OrgApache/incubator-nuttx
OrgApache
/
incubator-nuttx
mirror of https://github.com/apache/incubator-nuttx.git
1
0
Fork 0
Code Issues Releases Wiki Activity
incubator-nuttx/net/icmpv6/Kconfig

294 lines
8.4 KiB
Plaintext
Raw Normal View History

Networking: Make a home for ICMPv6
2015-01-15 04:26:50 +08:00
#
# For a description of the syntax of this configuration file,
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 22:08:57 +08:00
# see the file kconfig-language.txt in the NuttX tools repository.
Networking: Make a home for ICMPv6
2015-01-15 04:26:50 +08:00
#
menu "ICMPv6 Networking Support"
config NET_ICMPv6
bool "Enable ICMPv6 networking"
default n
netdev/ipv6: Move `xxx_ipv6multicast` from arch to common code The `xxx_ipv6multicast` function in each driver is not adapted to multiple IPv6 addresses yet, and they're redundant, so try to take them into common code. Change: 1. Add MAC `g_ipv6_ethallnodes` and `g_ipv6_ethallrouters` in `icmpv6_devinit` and call them in `netdev_register` 2. Add multicast MAC for Neighbor Solicitation when adding any IPv6 address, and remove them when IPv6 address is removed 3. Select `NET_MCASTGROUP` when `NET_ICMPv6` because now we need `d_addmac` when we have ICMPv6 Note: We want modules outside net stack to call functions like `netdev_ipv6_add` and never touch the related MAC address, so these MAC functions are added as internal functions to `net/netdev/netdev.h` Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2023-12-13 12:39:43 +08:00
select NET_MCASTGROUP
Networking: Make a home for ICMPv6
2015-01-15 04:26:50 +08:00
depends on NET
---help---
Enable minimal ICMPv6 support. Includes built-in support
for sending replies to received ECHO (ping) requests.
net/: add NET_ICMP[v6]_NO_STACK for usrsock case
2018-11-10 01:25:57 +08:00
config NET_ICMPv6_NO_STACK
bool "Disable ICMPv6 stack"
default n
select NET_ICMPv6
---help---
Build without ICMPv6 stack even if ICMPv6 networking support enabled.
if NET_ICMPv6 && !NET_ICMPv6_NO_STACK
Networking: Make a home for ICMPv6
2015-01-15 04:26:50 +08:00
nuttx/net:Support to PMTUD RFC 1191 When a router is unable to forward a datagram because it exceeds the MTU of the next-hop network and its Don't Fragment bit is set, the router is required to return an ICMP Destination Unreachable message to the source of the datagram, with the Code indicating "fragmentation needed and DF set". To support the Path MTU Discovery technique specified in this memo, the router MUST include the MTU of that next-hop network in the low-order 16 bits of the ICMP header field that is labelled "unused" in the ICMP specification [7]. The high-order 16 bits remain unused, and MUST be set to zero. Thus, the message has the following format: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type = 3 | Code = 4 | Checksum | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | unused = 0 | Next-Hop MTU | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Internet Header + 64 bits of Original Datagram Data | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ RFC 1185 Packet Too Big Message 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type | Code | Checksum | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | MTU | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | As much of invoking packet | + as will fit without the ICMPv6 packet + | exceeding 576 octets | IPv6 Fields: Destination Address Copied from the Source Address field of the invoking packet. ICMPv6 Fields: Type 2 Code 0 MTU The Maximum Transmission Unit of the next-hop link. Description A Packet Too Big MUST be sent by a router in response to a packet that it cannot forward because the packet is larger than the MTU of the outgoing link. The information in this message is used as part of the Path MTU Discovery process [RFC-1191]. Signed-off-by: wangchen <wangchen41@xiaomi.com>
2023-05-11 19:32:30 +08:00
config NET_ICMPv6_PMTU_ENTRIES
