incubator-nuttx/boards/arm/s32k1xx/rddrone-uavcan144/README.txt

README
======

This directory holds the port to the NXP RDDRONE-UAVCAN board with S32K144 MCU.

Contents
========

  o Status

Status
======

  2020-01-23:  Configuration created (copy-paste from S32K146EVB).
    Tested: Serial console, I2C, SPI
S32K add support for Nxp drone boards (#224) * S32K add support for Nxp drone boards * Update arch/arm/src/s32k1xx/hardware/s32k1xx_rtc.h codestyle Co-Authored-By: David Sidrane <David.Sidrane@Nscdg.com> Co-authored-by: Jari van Ewijk <jari.vanewijk@nxp.com> Co-authored-by: David Sidrane <David.Sidrane@Nscdg.com> 2020-02-07 20:53:40 +08:00			`README`
			`======`

			`This directory holds the port to the NXP RDDRONE-UAVCAN board with S32K144 MCU.`

			`Contents`
			`========`

			`o Status`

			`Status`
			`======`

			`2020-01-23: Configuration created (copy-paste from S32K146EVB).`
Ensure all source code end with one and only one newline by this command: git ls-files -z \| while IFS= read -rd '' f; do tail -c1 < "$f" \| read -r _ \|\| echo >> "$f"; done 2020-02-07 21:17:25 +08:00			`Tested: Serial console, I2C, SPI`