OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity
incubator-nuttx/drivers/note/CMakeLists.txt

53 lines
1.6 KiB
CMake
Raw Normal View History

build: add initial cmake build system 1. Update all CMakeLists.txt to adapt to new layout 2. Fix cmake build break 3. Update all new file license 4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose) ------------------ How to test From within nuttx/. Configure: cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja (or full path in custom board) : cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja This uses ninja generator (install with sudo apt install ninja-build). To build: $ cmake --build build menuconfig: $ cmake --build build -t menuconfig -------------------------- 2. cmake/build: reformat the cmake style by cmake-format https://github.com/cheshirekow/cmake_format $ pip install cmakelang $ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done $ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done Co-authored-by: Matias N <matias@protobits.dev> Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-07 14:15:30 +08:00
# ##############################################################################
# drivers/note/CMakeLists.txt
#
# Licensed to the Apache Software Foundation (ASF) under one or more contributor
# license agreements. See the NOTICE file distributed with this work for
# additional information regarding copyright ownership. The ASF licenses this
# file to you under the Apache License, Version 2.0 (the "License"); you may not
# use this file except in compliance with the License. You may obtain a copy of
# the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations under
# the License.
#
# ##############################################################################
set(SRCS)
cmake: fix CMake build break Signed-off-by: chao an <anchao@xiaomi.com>
2023-07-13 16:31:02 +08:00
if(CONFIG_DRIVERS_NOTE)
build: add initial cmake build system 1. Update all CMakeLists.txt to adapt to new layout 2. Fix cmake build break 3. Update all new file license 4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose) ------------------ How to test From within nuttx/. Configure: cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja (or full path in custom board) : cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja This uses ninja generator (install with sudo apt install ninja-build). To build: $ cmake --build build menuconfig: $ cmake --build build -t menuconfig -------------------------- 2. cmake/build: reformat the cmake style by cmake-format https://github.com/cheshirekow/cmake_format $ pip install cmakelang $ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done $ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done Co-authored-by: Matias N <matias@protobits.dev> Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-07 14:15:30 +08:00
list(APPEND SRCS note_driver.c)
cmake: fix CMake build break Signed-off-by: chao an <anchao@xiaomi.com>
2023-07-13 16:31:02 +08:00
list(APPEND SRCS note_initialize.c)
build: add initial cmake build system 1. Update all CMakeLists.txt to adapt to new layout 2. Fix cmake build break 3. Update all new file license 4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose) ------------------ How to test From within nuttx/. Configure: cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja (or full path in custom board) : cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja This uses ninja generator (install with sudo apt install ninja-build). To build: $ cmake --build build menuconfig: $ cmake --build build -t menuconfig -------------------------- 2. cmake/build: reformat the cmake style by cmake-format https://github.com/cheshirekow/cmake_format $ pip install cmakelang $ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done $ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done Co-authored-by: Matias N <matias@protobits.dev> Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-07 14:15:30 +08:00
endif()
cmake: fix CMake build break Signed-off-by: chao an <anchao@xiaomi.com>
2023-07-13 16:31:02 +08:00
if(CONFIG_DRIVERS_NOTERAM)
build: add initial cmake build system 1. Update all CMakeLists.txt to adapt to new layout 2. Fix cmake build break 3. Update all new file license 4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose) ------------------ How to test From within nuttx/. Configure: cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja (or full path in custom board) : cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja This uses ninja generator (install with sudo apt install ninja-build). To build: $ cmake --build build menuconfig: $ cmake --build build -t menuconfig -------------------------- 2. cmake/build: reformat the cmake style by cmake-format https://github.com/cheshirekow/cmake_format $ pip install cmakelang $ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done $ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done Co-authored-by: Matias N <matias@protobits.dev> Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-07 14:15:30 +08:00
list(APPEND SRCS noteram_driver.c)
endif()
cmake: fix CMake build break Signed-off-by: chao an <anchao@xiaomi.com>
2023-07-13 16:31:02 +08:00
if(CONFIG_DRIVERS_NOTELOG)
list(APPEND SRCS notelog_driver.c)
endif()
if(CONFIG_DRIVERS_NOTECTL)
build: add initial cmake build system 1. Update all CMakeLists.txt to adapt to new layout 2. Fix cmake build break 3. Update all new file license 4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose) ------------------ How to test From within nuttx/. Configure: cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja (or full path in custom board) : cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja This uses ninja generator (install with sudo apt install ninja-build). To build: $ cmake --build build menuconfig: $ cmake --build build -t menuconfig -------------------------- 2. cmake/build: reformat the cmake style by cmake-format https://github.com/cheshirekow/cmake_format $ pip install cmakelang $ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done $ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done Co-authored-by: Matias N <matias@protobits.dev> Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-07 14:15:30 +08:00
list(APPEND SRCS notectl_driver.c)
endif()
cmake: fix CMake build break Signed-off-by: chao an <anchao@xiaomi.com>
2023-07-13 16:31:02 +08:00
if(CONFIG_DRIVERS_NOTESNAP)
list(APPEND SRCS notesnap_driver.c)
endif()
drivers/note: suport rpmsg transfer channel for note,some note api need to adapte for rpmsg. We can transfer note content through rpmsg Signed-off-by: zhangwenjian <zhangwenjian@xiaomi.com>
2024-01-30 18:57:36 +08:00
if(CONFIG_DRIVERS_NOTERPMSG_SERVER)
list(APPEND SRCS noterpmsg_server.c)
endif()
if(CONFIG_DRIVERS_NOTERPMSG)
list(APPEND SRCS noterpmsg_driver.c)
endif()
build: add initial cmake build system 1. Update all CMakeLists.txt to adapt to new layout 2. Fix cmake build break 3. Update all new file license 4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose) ------------------ How to test From within nuttx/. Configure: cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja (or full path in custom board) : cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja This uses ninja generator (install with sudo apt install ninja-build). To build: $ cmake --build build menuconfig: $ cmake --build build -t menuconfig -------------------------- 2. cmake/build: reformat the cmake style by cmake-format https://github.com/cheshirekow/cmake_format $ pip install cmakelang $ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done $ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done Co-authored-by: Matias N <matias@protobits.dev> Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-07 14:15:30 +08:00
target_sources(drivers PRIVATE ${SRCS})
cmake: fix CMake build break Signed-off-by: chao an <anchao@xiaomi.com>
2023-07-13 16:31:02 +08:00
target_include_directories(drivers PRIVATE ${NUTTX_DIR}/sched)