int "PMTUD ICMPv6 pmtu entry"
default 0
---help---
The number of the ICMPv6 pmtu entry
config NET_ICMPv6_PMTU_TIMEOUT
int "PMTUD ICMPv6 pmtu entry timeout (Time Unit:minute)"
default 10
depends on NET_ICMPv6_PMTU_ENTRIES != 0
---help---
The timout of the ICMPv6 pmtu entry
This commit adds support for semi-standard IPPROTO_ICMP6 sockets. This is a replacement for the non-standard ICMPv6 ping support that violated the portable POSIX OS interface. Squashed commit of the following: net/icmpv6: IPPROT_ICMP6 socket logic now builds without error. net/icmpv6: Add support for read-ahead and poll(). Initial commit is just cloned from ICMP with the appropriate name changes. configs/: All defconfig filess that include CONFIG_NET_ICMPv6_SOCKET=y need to select CONFIG_SYSTEM_PING6=y and deselect CONFIG_DISABLE_POLL. Update NSH documention to show that ping6 is now a built in command. net/icmpv6: Add icmpv6_sendto.c and icmpv6_recvfrom.c. Initial versions are just clones from icmp/ with appropriate name changes. net/icmpv6: Clone some ICMP socket logic as the beginning of support for ICMPv6 socket support. Rename CONFIG_NET_ICMPv6_PING to CONFIG_NET_ICMPv6_SOCKET. Move prototype for icmpv6_ping from include/nuttx/net/icmpv6 to net/icmpv6/icmpv6.h
2017-10-25 01:23:08 +08:00
config NET_ICMPv6_SOCKET
bool "IPPROTO_ICMP6 socket support"
Networking: Update ICMPv6 logic to RFCs
2015-01-21 01:06:51 +08:00
default n
Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> Run all .h and .c files modified in last PR through nxstyle. Author: Xiang Xiao <xiaoxiang@xiaomi.com> Net cleanup (#17) * Fix the semaphore usage issue found in tcp/udp 1. The count semaphore need disable priority inheritance 2. Loop again if net_lockedwait return -EINTR 3. Call nxsem_trywait to avoid the race condition 4. Call nxsem_post instead of sem_post * Put the work notifier into free list to avoid the heap fragment in the long run. Since the allocation strategy is encapsulated internally, we can even refine the implementation later. * Network stack shouldn't allocate memory in the poll implementation to avoid the heap fragment in the long run, other modification include: 1. Select MM_IOB automatically since ICMP[v6] socket can't work without the read ahead buffer 2. Remove the net lock since xxx_callback_free already do the same thing 3. TCP/UDP poll should work even the read ahead buffer isn't enabled at all * Add NET_ prefix for UDP_NOTIFIER and TCP_NOTIFIER option to align with other UDP/TCP option convention * Remove the unused _SF_[IDLE|ACCEPT|SEND|RECV|MASK] flags since there are code to set/clear these flags, but nobody check them.
2019-12-31 23:26:14 +08:00
select MM_IOB
Networking: Update ICMPv6 logic to RFCs
2015-01-21 01:06:51 +08:00
---help---
This commit adds support for semi-standard IPPROTO_ICMP6 sockets. This is a replacement for the non-standard ICMPv6 ping support that violated the portable POSIX OS interface. Squashed commit of the following: net/icmpv6: IPPROT_ICMP6 socket logic now builds without error. net/icmpv6: Add support for read-ahead and poll(). Initial commit is just cloned from ICMP with the appropriate name changes. configs/: All defconfig filess that include CONFIG_NET_ICMPv6_SOCKET=y need to select CONFIG_SYSTEM_PING6=y and deselect CONFIG_DISABLE_POLL. Update NSH documention to show that ping6 is now a built in command. net/icmpv6: Add icmpv6_sendto.c and icmpv6_recvfrom.c. Initial versions are just clones from icmp/ with appropriate name changes. net/icmpv6: Clone some ICMP socket logic as the beginning of support for ICMPv6 socket support. Rename CONFIG_NET_ICMPv6_PING to CONFIG_NET_ICMPv6_SOCKET. Move prototype for icmpv6_ping from include/nuttx/net/icmpv6 to net/icmpv6/icmpv6.h
2017-10-25 01:23:08 +08:00
Enable support for IPPROTO_ICMP6 sockets. These sockets are needed
for application level support for sending ICMPv7 ECHO requests and
receiving associated ICMPv6 ECHO replies.
