incubator-nuttx/tools/simwifi/hostapd_hwsim.conf

ctrl_interface=/var/run/simwifi/hostapd
driver=nl80211
ssid=Hwsim_WiFi
hw_mode=g
channel=8
wmm_enabled=0
macaddr_acl=0
auth_algs=1
ignore_broadcast_ssid=0
wpa=2
wpa_passphrase=12345678
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
wifi/simdriver: Support the sim wifi. Add the Sim WiFi function, which can provide the wifi operating on nuttx sim emulator, and support two modes that simulate wifi, HWSIM and RNC(real network card). - In the HWSIM mode, we simulates two wlan interfaces. The wlan0 is STA and the wlan1 is AP. The wlan0 can connect to the wlan1 in the nuttx simulator. - In the RNC mode, we can use the same wlan interface name on the nuttx simulator to control the connection behavior of the real wireless card. Signed-off-by: liqinhui <liqinhui@xiaomi.com> 2023-06-26 19:18:32 +08:00			`ctrl_interface=/var/run/simwifi/hostapd`
			`driver=nl80211`
			`ssid=Hwsim_WiFi`
			`hw_mode=g`
			`channel=8`
			`wmm_enabled=0`
			`macaddr_acl=0`
			`auth_algs=1`
			`ignore_broadcast_ssid=0`
			`wpa=2`
			`wpa_passphrase=12345678`
			`wpa_key_mgmt=WPA-PSK`
			`wpa_pairwise=TKIP`
			`rsn_pairwise=CCMP`