incubator-nuttx/wireless/bluetooth/bt_l2cap.h

157 lines
5.2 KiB
C
Raw Normal View History

This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package. NOTE: This selection is marked EXPERIMENTAL. It is incomplete and, hence, untested. It still lacks any low-level Bluetooth drivers and is missing the network interface driver. Squashed commit of the following: wireless/bluetooth: Fixe last of compile issues. Now compiles without errors or warnings. wireless/blutooth: Add macros BT_GETUINT16() and BT_PUTUINT16(). Fix more compile errors. Only one file now generates compile errors. wireless/bluetooth: Add macros BT_LE162HOST() and BT_HOST2LE16(). wireless/bluetooth: Add bt_queue.c; begin fixing comple errors. Many more compile problems yet to resolve. Kconfig edited online with Bitbucket wireless/bluetooth: Struggling to remove nano_fifo logic: Replace buffer management with IOB allocate... this changes some logic and might have some side effects. Use messages queues instead of nano-fifos to inter-task communications. nano-fifos still used in 'frag' logic... whatever that is. wireless/bluetooth: Fix numerous typos introduced by an ill conceived search-and-replace. wireless/bluetooth: Add message queue support to manage interthread buffer transfers. wireless/bluetooth: Replace fibers with kernel threads. wireless/bluetooth: Fix a few initial compile errors. Just the tip of the iceberg. wireless/bluetooth: Complete leveage of the bluetooth stack including public header files. wireless/bluetooth: Complete leverage of all Bluetooth source files. Still missing header files that defines the driver interface. Also missing the network driver implementation. wireless/bluetooth: Fix some naming of static global variables. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package (plus two original files). wireless/bluetooth: Adds five more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: First few files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
2018-03-30 02:35:41 +08:00
/****************************************************************************
* wireless/bluetooth/bt_l2cap.h
This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package. NOTE: This selection is marked EXPERIMENTAL. It is incomplete and, hence, untested. It still lacks any low-level Bluetooth drivers and is missing the network interface driver. Squashed commit of the following: wireless/bluetooth: Fixe last of compile issues. Now compiles without errors or warnings. wireless/blutooth: Add macros BT_GETUINT16() and BT_PUTUINT16(). Fix more compile errors. Only one file now generates compile errors. wireless/bluetooth: Add macros BT_LE162HOST() and BT_HOST2LE16(). wireless/bluetooth: Add bt_queue.c; begin fixing comple errors. Many more compile problems yet to resolve. Kconfig edited online with Bitbucket wireless/bluetooth: Struggling to remove nano_fifo logic: Replace buffer management with IOB allocate... this changes some logic and might have some side effects. Use messages queues instead of nano-fifos to inter-task communications. nano-fifos still used in 'frag' logic... whatever that is. wireless/bluetooth: Fix numerous typos introduced by an ill conceived search-and-replace. wireless/bluetooth: Add message queue support to manage interthread buffer transfers. wireless/bluetooth: Replace fibers with kernel threads. wireless/bluetooth: Fix a few initial compile errors. Just the tip of the iceberg. wireless/bluetooth: Complete leveage of the bluetooth stack including public header files. wireless/bluetooth: Complete leverage of all Bluetooth source files. Still missing header files that defines the driver interface. Also missing the network driver implementation. wireless/bluetooth: Fix some naming of static global variables. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package (plus two original files). wireless/bluetooth: Adds five more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: First few files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
2018-03-30 02:35:41 +08:00
*
* Copyright (c) 2016, Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package. NOTE: This selection is marked EXPERIMENTAL. It is incomplete and, hence, untested. It still lacks any low-level Bluetooth drivers and is missing the network interface driver. Squashed commit of the following: wireless/bluetooth: Fixe last of compile issues. Now compiles without errors or warnings. wireless/blutooth: Add macros BT_GETUINT16() and BT_PUTUINT16(). Fix more compile errors. Only one file now generates compile errors. wireless/bluetooth: Add macros BT_LE162HOST() and BT_HOST2LE16(). wireless/bluetooth: Add bt_queue.c; begin fixing comple errors. Many more compile problems yet to resolve. Kconfig edited online with Bitbucket wireless/bluetooth: Struggling to remove nano_fifo logic: Replace buffer management with IOB allocate... this changes some logic and might have some side