Remove CONFIG_NET_PINGADDRCONF. This was a uIP way of assigning IP addresses, but is not standard and not a appropriate feature in general.
2015-12-01 21:48:56 +08:00
modify for offload checksum and add macro with tcp/icmp/icmpv6/igmp checksum Signed-off-by: daichuan <daichuan@xiaomi.com>
2024-04-24 11:06:52 +08:00
config NET_ICMPv6_CHECKSUMS
bool "ICMPv6 checksums"
default y
---help---
Enable/disable ICMPv6 checksum support.
IPv6: Remove an unusd file (kruft from original IPv6 develoment); Add inital hooks to support automatic Neighbor Solitication
2015-02-03 00:49:50 +08:00
config NET_ICMPv6_NEIGHBOR
bool "Solicit destination addresses"
default n
---help---
Enable logic to send ICMPv6 neighbor solicitation requests if
the target IPv6 address mapping does not appear in the Neighbor
table.
IPv6: More framework for automatic neighbor solicition. I think this also corrects and error in a broadcast/multicast address chedk
2015-02-03 01:34:51 +08:00
if NET_ICMPv6_NEIGHBOR
config ICMPv6_NEIGHBOR_MAXTRIES
Networking: Add support for sending ICMPv6 Router Solicitation and receiving Router advertisement. This is a part of the ICMPv6 auto-configuration logic is still still not complete
2015-02-04 03:25:28 +08:00
int "ICMPv6 neighbor solicitation retries"
IPv6: More framework for automatic neighbor solicition. I think this also corrects and error in a broadcast/multicast address chedk
2015-02-03 01:34:51 +08:00
default 5
---help---
Send the Neighbor solicitation this number of times before giving
up and deciding that the target IP6 address is non reachable.
config ICMPv6_NEIGHBOR_DELAYMSEC
Networking: Add support for sending ICMPv6 Router Solicitation and receiving Router advertisement. This is a part of the ICMPv6 auto-configuration logic is still still not complete
2015-02-04 03:25:28 +08:00
int "ICMPv6 neighbor re-solicit delay"
Restore 20Msec default
2015-02-03 04:59:49 +08:00
default 20
IPv6: More framework for automatic neighbor solicition. I think this also corrects and error in a broadcast/multicast address chedk
2015-02-03 01:34:51 +08:00
---help---
Wait this number of milliseconds after sending the Neighbor
Solicitation before checking if the IPv6 address mapping is present
in the Neighbor Table. This time should be related to the maximum
round trip time on the network since it is basically the time from
when an Neighbor Solicitation is sent until the Neighbor
Advertisement is received.
endif # NET_ICMPv6_NEIGHBOR
ICMPv6: Add file/build structure that will eventually support ICMPv6 auto-configuration
2015-02-03 07:54:48 +08:00
config NET_ICMPv6_AUTOCONF
Add netlib and application hooks for ICMPv6 auto-configuration (still incomplete
2015-02-03 22:01:55 +08:00
bool "ICMPv6 auto-configuration"
ICMPv6: Add file/build structure that will eventually support ICMPv6 auto-configuration
2015-02-03 07:54:48 +08:00
default n
---help---
Enable ioctl() logic that implements ICMPv6 auto configuration.
ICMPv6 auto configuration is an alternative to DHCPv6 for obtaining
an IPv6 address from a router.
Networking: Add support for sending ICMPv6 Router Solicitation and receiving Router advertisement. This is a part of the ICMPv6 auto-configuration logic is still still not complete
2015-02-04 03:25:28 +08:00
if NET_ICMPv6_AUTOCONF
config ICMPv6_AUTOCONF_MAXTRIES
int "ICMPv6 router solicitation retries"
default 5
---help---
Send the Router solicitation this number of times before giving
up and deciding that no router is going to provide an IP address.
config ICMPv6_AUTOCONF_DELAYMSEC
int "ICMPv6 router re-solicit delay"
default 20
---help---
Wait this number of milliseconds before re-sending the Router
Solicitation. This time should be related to the maximum
round trip time on the network since it is basically the time from
when an Router Solicitation is sent until the Router
Advertisement is received.
icmpv6: add route advertise RDNSS field handle when icmpv6_input Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
2023-03-15 13:52:18 +08:00
config ICMPv6_AUTOCONF_RDNSS
bool "ICMPv6 handle RDNSS field in router advertise"
default n
---help---
Handle the RDNSS field in the Router Advertisement and add it to
netdb DNS Server.
