incubator-nuttx/tools/esp32/Config.mk

############################################################################
# tools/esp32/Config.mk
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.  The
# ASF licenses this file to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance with the
# License.  You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
# License for the specific language governing permissions and limitations
# under the License.
#
############################################################################

# These are the macros that will be used in the NuttX make system to compile
# and assemble source files and to insert the resulting object files into an
# archive.  These replace the default definitions at tools/Config.mk

# POSTBUILD -- Perform post build operations

ifdef BLOBDIR
	BOOTLOADER=${BLOBDIR}/esp32core/bootloader.bin
	PARTITION_TABLE=${BLOBDIR}/esp32core/partition-table.bin
else
	BOOTLOADER=$(IDF_PATH)/hello_world/build/bootloader/bootloader.bin
	PARTITION_TABLE=$(IDF_PATH)/hello_world/build/partition_table/partition-table.bin
endif

ifeq ($(CONFIG_ESP32_FLASH_2M),y)
	FLASH_SIZE="2MB"
else ifeq ($(CONFIG_ESP32_FLASH_4M),y)
	FLASH_SIZE="4MB"
else ifeq ($(CONFIG_ESP32_FLASH_8M),y)
	FLASH_SIZE="8MB"
else ifeq ($(CONFIG_ESP32_FLASH_16M),y)
	FLASH_SIZE="16MB"
endif

ifeq ($(CONFIG_ESP32_QEMU_IMAGE),y)
	MK_QEMU_IMG=$(TOPDIR)/tools/esp32/mk_qemu_img.sh $(BOOTLOADER) $(PARTITION_TABLE)
else
	MK_QEMU_IMG=
endif

define POSTBUILD
	$(Q) echo "MKIMAGE: ESP32 binary"
	$(Q) if ! esptool.py version 1>/dev/null 2>&1; then \
		echo ""; \
		echo "esptool.py not found.  Please run: \"pip install esptool.py\""; \
		echo "Or run: \"make -C $(TOPDIR)/tools/esp32\" to install all IDF tools."; \
		echo ""; \
		echo "Run make again to create the nuttx.bin image."; \
		exit 1; \
	else \
		if [ -z $(FLASH_SIZE) ]; then \
			echo "Missing Flash memory size configuration for the ESP32 chip."; \
			exit 1; \
		fi; \
		esptool.py --chip esp32 elf2image --flash_mode dio --flash_size $(FLASH_SIZE) -o nuttx.bin nuttx; \
		echo "Generated: nuttx.bin (ESP32 compatible)"; \
	fi
	$(Q) $(MK_QEMU_IMG)
endef