effects. Use messages queues instead of nano-fifos to inter-task communications. nano-fifos still used in 'frag' logic... whatever that is. wireless/bluetooth: Fix numerous typos introduced by an ill conceived search-and-replace. wireless/bluetooth: Add message queue support to manage interthread buffer transfers. wireless/bluetooth: Replace fibers with kernel threads. wireless/bluetooth: Fix a few initial compile errors. Just the tip of the iceberg. wireless/bluetooth: Complete leveage of the bluetooth stack including public header files. wireless/bluetooth: Complete leverage of all Bluetooth source files. Still missing header files that defines the driver interface. Also missing the network driver implementation. wireless/bluetooth: Fix some naming of static global variables. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package (plus two original files). wireless/bluetooth: Adds five more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: First few files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
2018-03-30 02:35:41 +08:00
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package. NOTE: This selection is marked EXPERIMENTAL. It is incomplete and, hence, untested. It still lacks any low-level Bluetooth drivers and is missing the network interface driver. Squashed commit of the following: wireless/bluetooth: Fixe last of compile issues. Now compiles without errors or warnings. wireless/blutooth: Add macros BT_GETUINT16() and BT_PUTUINT16(). Fix more compile errors. Only one file now generates compile errors. wireless/bluetooth: Add macros BT_LE162HOST() and BT_HOST2LE16(). wireless/bluetooth: Add bt_queue.c; begin fixing comple errors. Many more compile problems yet to resolve. Kconfig edited online with Bitbucket wireless/bluetooth: Struggling to remove nano_fifo logic: Replace buffer management with IOB allocate... this changes some logic and might have some side effects. Use messages queues instead of nano-fifos to inter-task communications. nano-fifos still used in 'frag' logic... whatever that is. wireless/bluetooth: Fix numerous typos introduced by an ill conceived search-and-replace. wireless/bluetooth: Add message queue support to manage interthread buffer transfers. wireless/bluetooth: Replace fibers with kernel threads. wireless/bluetooth: Fix a few initial compile errors. Just the tip of the iceberg. wireless/bluetooth: Complete leveage of the bluetooth stack including public header files. wireless/bluetooth: Complete leverage of all Bluetooth source files. Still missing header files that defines the driver interface. Also missing the network driver implementation. wireless/bluetooth: Fix some naming of static global variables. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package (plus two original files). wireless/bluetooth: Adds five more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: First few files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
2018-03-30 02:35:41 +08:00
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS
* ; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package. NOTE: This selection is marked EXPERIMENTAL. It is incomplete and, hence, untested. It still lacks any low-level Bluetooth drivers and is missing the network interface driver. Squashed commit of the following: wireless/bluetooth: Fixe last of compile issues. Now compiles without errors or warnings. wireless/blutooth: Add macros BT_GETUINT16() and BT_PUTUINT16(). Fix more compile errors. Only one file now generates compile errors. wireless/bluetooth: Add macros BT_LE162HOST() and BT_HOST2LE16(). wireless/bluetooth: Add bt_queue.c; begin fixing comple errors. Many more compile problems yet to resolve. Kconfig edited online with Bitbucket wireless/bluetooth: Struggling to remove nano_fifo logic: Replace buffer management with IOB allocate... this changes some logic and might have some side effects. Use messages queues instead of nano-fifos to inter-task communications. nano-fifos still used in 'frag' logic... whatever that is. wireless/bluetooth: Fix numerous typos introduced by an ill conceived search-and-replace. wireless/bluetooth: Add message queue support to manage interthread buffer transfers. wireless/bluetooth: Replace fibers with kernel threads. wireless/bluetooth: Fix a few initial compile errors. Just the tip of the iceberg. wireless/bluetooth: Complete leveage of the bluetooth stack including public header files. wireless/bluetooth: Complete leverage of all Bluetooth source files. Still missing header files that defines the driver interface. Also missing the network driver implementation. wireless/bluetooth: Fix some naming of static global variables. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package (plus two original files). wireless/bluetooth: Adds five more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: First few files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