Networking: Add support for sending ICMPv6 Router Solicitation and receiving Router advertisement. This is a part of the ICMPv6 auto-configuration logic is still still not complete
2015-02-04 03:25:28 +08:00
endif # NET_ICMPv6_AUTOCONF
ICMPv6: Add option to send Router Advertisement Messages.
2015-02-05 23:28:00 +08:00
config NET_ICMPv6_ROUTER
bool "Router Advertisement"
default n
---help---
In a router-less environment, NuttX can be configured to provide a
response to Router Solicitation messages and, hence, providing
addressing to IPv6 nodes on the network.
if NET_ICMPv6_ROUTER
Add CONFIG_NET_ICMPv6_ROUTER_LIFETIME Allows setting the advertised route lifetime, and also to set it to 0 for advertising only the prefix. From RFC4861: A router might want to send Router Advertisements without advertising itself as a default router. For instance, a router might advertise prefixes for stateless address autoconfiguration while not wishing to forward packets. Such a router sets the Router Lifetime field in outgoing advertisements to zero.
2023-09-26 16:35:36 +08:00
config NET_ICMPv6_ROUTER_LIFETIME
int "Router Advertisement router lifetime in seconds"
default 1800
---help---
Set the router lifetime for advertising as a default router.
Set to 0 to only advertise autoconfiguration prefix without
advertising as a router.
net/icmpv6/icmpv6_radvertise.c: Add option to manually specify router prefix
2017-11-08 21:47:41 +08:00
config NET_ICMPv6_ROUTER_MANUAL
bool "Manual router prefix"
default n
---help---
Select this to set the advertised router prefix manually. Otherwise, it
will be derived from the device IPv6 address and prefix length set in
the netdev structure.
if NET_ICMPv6_ROUTER_MANUAL
ICMPv6: Add option to send Router Advertisement Messages.
2015-02-05 23:28:00 +08:00
config NET_ICMPv6_PREFLEN
int "Prefix length"
default 64
range 0 128
---help---
The length (in bits) of the IPv6 address prefix. This is the number
of MS bits under the network mask. The default of 64 would
correspond to a network mask of:
0xffff:0xffff:0xffff:0xffff:0x0000:0x0000:0x0000:0x0000.
comment "Router Prefix"
config NET_ICMPv6_PREFIX_1
hex "[0]"
default 0xfc00
range 0x0 0xffff
---help---
This the IPv6 address prefix that will be provided in the IPv6 Router
Advertisement message. This is the first of the 8-values. The
default for all eight values is fc00::0.
config NET_ICMPv6_PREFIX_2
hex "[1]"
default 0x0000
range 0x0 0xffff
---help---
This the IPv6 address prefix that will be provided in the IPv6 Router
Advertisement message. This is the second of the 8-values. The
default for all eight values is fc00::0.
config NET_ICMPv6_PREFIX_3
hex "[2]"
default 0x0000
range 0x0 0xffff
---help---
This the IPv6 address prefix that will be provided in the IPv6 Router
Advertisement message. This is the third of the 8-values. The
default for all eight values is fc00::0.
config NET_ICMPv6_PREFIX_4
hex "[3]"
default 0x0000
range 0x0 0xffff
---help---
This the IPv6 address prefix that will be provided in the IPv6 Router
Advertisement message. This is the fourth of the 8-values. The
default for all eight values is fc00::0.
config NET_ICMPv6_PREFIX_5
hex "[4]"
default 0x0000
range 0x0 0xffff
---help---
This the IPv6 address prefix that will be provided in the IPv6 Router
Advertisement message. This is the fifth of the 8-values. The
default for all eight values is fc00::0.
config NET_ICMPv6_PREFIX_6
hex "[5]"
default 0x0000
range 0x0 0xffff
---help---
This the IPv6 address prefix that will be provided in the IPv6 Router
Advertisement message. This is the sixth of the 8-values. The
default for all eight values is fc00::0.
