OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity
incubator-nuttx/tools/mpfs/Config.mk

38 lines
1.6 KiB
Makefile
Raw Normal View History

tools/mpfs: prepare OpenSBI image Polarfire Icicle board has only (128K - 256) bytes for the bootloader in the non-volatile eNVM. This space is barely enough for running NuttX. If OpenSBI is selected, it will be placed in DDR. This all means the nuttx.bin file grows into gigabyte size, filling the unused space (ddr - envm) with zeroes. The memory layout is as follows: MEMORY { ddr (rx) : ORIGIN = 0x80000000, LENGTH = 4M envm (rx) : ORIGIN = 0x20220100, LENGTH = 128K - 256 l2lim (rwx) : ORIGIN = 0x08000000, LENGTH = 1024k l2zerodevice (rwx) : ORIGIN = 0x0A000000, LENGTH = 512k } OpenSBI library is used as a separate binary, which is stored into eMMC or SD-card. It is then loaded into its precise location in DDR. Thus, we separate OpenSBI from NuttX and end up with two images by utilizing the objcopy options: --only-section=sectionpattern (-j in short) --remove-section=sectionpattern (-R in short) This is only valid when CONFIG_MPFS_OPENSBI is set. Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
2022-01-04 14:38:44 +08:00
############################################################################
# tools/mpfs/Config.mk
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership. The
# ASF licenses this file to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance with the
# License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
#
############################################################################
# These are the macros that will be used in the NuttX make system to compile
# and assembly source files and to insert the resulting object files into an
# archive. These replace the default definitions at tools/Config.mk
# POSTBUILD -- Perform post build operations
ifeq ($(CONFIG_MPFS_OPENSBI),y)
define POSTBUILD
$(Q) echo "SBI: Creating nuttx.sbi file"
mpfs: Remove the ddrstorage section from the OpenSBI package It is not really needed; g_hart_stacks is only used during SBI init as a temporary stack area. We can use the scratch area buffers for this, as the scratch areas define almost 4K of extra space, which is used for exception stacks anyway.
2022-08-09 19:29:24 +08:00
$(Q) $(OBJCOPY) -O binary -j .text.sbi $(BIN) nuttx.sbi
tools/mpfs: prepare OpenSBI image Polarfire Icicle board has only (128K - 256) bytes for the bootloader in the non-volatile eNVM. This space is barely enough for running NuttX. If OpenSBI is selected, it will be placed in DDR. This all means the nuttx.bin file grows into gigabyte size, filling the unused space (ddr - envm) with zeroes. The memory layout is as follows: MEMORY { ddr (rx) : ORIGIN = 0x80000000, LENGTH = 4M envm (rx) : ORIGIN = 0x20220100, LENGTH = 128K - 256 l2lim (rwx) : ORIGIN = 0x08000000, LENGTH = 1024k l2zerodevice (rwx) : ORIGIN = 0x0A000000, LENGTH = 512k } OpenSBI library is used as a separate binary, which is stored into eMMC or SD-card. It is then loaded into its precise location in DDR. Thus, we separate OpenSBI from NuttX and end up with two images by utilizing the objcopy options: --only-section=sectionpattern (-j in short) --remove-section=sectionpattern (-R in short) This is only valid when CONFIG_MPFS_OPENSBI is set. Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
2022-01-04 14:38:44 +08:00
$(Q) ([ $$? -eq 0 ] && echo "Done.")
$(Q) echo nuttx.sbi >> nuttx.manifest
$(Q) echo "SBI: Removing unnecessary sections from nuttx binary"
mpfs: Remove the ddrstorage section from the OpenSBI package It is not really needed; g_hart_stacks is only used during SBI init as a temporary stack area. We can use the scratch area buffers for this, as the scratch areas define almost 4K of extra space, which is used for exception stacks anyway.
2022-08-09 19:29:24 +08:00
$(Q) $(OBJCOPY) -O binary -R .text.sbi -R .l2_scratchpad $(BIN) nuttx.bin
tools/mpfs: prepare OpenSBI image Polarfire Icicle board has only (128K - 256) bytes for the bootloader in the non-volatile eNVM. This space is barely enough for running NuttX. If OpenSBI is selected, it will be placed in DDR. This all means the nuttx.bin file grows into gigabyte size, filling the unused space (ddr - envm) with zeroes. The memory layout is as follows: MEMORY { ddr (rx) : ORIGIN = 0x80000000, LENGTH = 4M envm (rx) : ORIGIN = 0x20220100, LENGTH = 128K - 256 l2lim (rwx) : ORIGIN = 0x08000000, LENGTH = 1024k l2zerodevice (rwx) : ORIGIN = 0x0A000000, LENGTH = 512k } OpenSBI library is used as a separate binary, which is stored into eMMC or SD-card. It is then loaded into its precise location in DDR. Thus, we separate OpenSBI from NuttX and end up with two images by utilizing the objcopy options: --only-section=sectionpattern (-j in short) --remove-section=sectionpattern (-R in short) This is only valid when CONFIG_MPFS_OPENSBI is set. Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
2022-01-04 14:38:44 +08:00
$(Q) ([ $$? -eq 0 ] && echo "Done.")
endef
endif