UART0_TXBUFSIZE=256 -CONFIG_UART1_TXBUFSIZE=256 -CONFIG_UART2_TXBUFSIZE=256 -CONFIG_UART3_TXBUFSIZE=256 - -CONFIG_UART0_RXBUFSIZE=256 -CONFIG_UART1_RXBUFSIZE=256 -CONFIG_UART2_RXBUFSIZE=256 -CONFIG_UART3_RXBUFSIZE=256 - -CONFIG_UART0_BAUD=115200 -CONFIG_UART2_BAUD=115200 -CONFIG_UART3_BAUD=115200 -CONFIG_UART1_BAUD=115200 - -CONFIG_UART0_BITS=8 -CONFIG_UART1_BITS=8 -CONFIG_UART2_BITS=8 -CONFIG_UART3_BITS=8 - -CONFIG_UART0_PARITY=0 -CONFIG_UART1_PARITY=0 -CONFIG_UART2_PARITY=0 -CONFIG_UART3_PARITY=0 - -CONFIG_UART0_2STOP=0 -CONFIG_UART1_2STOP=0 -CONFIG_UART2_2STOP=0 -CONFIG_UART3_2STOP=0 # -# LPC17xx specific PHY/Ethernet device driver settings +# Serial driver options +# +# CONFIG_SERIAL_TERMIOS is not set + +# +# Ethernet driver options # -CONFIG_NETDEVICES=y -CONFIG_ETH0_PHY_KS8721=n -CONFIG_ETH0_PHY_DP83848C=n -CONFIG_ETH0_PHY_LAN8720=y CONFIG_PHY_AUTONEG=y -CONFIG_PHY_SPEED100=n -CONFIG_PHY_FDUPLEX=y CONFIG_NET_EMACRAM_SIZE=8192 CONFIG_NET_NTXDESC=7 CONFIG_NET_NRXDESC=7 -CONFIG_NET_REGDEBUG=n +CONFIG_NET_PRIORITY=0 +# CONFIG_NET_WOL is not set +# CONFIG_NET_HASH is not set +# CONFIG_NET_MULTICAST is not set # -# General build options +# Architecture Options # -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=y -CONFIG_MOTOROLA_SREC=n -CONFIG_RAW_BINARY=n +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_HAVE_IRQPRIO=y +# CONFIG_CUSTOM_STACK is not set +# CONFIG_ADDRENV is not set +CONFIG_ARCH_HAVE_VFORK=y +# CONFIG_ARCH_HAVE_MMU is not set +# CONFIG_ARCH_NAND_HWECC is not set +CONFIG_ARCH_IRQPRIO=y +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +# CONFIG_ARCH_HAVE_RAMFUNCS is not set +CONFIG_ARCH_HAVE_RAMVECTORS=y +# CONFIG_ARCH_RAMVECTORS is not set # -# General OS setup +# Board Settings # -CONFIG_USER_ENTRYPOINT="nsh_main" -CONFIG_DEBUG=n -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=n -CONFIG_MM_REGIONS=2 -CONFIG_ARCH_LOWPUTC=y +CONFIG_BOARD_LOOPSPERMSEC=8079 +# CONFIG_ARCH_CALIBRATION is not set + +# +# Interrupt options +# +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 +CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y +# CONFIG_ARCH_HIPRI_INTERRUPT is not set + +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Boot Memory Configuration +# +CONFIG_RAM_START=0x10000000 +CONFIG_RAM_SIZE=32768 +# CONFIG_ARCH_HAVE_SDRAM is not set + +# +# Board Selection +# +CONFIG_ARCH_BOARD_LPCXPRESSO=y +# CONFIG_ARCH_BOARD_MBED is not set +# CONFIG_ARCH_BOARD_NUCLEUS2G is not set +# CONFIG_ARCH_BOARD_ZKITARM is not set +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="lpcxpresso-lpc1768" + +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y +CONFIG_NSH_MMCSDMINOR=0 +CONFIG_NSH_MMCSDSLOTNO=0 + +# +# Board-Specific Options +# + +# +# RTOS Features +# +# CONFIG_BOARD_INITIALIZE is not set +CONFIG_MSEC_PER_TICK=10 +# CONFIG_SYSTEM_TIME64 is not set CONFIG_RR_INTERVAL=200 -CONFIG_SCHED_INSTRUMENTATION=n +# CONFIG_SCHED_CPULOAD is not