config NET_ICMPv6_PREFIX_7
hex "[6]"
default 0x0000
range 0x0 0xffff
---help---
This the IPv6 address prefix that will be provided in the IPv6 Router
Advertisement message. This is the seventh of the 8-values. The
default for all eight values is fc00::0.
config NET_ICMPv6_PREFIX_8
hex "[7]"
default 0x0000
range 0x0 0xffff
---help---
This the IPv6 address prefix that will be provided in the IPv6 Router
Advertisement message. This is the last of the 8-values. The
default for all eight values is fc00::0.
icmpv6: add RDNSS field support for send route advertise Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
2023-03-15 19:52:22 +08:00
config NET_ICMPv6_ROUTER_RDNSS
bool "Fill the RDNSS into Router Advertisement"
default n
---help---
Fill the RDNSS from the netdb DNS Server into the Router
Advertisement.
net/icmpv6/icmpv6_radvertise.c: Add option to manually specify router prefix
2017-11-08 21:47:41 +08:00
endif # NET_ICMPv6_ROUTER_MANUAL
ICMPv6: Add option to send Router Advertisement Messages.
2015-02-05 23:28:00 +08:00
endif # NET_ICMPv6_ROUTER
This commit adds support for semi-standard IPPROTO_ICMP6 sockets. This is a replacement for the non-standard ICMPv6 ping support that violated the portable POSIX OS interface. Squashed commit of the following: net/icmpv6: IPPROT_ICMP6 socket logic now builds without error. net/icmpv6: Add support for read-ahead and poll(). Initial commit is just cloned from ICMP with the appropriate name changes. configs/: All defconfig filess that include CONFIG_NET_ICMPv6_SOCKET=y need to select CONFIG_SYSTEM_PING6=y and deselect CONFIG_DISABLE_POLL. Update NSH documention to show that ping6 is now a built in command. net/icmpv6: Add icmpv6_sendto.c and icmpv6_recvfrom.c. Initial versions are just clones from icmp/ with appropriate name changes. net/icmpv6: Clone some ICMP socket logic as the beginning of support for ICMPv6 socket support. Rename CONFIG_NET_ICMPv6_PING to CONFIG_NET_ICMPv6_SOCKET. Move prototype for icmpv6_ping from include/nuttx/net/icmpv6 to net/icmpv6/icmpv6.h
2017-10-25 01:23:08 +08:00
if NET_ICMPv6_SOCKET
Improvements in ICMPv6 connections allocation.
2023-02-11 21:09:01 +08:00
config NET_ICMPv6_PREALLOC_CONNS
int "Preallocated ICMPv6 packet sockets"
This commit adds support for semi-standard IPPROTO_ICMP6 sockets. This is a replacement for the non-standard ICMPv6 ping support that violated the portable POSIX OS interface. Squashed commit of the following: net/icmpv6: IPPROT_ICMP6 socket logic now builds without error. net/icmpv6: Add support for read-ahead and poll(). Initial commit is just cloned from ICMP with the appropriate name changes. configs/: All defconfig filess that include CONFIG_NET_ICMPv6_SOCKET=y need to select CONFIG_SYSTEM_PING6=y and deselect CONFIG_DISABLE_POLL. Update NSH documention to show that ping6 is now a built in command. net/icmpv6: Add icmpv6_sendto.c and icmpv6_recvfrom.c. Initial versions are just clones from icmp/ with appropriate name changes. net/icmpv6: Clone some ICMP socket logic as the beginning of support for ICMPv6 socket support. Rename CONFIG_NET_ICMPv6_PING to CONFIG_NET_ICMPv6_SOCKET. Move prototype for icmpv6_ping from include/nuttx/net/icmpv6 to net/icmpv6/icmpv6.h
2017-10-25 01:23:08 +08:00
default 4
Improvements in ICMPv6 connections allocation.
2023-02-11 21:09:01 +08:00
---help---
Number of ICMPv6 connections (all tasks).
Remove the tail spaces from all files except Documentation Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-02-26 02:14:11 +08:00
Improvements in ICMPv6 connections allocation.
2023-02-11 21:09:01 +08:00
This number of connections will be pre-allocated during system boot.