2018-03-30 02:35:41 +08:00
*
****************************************************************************/
#ifndef __WIRELESS_BLUETOOTH_BT_L2CAP_H
#define __WIRELESS_BLUETOOTH_BT_L2CAP_H
This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package. NOTE: This selection is marked EXPERIMENTAL. It is incomplete and, hence, untested. It still lacks any low-level Bluetooth drivers and is missing the network interface driver. Squashed commit of the following: wireless/bluetooth: Fixe last of compile issues. Now compiles without errors or warnings. wireless/blutooth: Add macros BT_GETUINT16() and BT_PUTUINT16(). Fix more compile errors. Only one file now generates compile errors. wireless/bluetooth: Add macros BT_LE162HOST() and BT_HOST2LE16(). wireless/bluetooth: Add bt_queue.c; begin fixing comple errors. Many more compile problems yet to resolve. Kconfig edited online with Bitbucket wireless/bluetooth: Struggling to remove nano_fifo logic: Replace buffer management with IOB allocate... this changes some logic and might have some side effects. Use messages queues instead of nano-fifos to inter-task communications. nano-fifos still used in 'frag' logic... whatever that is. wireless/bluetooth: Fix numerous typos introduced by an ill conceived search-and-replace. wireless/bluetooth: Add message queue support to manage interthread buffer transfers. wireless/bluetooth: Replace fibers with kernel threads. wireless/bluetooth: Fix a few initial compile errors. Just the tip of the iceberg. wireless/bluetooth: Complete leveage of the bluetooth stack including public header files. wireless/bluetooth: Complete leverage of all Bluetooth source files. Still missing header files that defines the driver interface. Also missing the network driver implementation. wireless/bluetooth: Fix some naming of static global variables. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package (plus two original files). wireless/bluetooth: Adds five more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: First few files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
2018-03-30 02:35:41 +08:00
/****************************************************************************
* Included Files
****************************************************************************/
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define BT_L2CAP_CID_ATT 0x0004
#define BT_L2CAP_CID_LE_SIG 0x0005
#define BT_L2CAP_CID_SMP 0x0006
#define BT_L2CAP_REJ_NOT_UNDERSTOOD 0x0000
#define BT_L2CAP_REJ_MTU_EXCEEDED 0x0001
#define BT_L2CAP_REJ_INVALID_CID 0x0002
#define BT_L2CAP_CMD_REJECT 0x01
#define BT_L2CAP_CONN_PARAM_REQ 0x12
#define BT_L2CAP_CONN_PARAM_RSP 0x13
/****************************************************************************
* Public Types
****************************************************************************/
begin_packed_struct struct bt_l2cap_hdr_s
{
uint16_t len;
uint16_t cid;
} end_packed_struct;
begin_packed_struct struct bt_l2cap_sig_hdr_s
{
uint8_t code;
uint8_t ident;
uint16_t len;
} end_packed_struct;
begin_packed_struct struct bt_l2cap_cmd_reject_s
{
uint16_t reason;
uint8_t data[0];
} end_packed_struct;
begin_packed_struct struct bt_l2cap_conn_param_req_s
{
uint16_t min_interval;
uint16_t max_interval;
uint16_t latency;
uint16_t timeout;
} end_packed_struct;
begin_packed_struct struct bt_l2cap_conn_param_rsp_s
{
uint16_t result;
} end_packed_struct;
struct bt_l2cap_chan_s
{
FAR struct bt_l2cap_chan_s *flink;
FAR void *context;
This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package. NOTE: This selection is marked EXPERIMENTAL. It is incomplete and, hence, untested. It still lacks any low-level Bluetooth drivers and is missing the network interface driver. Squashed commit of the following: wireless/bluetooth: Fixe last of compile issues. Now compiles without errors or warnings. wireless/blutooth: Add macros BT_GETUINT16() and BT_PUTUINT16(). Fix more compile errors. Only one file now generates compile errors. wireless/bluetooth: Add macros BT_LE162HOST() and BT_HOST2LE16(). wireless/bluetooth: Add bt_queue.c; begin fixing comple errors. Many more compile problems yet to resolve. Kconfig edited online with Bitbucket wireless/bluetooth: Struggling to remove nano_fifo logic: Replace buffer management with IOB allocate... this changes some logic and might have some side effects. Use messages queues instead of nano-fifos to inter-task communications. nano-fifos still used in 'frag' logic... whatever that is. wireless/bluetooth: Fix numerous typos introduced by an ill conceived search-and-replace. wireless/bluetooth: Add message queue support to manage interthread buffer transfers. wireless/bluetooth: Replace fibers with kernel threads. wireless/bluetooth: Fix a few initial compile errors. Just the tip of the iceberg. wireless/bluetooth: Complete leveage of the bluetooth stack including public header files. wireless/bluetooth: Complete leverage of all Bluetooth source files. Still missing header files that defines the driver interface. Also missing the network driver implementation. wireless/bluetooth: Fix some naming of static global variables. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package (plus two original files). wireless/bluetooth: Adds five more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: First few files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
