2013-10-02 08:55:20 +08:00
|
|
|
/****************************************************************************
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 23:04:31 +08:00
|
|
|
* net/route/romroute.h
|
2013-10-02 08:55:20 +08:00
|
|
|
*
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 23:04:31 +08:00
|
|
|
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
|
2013-10-02 08:55:20 +08:00
|
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
*
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer in
|
|
|
|
|
* the documentation and/or other materials provided with the
|
|
|
|
|
* distribution.
|
|
|
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
|
|
|
* used to endorse or promote products derived from this software
|
|
|
|
|
* without specific prior written permission.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
|
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
|
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
|
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
|
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
|
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
|
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
|
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
|
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
|
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
|
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
|
*
|
|
|
|
|
****************************************************************************/
|
|
|
|
|
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 23:04:31 +08:00
|
|
|
#ifndef __NET_ROUTE_ROMROUTE_H
|
2020-02-01 02:07:39 +08:00
|
|
|
#define __NET_ROUTE_ROMROUTE_H
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 23:04:31 +08:00
|
|
|
|
2013-10-02 08:55:20 +08:00
|
|
|
/****************************************************************************
|
|
|
|
|
* Included Files
|
|
|
|
|
****************************************************************************/
|
|
|
|
|
|
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
|
|
2014-06-27 03:02:08 +08:00
|
|
|
#include "route/route.h"
|
2013-10-02 08:55:20 +08:00
|
|
|
|
2017-09-28 23:23:03 +08:00
|
|
|
#if defined(CONFIG_ROUTE_IPv4_ROMROUTE) || defined(CONFIG_ROUTE_IPv6_ROMROUTE)
|
|
|
|
|
|
2013-10-02 08:55:20 +08:00
|
|
|
/****************************************************************************
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 23:04:31 +08:00
|
|
|
* Public Data
|
2013-10-02 08:55:20 +08:00
|
|
|
****************************************************************************/
|
|
|
|
|
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 23:04:31 +08:00
|
|
|
/* These are the routing tables. These must be provided by board-specific
|
|
|
|
|
* logic.
|
|
|
|
|
*/
|
2013-10-02 08:55:20 +08:00
|
|
|
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 23:04:31 +08:00
|
|
|
#if defined(CONFIG_ROUTE_IPv4_ROMROUTE)
|
|
|
|
|
/* The in-memory routing tables are represented as a simple array. */
|
2013-10-02 08:55:20 +08:00
|
|
|
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 23:04:31 +08:00
|
|
|
extern struct net_route_ipv4_s g_ipv4_routes[];
|
|
|
|
|
extern const unsigned int g_ipv4_nroutes;
|
2015-05-13 21:22:02 +08:00
|
|
|
#endif
|
|
|
|
|
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 23:04:31 +08:00
|
|
|
#if defined(CONFIG_ROUTE_IPv6_ROMROUTE)
|
2017-09-28 23:23:03 +08:00
|
|
|
/* The in-memory routing tables are represented as a simple array. */
|
2015-05-13 21:22:02 +08:00
|
|
|
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 23:04:31 +08:00
|
|
|
extern struct net_route_ipv6_s g_ipv6_routes[];
|
|
|
|
|
extern const unsigned int g_ipv6_nroutes;
|
2015-05-13 21:22:02 +08:00
|
|
|
#endif
|
2013-10-02 08:55:20 +08:00
|
|
|
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 23:04:31 +08:00
|
|
|
/****************************************************************************
|
2017-09-29 22:33:36 +08:00
|
|
|
* Public Function Prototypes
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 23:04:31 +08:00
|
|
|
****************************************************************************/
|
|
|
|
|
|
2017-09-28 23:23:03 +08:00
|
|
|
#endif /* CONFIG_ROUTE_IPv4_ROMROUTE || CONFIG_ROUTE_IPv6_ROMROUTE */
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 23:04:31 +08:00
|
|
|
#endif /* __NET_ROUTE_ROMROUTE_H */
|