set +# CONFIG_SCHED_INSTRUMENTATION is not set CONFIG_TASK_NAME_SIZE=0 +# CONFIG_SCHED_HAVE_PARENT is not set +# CONFIG_JULIAN_TIME is not set CONFIG_START_YEAR=2011 CONFIG_START_MONTH=4 CONFIG_START_DAY=12 -CONFIG_GREGORIAN_TIME=n -CONFIG_JULIAN_TIME=n CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=n -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n +# CONFIG_MUTEX_TYPES is not set +# CONFIG_PRIORITY_INHERITANCE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set CONFIG_SDCLONE_DISABLE=y -CONFIG_NXFLAT=n -CONFIG_SCHED_WORKQUEUE=n -CONFIG_SCHED_WORKPRIORITY=192 -CONFIG_SCHED_WORKPERIOD=50000 -CONFIG_SCHED_WORKSTACKSIZE=1024 -CONFIG_SIG_SIGWORK=17 +# CONFIG_SCHED_WAITPID is not set +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +# CONFIG_DISABLE_ENVIRON is not set # -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. +# Signal Numbers # -# There are certain dependency relationships in these -# features. -# -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. -# -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=n -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=n -CONFIG_DISABLE_MOUNTPOINT=n -CONFIG_DISABLE_ENVIRON=n -CONFIG_DISABLE_POLL=y - -# -# Misc libc settings -# -CONFIG_NOPRINTF_FIELDWIDTH=n - -# -# Allow for architecture optimized implementations -# -# The architecture can provide optimized versions of the -# following to improve system performance -# -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 # # Sizes of configurable things (0 disables) @@ -247,251 +319,600 @@ CONFIG_NPTHREAD_KEYS=4 CONFIG_NFILE_DESCRIPTORS=8 CONFIG_NFILE_STREAMS=8 CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=64 -CONFIG_NUNGET_CHARS=2 CONFIG_PREALLOC_MQ_MSGS=4 CONFIG_MQ_MAXMSGSIZE=32 CONFIG_MAX_WDOGPARMS=2 CONFIG_PREALLOC_WDOGS=4 CONFIG_PREALLOC_TIMERS=4 -# -# Filesystem configuration -# -CONFIG_FS_FAT=y -CONFIG_FS_ROMFS=n - -# -# Maintain legacy build behavior (revisit) -# - -CONFIG_MMCSD=y -CONFIG_MMCSD_SPI=y -CONFIG_MTD=y - -# -# SPI-based MMC/SD driver -# -CONFIG_MMCSD_NSLOTS=1 -CONFIG_MMCSD_READONLY=n -CONFIG_MMCSD_SPICLOCK=12500000 - -# -# Block driver buffering -# -CONFIG_FS_READAHEAD=n -CONFIG_FS_WRITEBUFFER=n - -# -# SDIO-based MMC/SD driver -# -CONFIG_SDIO_DMA=n -CONFIG_MMCSD_MMCSUPPORT=n -CONFIG_MMCSD_HAVECARDDETECT=n - -# -# TCP/IP and UDP support via uIP -# -CONFIG_NET=y -CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=8 -CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=562 -CONFIG_NET_TCP=y -CONFIG_NET_TCP_CONNS=8 -CONFIG_NET_TCP_READAHEAD=y -CONFIG_NET_NTCP_READAHEAD_BUFFERS=16 -CONFIG_NET_TCPBACKLOG=n -CONFIG_NET_MAX_LISTENPORTS=8 -CONFIG_NET_UDP=y -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=8 -CONFIG_NET_ICMP=y -CONFIG_NET_ICMP_PING=y -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=y -#CONFIG_NET_RECEIVE_WINDOW= -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_BROADCAST=n - -# -# UIP