incubator-nuttx/tools/nuttx-gdbinit

############################################################################
# tools/nuttx-gdbinit
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.  The
# ASF licenses this file to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance with the
# License.  You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
# License for the specific language governing permissions and limitations
# under the License.
#
############################################################################

# NOTE: you need to use gdb configured '--with-python'
# usage: gdb -ix=./tools/nuttx-gdbinit nuttx
# new commands: info_nxthreads, nxthread pid, nxcontinue, nxthread_all_bt

set $_current_tcb = 0x0
set $_target_examined = 0x0

define _examine_arch
  python _target_frame = gdb.selected_frame()
  python _target_arch = _target_frame.architecture()

  python if (_target_arch.name() == 'armv7e-m') : \
  gdb.execute("set $_target_arch = \"armv7e-m\"")

  # TODO: qemu (need to distinguish cortex-m and cortex-a)
  python if (_target_arch.name() == 'armv7') : \
  gdb.execute("set $_target_arch = \"armv7e-m\"")

  python if (_target_arch.name() == 'i386:x86-64') : \
  gdb.execute("set $_target_arch = \"i386:x86-64\"")

  # NOTE: we assume that sim has sim_bringup function
  python if (type(gdb.lookup_global_symbol("sim_bringup")) is gdb.Symbol) : \
  gdb.execute("set $_target_arch=\"sim:x86-64\"")
end

define _examine_target
  if ($_target_examined == 0x0)
    _examine_arch

    python gdb.execute("set $_target_has_fpu = 0")
    python if (type(gdb.lookup_global_symbol("fpuconfig")) is gdb.Symbol) : \
    gdb.execute("set $_target_has_fpu = 1")

    python gdb.execute("set $_target_has_smp = 0")
    python if (type(gdb.lookup_global_symbol("g_assignedtasks")) is gdb.Symbol) : \
    gdb.execute("set $_target_has_smp = 1")

    set $_target_max_tasks = sizeof(g_pidhash) / sizeof(struct pidhash_s)

    printf "target examined \n"
    python print("_target_arch.name=" + _target_arch.name())

    # NOTE: i386:x86-64 (qemu) does not work
    #printf "$_target_arch : %s \n", $_target_arch

    printf "$_target_has_fpu : %d \n", $_target_has_fpu
    printf "$_target_has_smp : %d \n", $_target_has_smp
    set $_target_examined = 1
  end
end

define _print_thread
  set $tcb = (struct tcb_s *)$arg0

  if ($tcb == $_current_tcb)
    printf "* "
  else
    printf "  "
  end

  printf "%d Thread 0x%x  (Name: %s, State: %s, Priority: %d) 0x%x in ", \
  $tcb->pid, $tcb, $tcb->name, g_statenames[$tcb->task_state], $tcb->sched_priority, \
  $tcb->xcp.regs[$_pc_reg_idx]
  python _symbol = gdb.execute("info symbol $tcb->xcp.regs[$_pc_reg_idx]", to_string=True); \
  print(_symbol.split()[0] + "()")
end

define _save_tcb
  _examine_target

  set $tcb = $arg0
  if ($_streq($_target_arch, "armv7e-m") == 1)
    if ($_target_has_fpu == 0)
      _save_tcb_armv7e-m $tcb
    else
      _save_tcb_armv7e-mf $tcb
    end
  end
  if ($_streq($_target_arch, "i386:x86-64") == 1)
    _save_tcb_i386x86-64 $tcb
  end
  if ($_streq($_target_arch, "sim:x86-64") == 1)
    _save_tcb_simx86-64 $tcb
  end
end

define _save_current_tcb
  _examine_target

  if ($_current_tcb == 0)
    if ($_target_has_smp == 0)
      set $tcb = (struct tcb_s *)g_readytorun->head
      _save_tcb $tcb
    else
      set $cpu = up_cpu_index()
      set $tcb = (struct tcb_s *)g_assignedtasks[$cpu]->head
      _save_tcb $tcb
    end
    printf "saved current_tcb (pid=%d) \n", $tcb->pid
    set $_current_tcb = $tcb
  end
end

define _switch_tcb
  _examine_target
  _save_current_tcb

  # set the current frame to the newest before switching
  python if (gdb.selected_frame() != gdb.newest_frame()) : \
  gdb.newest_frame().select()

  set $tcb = $arg0
  if ($_streq($_target_arch, "armv7e-m") == 1)
    if ($_target_has_fpu == 0)
      _switch_tcb_armv7e-m $tcb
    else
      _switch_tcb_armv7e-mf $tcb
    end
  end
  if ($_streq($_target_arch, "i386:x86-64") == 1)
    _switch_tcb_i386x86-64 $tcb
  end
  if ($_streq($_target_arch, "sim:x86-64") == 1)
    _switch_tcb_simx86-64 $tcb
  end

  # update _current_tcb
  set $_current_tcb = $tcb
end

# see nuttx/arch/arm/include/armv7-m/irq_cmnvector.h
define _save_tcb_armv7e-m
  set $tcb = (struct tcb_s *)$arg0
  set $tcb.xcp.regs[0] = $sp
  # TODO: basepri/primask
  set $tcb.xcp.regs[2] = $r4
  set $tcb.xcp.regs[3] = $r5
  set $tcb.xcp.regs[4] = $r6
  set $tcb.xcp.regs[5] = $r7
  set $tcb.xcp.regs[6] = $r8
  set $tcb.xcp.regs[7] = $r9
  set $tcb.xcp.regs[8] = $r10
  set $tcb.xcp.regs[9] = $r11
  # TODO: EXC_RETURN (protected)
  set $tcb.xcp.regs[11] = $r0
  set $tcb.xcp.regs[12] = $r1
  set $tcb.xcp.regs[13] = $r2
  set $tcb.xcp.regs[14] = $r3
  set $tcb.xcp.regs[15] = $r12
  set $tcb.xcp.regs[16] = $lr
  set $tcb.xcp.regs[17] = $pc
  # TODO: xPSR

