incubator-nuttx/configs/kwikstik-k40/ostest/ld.script

/****************************************************************************
 * configs/kwikstik-k40/ostest/ld.script
 *
 *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/* The K40X256VLQ100 has 256Kb of FLASH beginning at address 0x0000:0000 and
 * 64Kb of SRAM beginning at address 0x1800:0000 (SRAM_L) and 0x2000:000
 * (SRAM_U).
 *
 * NOTE: that the first part of the K40 FLASH region is reserved for
 *       interrupt vectflash and, following that, is a region from 0x0000:0400
 *       to 0x0000:040f that is reserved for the FLASH control fields (FCF).
 *
 * NOTE: The on-chip RAM is split evenly among SRAM_L and SRAM_U. The RAM is
 *       also implemented such that the SRAM_L and SRAM_U ranges form a
 *       contiguous block in the memory map.
 */

MEMORY
{
	vectflash (rx)  : ORIGIN = 0x00000000, LENGTH = 1K - 16
	cfmprotect (rx) : ORIGIN = 0x00000400, LENGTH = 16
	progflash (rx)  : ORIGIN = 0x00000800, LENGTH = 256K - 2K
	datasram (rwx)  : ORIGIN = 0x1fff8000, LENGTH = 64K
}

OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
	.vectors : {
		_svectors = ABSOLUTE(.);
		*(.vectors)
		_evectors = ABSOLUTE(.);
	} > vectflash

	.cfmprotect : {
		*(.cfmconfig)
	} > cfmprotect

	.text : {
		_stext = ABSOLUTE(.);
		*(.text .text.*)        
		*(.fixup)
		*(.gnu.warning)
		*(.rodata .rodata.*)        
		*(.gnu.linkonce.t.*)
		*(.glue_7)
		*(.glue_7t)
		*(.got)
		*(.gcc_except_table)
		*(.gnu.linkonce.r.*)
		_etext = ABSOLUTE(.);
	} > progflash

	.data : {
		_sdata = ABSOLUTE(.);
		*(.data .data.*)
		*(.gnu.linkonce.d.*)
		CONSTRUCTORS
		_edata = ABSOLUTE(.);
	} > datasram AT > progflash

	_eronly = LOADADDR(.data);

	.ramfunc ALIGN(4): {
		_sramfuncs = ABSOLUTE(.);
		*(.ramfunc  .ramfunc.*)
		_eramfuncs = ABSOLUTE(.);
	} > datasram AT > progflash

	_framfuncs = LOADADDR(.ramfunc);

	.ARM.extab : {
		*(.ARM.extab*)
	} > datasram

	__exidx_start = ABSOLUTE(.);
	.ARM.exidx : {
		*(.ARM.exidx*)
	} > datasram
	__exidx_end = ABSOLUTE(.);

	.bss : {
		_sbss = ABSOLUTE(.);
		*(.bss .bss.*)
		*(.gnu.linkonce.b.*)
		*(COMMON)
		_ebss = ABSOLUTE(.);
	} > datasram

	/* Stabs debugging sections. */
	.stab 0 : { *(.stab) }
	.stabstr 0 : { *(.stabstr) }
	.stab.excl 0 : { *(.stab.excl) }
	.stab.exclstr 0 : { *(.stab.exclstr) }
	.stab.index 0 : { *(.stab.index) }
	.stab.indexstr 0 : { *(.stab.indexstr) }
	.comment 0 : { *(.comment) }
	.debug_abbrev 0 : { *(.debug_abbrev) }
	.debug_info 0 : { *(.debug_info) }
	.debug_line 0 : { *(.debug_line) }
	.debug_pubnames 0 : { *(.debug_pubnames) }
	.debug_aranges 0 : { *(.debug_aranges) }
}