Network Utilities -# -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 - -# -# USB Device Configuration -# -CONFIG_USBDEV=n -CONFIG_USBDEV_ISOCHRONOUS=n -CONFIG_USBDEV_DUALSPEED=n -CONFIG_USBDEV_SELFPOWERED=y -CONFIG_USBDEV_REMOTEWAKEUP=n -CONFIG_USBDEV_MAXPOWER=100 -CONFIG_USBDEV_TRACE=n -CONFIG_USBDEV_TRACE_NRECORDS=128 - -# -# LPC17xx USB Configuration -# USB Host Configuration -# -CONFIG_USBHOST=n -CONFIG_USBHOST_NPREALLOC=0 -CONFIG_USBHOST_BULK_DISABLE=n -CONFIG_USBHOST_INT_DISABLE=y -CONFIG_USBHOST_ISOC_DISABLE=y - -# -# LPC17xx USB Device Configuration -# -CONFIG_LPC17_USBDEV_FRAME_INTERRUPT=n -CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT=n -CONFIG_LPC17_USBDEV_DMA=n -CONFIG_LPC17_USBDEV_NDMADESCRIPTORS=0 -CONFIG_LPC17_USBDEV_NOVBUS=y -CONFIG_LPC17_USBDEV_NOLED=y - -# -# LPC17xx USB Host Configuration -# -# OHCI RAM layout: -# -CONFIG_USBHOST_OHCIRAM_SIZE=1536 -CONFIG_USBHOST_NEDS=2 -CONFIG_USBHOST_NTDS=3 -CONFIG_USBHOST_TDBUFFERS=3 -CONFIG_USBHOST_TDBUFSIZE=128 -CONFIG_USBHOST_IOBUFSIZE=512 - -# -# USB Serial Device Configuration -# -CONFIG_PL2303=n -CONFIG_PL2303_EPINTIN=1 -CONFIG_PL2303_EPBULKOUT=2 -CONFIG_PL2303_EPBULKIN=5 -CONFIG_PL2303_NWRREQS=4 -CONFIG_PL2303_NRDREQS=4 -CONFIG_PL2303_VENDORID=0x067b -CONFIG_PL2303_PRODUCTID=0x2303 -CONFIG_PL2303_VENDORSTR="Nuttx" -CONFIG_PL2303_PRODUCTSTR="USBdev Serial" -CONFIG_PL2303_RXBUFSIZE=512 -CONFIG_PL2303_TXBUFSIZE=512 - -# -# USB Storage Device Configuration -# -CONFIG_USBMSC=n -CONFIG_USBMSC_EP0MAXPACKET=64 -CONFIG_USBMSC_EPBULKOUT=2 -CONFIG_USBMSC_EPBULKIN=5 -CONFIG_USBMSC_NRDREQS=2 -CONFIG_USBMSC_NWRREQS=2 -CONFIG_USBMSC_BULKINREQLEN=256 -CONFIG_USBMSC_BULKOUTREQLEN=256 -CONFIG_USBMSC_VENDORID=0x584e -CONFIG_USBMSC_VENDORSTR="NuttX" -CONFIG_USBMSC_PRODUCTID=0x5342 -CONFIG_USBMSC_PRODUCTSTR="USBdev Storage" -CONFIG_USBMSC_VERSIONNO=0x0399 -CONFIG_USBMSC_REMOVABLE=y - -# -# Settings for examples/uip -# -CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002 -CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00 -CONFIG_EXAMPLES_UIP_DHCPC=n - -# -# Settings for examples/nettest -# -CONFIG_EXAMPLES_NETTEST_SERVER=n -CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n -CONFIG_EXAMPLES_NETTEST_NOMAC=y -CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002 -CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00 -CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001 - -# -# Settings for examples/ostest -# -CONFIG_EXAMPLES_OSTEST_LOOPS=1 -CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 -CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 - -# -# Settings for apps/nshlib -# -CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_STRERROR=n -CONFIG_NSH_LINELEN=64 -CONFIG_NSH_NESTDEPTH=3 -CONFIG_NSH_DISABLESCRIPT=n -CONFIG_NSH_DISABLEBG=n -CONFIG_NSH_ROMFSETC=n -CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=y -CONFIG_NSH_ARCHINIT=y -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=y -CONFIG_NSH_IPADDR=0x0a000002 -CONFIG_NSH_DRIPADDR=0x0a000001 -CONFIG_NSH_NETMASK=0xffffff00 -CONFIG_NSH_ROMFSMOUNTPT="/etc" -CONFIG_NSH_INITSCRIPT="init.d/rcS" -CONFIG_NSH_ROMFSDEVNO=0 -CONFIG_NSH_ROMFSSECTSIZE=64 -CONFIG_NSH_FATDEVNO=1 -CONFIG_NSH_FATSECTSIZE=512 -CONFIG_NSH_FATNSECTORS=1024 -CONFIG_NSH_FATMOUNTPT="/tmp" - -# -# Architecture-specific NSH options -# -CONFIG_NSH_MMCSDSPIPORTNO=1 -CONFIG_NSH_MMCSDSLOTNO=0 -CONFIG_NSH_MMCSDMINOR=0 - -# -# Settings for examples/usbserial -# -CONFIG_EXAMPLES_USBSERIAL_INONLY=n -CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n -CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n -CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n - -CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n -CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n -CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n -CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n -CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n - -# -# Settings for system/usbmsc -# -CONFIG_SYSTEM_USBMSC_NLUNS=1 -CONFIG_SYSTEM_USBMSC_DEVMINOR1=0 -CONFIG_SYSTEM_USBMSC_DEVPATH1="/dev/mmcsd0" -CONFIG_SYSTEM_USBMSC_TRACEINIT=n -CONFIG_SYSTEM_USBMSC_TRACECLASS=n -CONFIG_SYSTEM_USBMSC_TRACETRANSFERS=n -CONFIG_SYSTEM_USBMSC_TRACECONTROLLER=n -CONFIG_SYSTEM_USBMSC_TRACEINTERRUPTS=n - # # Stack and heap information # -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n CONFIG_IDLETHREAD_STACKSIZE=1024 CONFIG_USERMAIN_STACKSIZE=2048 CONFIG_PTHREAD_STACK_MIN=256 CONFIG_PTHREAD_STACK_DEFAULT=2048 + +# +# Device Drivers +# +CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set +# CONFIG_PWM is not set +# CONFIG_ARCH_HAVE_I2CRESET is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_I2S is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_VIDEO_DEVICES is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_LCD is not set +CONFIG_MMCSD=y +CONFIG_MMCSD_NSLOTS=1 +# CONFIG_MMCSD_READONLY is not set +# CONFIG_MMCSD_MULTIBLOCK_DISABLE is not set +# CONFIG_MMCSD_MMCSUPPORT is not set +# CONFIG_MMCSD_HAVECARDDETECT is not set +# CONFIG_ARCH_HAVE_SDIO is not set +CONFIG_MTD=y + +# +# MTD Configuration +# +# CONFIG_MTD_PARTITION is not set +# CONFIG_MTD_BYTE_WRITE is not set +# CONFIG_MTD_CONFIG is not set +# CONFIG_MTD_CONFIG_RAM_CONSOLIDATE is not set + +# +# MTD Device Drivers +# +# CONFIG_MTD_NAND is not set +# CONFIG_RAMMTD is not set +# CONFIG_MTD_AT24XX is not set +# CONFIG_MTD_AT25 is not set +# CONFIG_MTD_AT45DB is not set +# CONFIG_MTD_M25P is not set +# CONFIG_MTD_SMART is not set +# CONFIG_MTD_RAMTRON is not set +# CONFIG_MTD_SST25 is not set +# CONFIG_MTD_SST25XX is not set +# CONFIG_MTD_SST39FV is not set +# CONFIG_MTD_W25 is not set +CONFIG_NETDEVICES=y + +# +# General Ethernet MAC Driver Options +# +# CONFIG_NETDEV_MULTINIC is not set + +# +# External Ethernet MAC Device Support +# +# CONFIG_NET_DM90x0 