2018-03-30 02:35:41 +08:00
uint16_t cid;
CODE void (*connected)(FAR struct bt_conn_s *conn,
FAR void *context, uint16_t cid);
CODE void (*disconnected)(FAR struct bt_conn_s *conn, FAR void *context,
uint16_t cid);
CODE void (*encrypt_change)(FAR struct bt_conn_s *conn,
FAR void *context, uint16_t cid);
CODE void (*receive)(FAR struct bt_conn_s *conn, FAR struct bt_buf_s *buf,
FAR void *context, uint16_t cid);
This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package. NOTE: This selection is marked EXPERIMENTAL. It is incomplete and, hence, untested. It still lacks any low-level Bluetooth drivers and is missing the network interface driver. Squashed commit of the following: wireless/bluetooth: Fixe last of compile issues. Now compiles without errors or warnings. wireless/blutooth: Add macros BT_GETUINT16() and BT_PUTUINT16(). Fix more compile errors. Only one file now generates compile errors. wireless/bluetooth: Add macros BT_LE162HOST() and BT_HOST2LE16(). wireless/bluetooth: Add bt_queue.c; begin fixing comple errors. Many more compile problems yet to resolve. Kconfig edited online with Bitbucket wireless/bluetooth: Struggling to remove nano_fifo logic: Replace buffer management with IOB allocate... this changes some logic and might have some side effects. Use messages queues instead of nano-fifos to inter-task communications. nano-fifos still used in 'frag' logic... whatever that is. wireless/bluetooth: Fix numerous typos introduced by an ill conceived search-and-replace. wireless/bluetooth: Add message queue support to manage interthread buffer transfers. wireless/bluetooth: Replace fibers with kernel threads. wireless/bluetooth: Fix a few initial compile errors. Just the tip of the iceberg. wireless/bluetooth: Complete leveage of the bluetooth stack including public header files. wireless/bluetooth: Complete leverage of all Bluetooth source files. Still missing header files that defines the driver interface. Also missing the network driver implementation. wireless/bluetooth: Fix some naming of static global variables. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package (plus two original files). wireless/bluetooth: Adds five more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: First few files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
2018-03-30 02:35:41 +08:00
};
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/* Register a fixed L2CAP channel handler for L2CAP */
This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package. NOTE: This selection is marked EXPERIMENTAL. It is incomplete and, hence, untested. It still lacks any low-level Bluetooth drivers and is missing the network interface driver. Squashed commit of the following: wireless/bluetooth: Fixe last of compile issues. Now compiles without errors or warnings. wireless/blutooth: Add macros BT_GETUINT16() and BT_PUTUINT16(). Fix more compile errors. Only one file now generates compile errors. wireless/bluetooth: Add macros BT_LE162HOST() and BT_HOST2LE16(). wireless/bluetooth: Add bt_queue.c; begin fixing comple errors. Many more compile problems yet to resolve. Kconfig edited online with Bitbucket wireless/bluetooth: Struggling to remove nano_fifo logic: Replace buffer management with IOB allocate... this changes some logic and might have some side effects. Use messages queues instead of nano-fifos to inter-task communications. nano-fifos still used in 'frag' logic... whatever that is. wireless/bluetooth: Fix numerous typos introduced by an ill conceived search-and-replace. wireless/bluetooth: Add message queue support to manage interthread buffer transfers. wireless/bluetooth: Replace fibers with kernel threads. wireless/bluetooth: Fix a few initial compile errors. Just the tip of the iceberg. wireless/bluetooth: Complete leveage of the bluetooth stack including public header files. wireless/bluetooth: Complete leverage of all Bluetooth source files. Still missing header files that defines the driver interface. Also missing the network driver implementation. wireless/bluetooth: Fix some naming of static global variables. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package (plus two original files). wireless/bluetooth: Adds five more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: First few files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
2018-03-30 02:35:41 +08:00
void bt_l2cap_chan_register(FAR struct bt_l2cap_chan_s *chan);
/* Register a default L2CAP channel handle for L2CAP */