If dynamic connections allocation is enabled, more connections may
be allocated at a later time, as the system needs them. Else this
will be the maximum number of connections available to the system
at all times.
Set to 0 to disable (and rely only on dynamic allocations).
config NET_ICMPv6_ALLOC_CONNS
int "Dynamic ICMPv6 connections allocation"
default 0
---help---
Dynamic memory allocations for ICMPv6.
When set to 0 all dynamic allocations are disabled.
When set to 1 a new connection will be allocated every time,
and it will be free'd when no longer needed.
Setting this to 2 or more will allocate the connections in
batches (with batch size equal to this config). When a
connection is no longer needed, it will be returned to the
free connections pool, and it will never be deallocated!
config NET_ICMPv6_MAX_CONNS
int "Maximum number of ICMPv6 connections"
default 0
depends on NET_ICMPv6_ALLOC_CONNS > 0
---help---
If dynamic connections allocation is selected (NET_ICMPv6_ALLOC_CONNS > 0)
this will limit the number of connections that can be allocated.
Remove the tail spaces from all files except Documentation Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-02-26 02:14:11 +08:00
Improvements in ICMPv6 connections allocation.
2023-02-11 21:09:01 +08:00
This is useful in case the system is under very heavy load (or
under attack), ensuring that the heap will not be exhausted.
Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> Run all .h and .c files modified in last PR through nxstyle. Author: Xiang Xiao <xiaoxiang@xiaomi.com> Net cleanup (#17) * Fix the semaphore usage issue found in tcp/udp 1. The count semaphore need disable priority inheritance 2. Loop again if net_lockedwait return -EINTR 3. Call nxsem_trywait to avoid the race condition 4. Call nxsem_post instead of sem_post * Put the work notifier into free list to avoid the heap fragment in the long run. Since the allocation strategy is encapsulated internally, we can even refine the implementation later. * Network stack shouldn't allocate memory in the poll implementation to avoid the heap fragment in the long run, other modification include: 1. Select MM_IOB automatically since ICMP[v6] socket can't work without the read ahead buffer 2. Remove the net lock since xxx_callback_free already do the same thing 3. TCP/UDP poll should work even the read ahead buffer isn't enabled at all * Add NET_ prefix for UDP_NOTIFIER and TCP_NOTIFIER option to align with other UDP/TCP option convention * Remove the unused _SF_[IDLE|ACCEPT|SEND|RECV|MASK] flags since there are code to set/clear these flags, but nobody check them.
2019-12-31 23:26:14 +08:00
config NET_ICMPv6_NPOLLWAITERS
int "Number of ICMPv6 poll waiters"
default 1
This commit adds support for semi-standard IPPROTO_ICMP6 sockets. This is a replacement for the non-standard ICMPv6 ping support that violated the portable POSIX OS interface. Squashed commit of the following: net/icmpv6: IPPROT_ICMP6 socket logic now builds without error. net/icmpv6: Add support for read-ahead and poll(). Initial commit is just cloned from ICMP with the appropriate name changes. configs/: All defconfig filess that include CONFIG_NET_ICMPv6_SOCKET=y need to select CONFIG_SYSTEM_PING6=y and deselect CONFIG_DISABLE_POLL. Update NSH documention to show that ping6 is now a built in command. net/icmpv6: Add icmpv6_sendto.c and icmpv6_recvfrom.c. Initial versions are just clones from icmp/ with appropriate name changes. net/icmpv6: Clone some ICMP socket logic as the beginning of support for ICMPv6 socket support. Rename CONFIG_NET_ICMPv6_PING to CONFIG_NET_ICMPv6_SOCKET. Move prototype for icmpv6_ping from include/nuttx/net/icmpv6 to net/icmpv6/icmpv6.h
2017-10-25 01:23:08 +08:00
endif # NET_ICMPv6_SOCKET
net/: add NET_ICMP[v6]_NO_STACK for usrsock case
2018-11-10 01:25:57 +08:00
endif # NET_ICMPv6 && !NET_ICMPv6_NO_STACK
Networking: Make a home for ICMPv6
2015-01-15 04:26:50 +08:00
endmenu # ICMPv6 Networking Support