incubator-nuttx/drivers/net/Make.defs

91 lines
2.6 KiB
Plaintext
Raw Normal View History

############################################################################
# drivers/net/Make.defs
#
# Copyright (C) 2007, 2010-2012, 2015 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
# Include nothing if networking is disabled
ifeq ($(CONFIG_NET),y)
# Include network interface drivers
ifeq ($(CONFIG_NET_LOOPBACK),y)
CSRCS += loopback.c
endif
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-03 01:30:33 +08:00
ifeq ($(CONFIG_NET_RPMSG_DRV),y)
CSRCS += rpmsgdrv.c
endif
ifeq ($(CONFIG_NETDEV_TELNET),y)
CSRCS += telnet.c
endif
ifeq ($(CONFIG_NET_DM90x0),y)
CSRCS += dm90x0.c
endif
ifeq ($(CONFIG_ENC28J60),y)
CSRCS += enc28j60.c
endif
ifeq ($(CONFIG_ENCX24J600),y)
CSRCS += encx24j600.c
endif
ifeq ($(CONFIG_NET_SLIP),y)
CSRCS += slip.c
endif
2015-03-11 20:52:56 +08:00
ifeq ($(CONFIG_NET_TUN),y)
CSRCS += tun.c
endif
ifeq ($(CONFIG_NET_FTMAC100),y)
CSRCS += ftmac100.c
endif
ifeq ($(CONFIG_NET_LAN91C111),y)
CSRCS += lan91c111.c
endif
ifeq ($(CONFIG_ARCH_PHY_INTERRUPT),y)
CSRCS += phy_notify.c
endif
# Include network build support
DEPPATH += --dep-path net
VPATH += :net
endif