void bt_l2cap_chan_default(FAR struct bt_l2cap_chan_s *chan);
This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package. NOTE: This selection is marked EXPERIMENTAL. It is incomplete and, hence, untested. It still lacks any low-level Bluetooth drivers and is missing the network interface driver. Squashed commit of the following: wireless/bluetooth: Fixe last of compile issues. Now compiles without errors or warnings. wireless/blutooth: Add macros BT_GETUINT16() and BT_PUTUINT16(). Fix more compile errors. Only one file now generates compile errors. wireless/bluetooth: Add macros BT_LE162HOST() and BT_HOST2LE16(). wireless/bluetooth: Add bt_queue.c; begin fixing comple errors. Many more compile problems yet to resolve. Kconfig edited online with Bitbucket wireless/bluetooth: Struggling to remove nano_fifo logic: Replace buffer management with IOB allocate... this changes some logic and might have some side effects. Use messages queues instead of nano-fifos to inter-task communications. nano-fifos still used in 'frag' logic... whatever that is. wireless/bluetooth: Fix numerous typos introduced by an ill conceived search-and-replace. wireless/bluetooth: Add message queue support to manage interthread buffer transfers. wireless/bluetooth: Replace fibers with kernel threads. wireless/bluetooth: Fix a few initial compile errors. Just the tip of the iceberg. wireless/bluetooth: Complete leveage of the bluetooth stack including public header files. wireless/bluetooth: Complete leverage of all Bluetooth source files. Still missing header files that defines the driver interface. Also missing the network driver implementation. wireless/bluetooth: Fix some naming of static global variables. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package (plus two original files). wireless/bluetooth: Adds five more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: First few files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
2018-03-30 02:35:41 +08:00
/* Notify L2CAP channels of a new connection */
void bt_l2cap_connected(FAR struct bt_conn_s *conn);
/* Notify L2CAP channels of a disconnect event */
void bt_l2cap_disconnected(FAR struct bt_conn_s *conn);
/* Notify L2CAP channels of a change in encryption state */
void bt_l2cap_encrypt_change(FAR struct bt_conn_s *conn);
/* Prepare an L2CAP PDU to be sent over a connection */
FAR struct bt_buf_s *bt_l2cap_create_pdu(FAR struct bt_conn_s *conn);
/* Send L2CAP PDU over a connection */
void bt_l2cap_send(FAR struct bt_conn_s *conn, uint16_t cid,
FAR struct bt_buf_s *buf);
/* Receive a new L2CAP PDU from a connection */
void bt_l2cap_receive(FAR struct bt_conn_s *conn, FAR struct bt_buf_s *buf);
This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package. NOTE: This selection is marked EXPERIMENTAL. It is incomplete and, hence, untested. It still lacks any low-level Bluetooth drivers and is missing the network interface driver. Squashed commit of the following: wireless/bluetooth: Fixe last of compile issues. Now compiles without errors or warnings. wireless/blutooth: Add macros BT_GETUINT16() and BT_PUTUINT16(). Fix more compile errors. Only one file now generates compile errors. wireless/bluetooth: Add macros BT_LE162HOST() and BT_HOST2LE16(). wireless/bluetooth: Add bt_queue.c; begin fixing comple errors. Many more compile problems yet to resolve. Kconfig edited online with Bitbucket wireless/bluetooth: Struggling to remove nano_fifo logic: Replace buffer management with IOB allocate... this changes some logic and might have some side effects. Use messages queues instead of nano-fifos to inter-task communications. nano-fifos still used in 'frag' logic... whatever that is. wireless/bluetooth: Fix numerous typos introduced by an ill conceived search-and-replace. wireless/bluetooth: Add message queue support to manage interthread buffer transfers. wireless/bluetooth: Replace fibers with kernel threads. wireless/bluetooth: Fix a few initial compile errors. Just the tip of the iceberg. wireless/bluetooth: Complete leveage of the bluetooth stack including public header files. wireless/bluetooth: Complete leverage of all Bluetooth source files. Still missing header files that defines the driver interface. Also missing the network driver implementation. wireless/bluetooth: Fix some naming of static global variables. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package (plus two original files). wireless/bluetooth: Adds five more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: Adds three more files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. wireless/bluetooth: First few files ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
2018-03-30 02:35:41 +08:00
/* Perform connection parameter update request */
void bt_l2cap_update_conn_param(FAR struct bt_conn_s *conn);
/* Initialize L2CAP and supported channels */
int bt_l2cap_init(void);
#endif /* __WIRELESS_BLUETOOTH_BT_L2CAP_H */