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ENCX24J600 is not set +# CONFIG_NET_E1000 is not set +# CONFIG_NET_SLIP is not set +# CONFIG_NET_VNET is not set + +# +# External Ethernet PHY Device Support +# +# CONFIG_ETH0_PHY_NONE is not set +# CONFIG_ETH0_PHY_KS8721 is not set +# CONFIG_ETH0_PHY_KSZ8051 is not set +# CONFIG_ETH0_PHY_KSZ90x1 is not set +# CONFIG_ETH0_PHY_DP83848C is not set +CONFIG_ETH0_PHY_LAN8720=y +# CONFIG_ETH0_PHY_DM9161 is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +# CONFIG_SERCOMM_CONSOLE is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_UART3=y + +# +# USART Configuration +# +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +CONFIG_UART3_SERIAL_CONSOLE=y +# CONFIG_NO_SERIAL_CONSOLE is not set + +# +# UART3 Configuration +# +CONFIG_UART3_RXBUFSIZE=256 +CONFIG_UART3_TXBUFSIZE=256 +CONFIG_UART3_BAUD=115200 +CONFIG_UART3_BITS=8 +CONFIG_UART3_PARITY=0 +CONFIG_UART3_2STOP=0 +# CONFIG_UART3_IFLOWCONTROL is not set +# CONFIG_UART3_OFLOWCONTROL is not set +# CONFIG_SERIAL_IFLOWCONTROL is not set +# CONFIG_SERIAL_OFLOWCONTROL is not set +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set + +# +# System Logging Device Options +# + +# +# System Logging +# +# CONFIG_RAMLOG is not set + +# +# Networking Support +# +CONFIG_ARCH_HAVE_NET=y +CONFIG_ARCH_HAVE_PHY=y +CONFIG_NET=y +# CONFIG_NET_NOINTS is not set +# CONFIG_NET_MULTIBUFFER is not set +# CONFIG_NET_PROMISCUOUS is not set +CONFIG_NSOCKET_DESCRIPTORS=8 +CONFIG_NET_NACTIVESOCKETS=16 +CONFIG_NET_SOCKOPTS=y +# CONFIG_NET_SOLINGER is not set +CONFIG_NET_BUFSIZE=562 +# CONFIG_NET_TCPURGDATA is not set + +# +# TCP/IP Networking +# +CONFIG_NET_TCP=y +CONFIG_NET_TCP_CONNS=8 +CONFIG_NET_MAX_LISTENPORTS=8 +CONFIG_NET_TCP_READAHEAD=y +CONFIG_NET_TCP_READAHEAD_BUFSIZE=562 +CONFIG_NET_NTCP_READAHEAD_BUFFERS=16 +# CONFIG_NET_TCP_WRITE_BUFFERS is not set +CONFIG_NET_TCP_RECVDELAY=0 +# CONFIG_NET_TCPBACKLOG is not set +# CONFIG_NET_TCP_SPLIT is not set +# CONFIG_NET_SENDFILE is not set + +# +# UDP Networking +# +CONFIG_NET_UDP=y +CONFIG_NET_UDP_CHECKSUMS=y +CONFIG_NET_UDP_CONNS=8 +CONFIG_NET_BROADCAST=y +# CONFIG_NET_RXAVAIL is not set +CONFIG_NET_ICMP=y +CONFIG_NET_ICMP_PING=y +# CONFIG_NET_PINGADDRCONF is not set +# CONFIG_NET_IGMP is not set +CONFIG_NET_STATISTICS=y +CONFIG_NET_RECEIVE_WINDOW=536 +CONFIG_NET_ARPTAB_SIZE=16 +# CONFIG_NET_ARP_IPIN is not set +# CONFIG_NET_ROUTE is not set + +# +# File Systems +# + +# +# File system configuration +# +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set +CONFIG_FS_READABLE=y +CONFIG_FS_WRITABLE=y +# CONFIG_FS_RAMMAP is not set +CONFIG_FS_FAT=y +# CONFIG_FAT_LCNAMES is not set +# CONFIG_FAT_LFN is not set +# CONFIG_FS_FATTIME is not set +# CONFIG_FAT_DMAMEMORY is not set +# CONFIG_NFS is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set +# CONFIG_FS_SMARTFS is not set +# CONFIG_FS_PROCFS is not set + +# +# System Logging +# +# CONFIG_SYSLOG_ENABLE is not set +# CONFIG_SYSLOG is not set + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_MULTIHEAP is not set +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=2 +# CONFIG_ARCH_HAVE_HEAP2 is not set +# CONFIG_GRAN is not set + +# +# Audio Support +# +# CONFIG_AUDIO is not set + +# +# Binary Formats +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_BINFMT_EXEPATH is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +# CONFIG_BUILTIN is not set +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# + +# +# Standard C Library Options +# +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +CONFIG_LIB_HOMEDIR="/" +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +CONFIG_LIB_RAND_ORDER=1 +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set + +# +# Non-standard Library Support +# +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +# CONFIG_HAVE_CXX is not set + +# +# Application Configuration +# + +# +# Built-In Applications +# + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_CONFIGDATA is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_NETTEST is not set +# CONFIG_EXAMPLES_NRF24L01TERM is not set +CONFIG_EXAMPLES_NSH=y +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PASHELLO is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POLL is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_TCPECHO is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_DISCOVER is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set +# CONFIG_EXAMPLES_WGET is not set + +# +# Graphics Support +# +# CONFIG_TIFF is not set + +# +# Interpreters +# +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# Network Utilities +# + +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPC is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +CONFIG_NETUTILS_RESOLV=y +CONFIG_NET_RESOLV_ENTRIES=4 +CONFIG_NET_RESOLV_MAXRESPONSE=96 +# CONFIG_NETUTILS_SMTP is not set +CONFIG_NETUTILS_TELNETD=y +CONFIG_NETUTILS_TFTPC=y +# CONFIG_NETUTILS_THTTPD is not set +CONFIG_NETUTILS_UIPLIB=y +CONFIG_NETUTILS_WEBCLIENT=y +CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)" +# CONFIG_NETUTILS_WEBSERVER is not set +# CONFIG_NETUTILS_DISCOVER is not set +# CONFIG_NETUTILS_XMLRPC is not set + +# +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y +CONFIG_NSH_READLINE=y +# CONFIG_NSH_CLE is not set + +# +# Disable Individual commands +# +# CONFIG_NSH_DISABLE_ADDROUTE is not set +# CONFIG_NSH_DISABLE_CAT is not set +# CONFIG_NSH_DISABLE_CD is not set +# CONFIG_NSH_DISABLE_CP is not set +# CONFIG_NSH_DISABLE_CMP is not set +# CONFIG_NSH_DISABLE_DD is not set +# CONFIG_NSH_DISABLE_DF is not set +# CONFIG_NSH_DISABLE_DELROUTE is not set +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_FREE is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_HEXDUMP is not set +# CONFIG_NSH_DISABLE_IFCONFIG is not set +# CONFIG_NSH_DISABLE_KILL is not set +# CONFIG_NSH_DISABLE_LOSETUP is not set +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MB is not set +# CONFIG_NSH_DISABLE_MKDIR is not set +# CONFIG_NSH_DISABLE_MKFATFS is not set +# CONFIG_NSH_DISABLE_MKFIFO is not set +# CONFIG_NSH_DISABLE_MKRD is not set +# CONFIG_NSH_DISABLE_MH is not set +# CONFIG_NSH_DISABLE_MOUNT is not set +# CONFIG_NSH_DISABLE_MW is not set +# CONFIG_NSH_DISABLE_PS is not set +# CONFIG_NSH_DISABLE_PING is not set +# CONFIG_NSH_DISABLE_PUT is not set +# CONFIG_NSH_DISABLE_PWD is not set +# CONFIG_NSH_DISABLE_RM is not set +# CONFIG_NSH_DISABLE_RMDIR is not set +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SH is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +# CONFIG_NSH_DISABLE_TEST is not set +# CONFIG_NSH_DISABLE_UMOUNT is not set +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +# CONFIG_NSH_DISABLE_WGET is not set +# CONFIG_NSH_DISABLE_XD is not set + +# +# Configure Command Options +# +CONFIG_NSH_CMDOPT_DF_H=y +CONFIG_NSH_CODECS_BUFSIZE=128 +CONFIG_NSH_CMDOPT_HEXDUMP=y +CONFIG_NSH_FILEIOSIZE=512 +CONFIG_NSH_LINELEN=64 +# CONFIG_NSH_DISABLE_SEMICOLON is not set +CONFIG_NSH_CMDPARMS=y +CONFIG_NSH_TMPDIR="/tmp" +CONFIG_NSH_MAXARGUMENTS=6 +CONFIG_NSH_ARGCAT=y +CONFIG_NSH_NESTDEPTH=3 +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLE_ITEF is not set +# CONFIG_NSH_DISABLE_LOOPS is not set +# CONFIG_NSH_DISABLEBG is not set +CONFIG_NSH_CONSOLE=y + +# +# USB Trace Support +# +# CONFIG_NSH_CONDEV is not set +CONFIG_NSH_ARCHINIT=y +CONFIG_NSH_TELNET=y +CONFIG_NSH_TELNETD_PORT=23 +CONFIG_NSH_TELNETD_DAEMONPRIO=100 +CONFIG_NSH_TELNETD_DAEMONSTACKSIZE=2048 +CONFIG_NSH_TELNETD_CLIENTPRIO=100 +CONFIG_NSH_TELNETD_CLIENTSTACKSIZE=2048 +CONFIG_NSH_IOBUFFER_SIZE=512 +# CONFIG_NSH_TELNET_LOGIN is not set +CONFIG_NSH_IPADDR=0x0a000002 +CONFIG_NSH_DRIPADDR=0x0a000001 +CONFIG_NSH_NETMASK=0xffffff00 +# CONFIG_NSH_DNS is not set +CONFIG_NSH_NOMAC=y +CONFIG_NSH_MAX_ROUNDTRIP=20 + +# +# NxWidgets/NxWM +# + +# +# Platform-specific Support +# +# CONFIG_PLATFORM_CONFIGDATA is not set + +# +# System Libraries and NSH Add-Ons +# + +# +# USB CDC/ACM Device Commands +# + +# +# USB Composite Device Commands +# + +# +# Custom Free Memory Command +# +# CONFIG_SYSTEM_FREE is not set + +# +# I2C tool +# + +# +# INI File Parser +# +# CONFIG_SYSTEM_INIFILE is not set + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# FLASH Erase-all Command +# + +# +# NxPlayer media player library / command Line +# +# CONFIG_SYSTEM_NXPLAYER is not set + +# +# RAM test +# +# CONFIG_SYSTEM_RAMTEST is not set + +# +# readline() +# +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +# CONFIG_SYSTEM_SYSINFO is not set + +# +# USB Monitor +# + +# +# EMACS-like Command Line Editor +# +# CONFIG_SYSTEM_CLE is not set + +# +# VI Work-Alike Editor +# +# CONFIG_SYSTEM_VI is not set + +# +# Stack Monitor +# + +# +# USB Mass Storage Device Commands +# + +# +# Zmodem Commands +# +# CONFIG_SYSTEM_ZMODEM is not set