  set $_pc_reg_idx = 17
end

define _switch_tcb_armv7e-m
  set $tcb = (struct tcb_s *)$arg0
  set $sp = $tcb.xcp.regs[0]
  # TODO: basepri/primask
  set $r4 = $tcb.xcp.regs[2]
  set $r5 = $tcb.xcp.regs[3]
  set $r6 = $tcb.xcp.regs[4]
  set $r7 = $tcb.xcp.regs[5]
  set $r8 = $tcb.xcp.regs[6]
  set $r9 = $tcb.xcp.regs[7]
  set $r10 = $tcb.xcp.regs[8]
  set $r11 = $tcb.xcp.regs[9]
  # TODO: EXC_RETURN (protected)
  set $r0 = $tcb.xcp.regs[11]
  set $r1 = $tcb.xcp.regs[12]
  set $r2 = $tcb.xcp.regs[13]
  set $r3 = $tcb.xcp.regs[14]
  set $r12 = $tcb.xcp.regs[15]
  set $lr = $tcb.xcp.regs[16]
  set $pc = $tcb.xcp.regs[17]
  # TODO: xPSR
end

# see nuttx/arch/arm/include/armv7-m/irq_cmnvector.h
define _save_tcb_armv7e-mf
  set $tcb = (struct tcb_s *)$arg0
  set $tcb.xcp.regs[0] = $sp
  # TODO: basepri/primask
  set $tcb.xcp.regs[2] = $r4
  set $tcb.xcp.regs[3] = $r5
  set $tcb.xcp.regs[4] = $r6
  set $tcb.xcp.regs[5] = $r7
  set $tcb.xcp.regs[6] = $r8
  set $tcb.xcp.regs[7] = $r9
  set $tcb.xcp.regs[8] = $r10
  set $tcb.xcp.regs[9] = $r11
  # TODO: EXC_RETURN (protected)
  # TODO: FPU
  set $tcb.xcp.regs[27] = $r0
  set $tcb.xcp.regs[28] = $r1
  set $tcb.xcp.regs[29] = $r2
  set $tcb.xcp.regs[30] = $r3
  set $tcb.xcp.regs[31] = $r12
  set $tcb.xcp.regs[32] = $lr
  set $tcb.xcp.regs[33] = $pc
  # TODO: xPSR

  set $_pc_reg_idx = 33
end

define _switch_tcb_armv7e-mf
  set $tcb = (struct tcb_s *)$arg0
  set $sp = $tcb.xcp.regs[0]
  # TODO: basepri/primask
  set $r4 = $tcb.xcp.regs[2]
  set $r5 = $tcb.xcp.regs[3]
  set $r6 = $tcb.xcp.regs[4]
  set $r7 = $tcb.xcp.regs[5]
  set $r8 = $tcb.xcp.regs[6]
  set $r9 = $tcb.xcp.regs[7]
  set $r10 = $tcb.xcp.regs[8]
  set $r11 = $tcb.xcp.regs[9]
  # TODO: EXC_RETURN (protected)
  # TODO: FPU
  set $r0 = $tcb.xcp.regs[27]
  set $r1 = $tcb.xcp.regs[28]
  set $r2 = $tcb.xcp.regs[29]
  set $r3 = $tcb.xcp.regs[30]
  set $r12 = $tcb.xcp.regs[31]
  set $lr = $tcb.xcp.regs[32]
  set $pc = $tcb.xcp.regs[33]
  # TODO: xPSR
end

# see nuttx/arch/x86_64/include/intel64/irq.h
define _save_tcb_i386x86-64
  set $tcb = (struct tcb_s *)$arg0
  set $tcb.xcp.regs[6 + 64] = $rbx
  set $tcb.xcp.regs[7 + 64] = $rbp
  set $tcb.xcp.regs[10 + 64] = $r12
  set $tcb.xcp.regs[11 + 64] = $r13
  set $tcb.xcp.regs[12 + 64] = $r14
  set $tcb.xcp.regs[13 + 64] = $r15
  set $tcb.xcp.regs[21 + 64] = $rip
  set $tcb.xcp.regs[24 + 64] = $rsp

  set $_pc_reg_idx = (21 + 64)
end

define _switch_tcb_i386x86-64
  set $tcb = (struct tcb_s *)$arg0
  set $rbx = $tcb.xcp.regs[6 + 64]
  set $rbp = $tcb.xcp.regs[7 + 64]
  set $r12 = $tcb.xcp.regs[10 + 64]
  set $r13 = $tcb.xcp.regs[11 + 64]
  set $r14 = $tcb.xcp.regs[12 + 64]
  set $r15 = $tcb.xcp.regs[13 + 64]
  set $rip = $tcb.xcp.regs[21 + 64]
  set $rsp = $tcb.xcp.regs[24 + 64]
end

# see nuttx/arch/sim/src/sim/up_internal.h
define _save_tcb_simx86-64
  set $tcb = (struct tcb_s *)$arg0
  set $tcb.xcp.regs[0] = $rbx
  set $tcb.xcp.regs[1] = $rsp
  set $tcb.xcp.regs[2] = $rbp
  set $tcb.xcp.regs[3] = $r12
  set $tcb.xcp.regs[4] = $r13
  set $tcb.xcp.regs[5] = $r14
  set $tcb.xcp.regs[6] = $r15
  set $tcb.xcp.regs[7] = $rip

  set $_pc_reg_idx = 7
end

define _switch_tcb_simx86-64
  set $tcb = (struct tcb_s *)$arg0
  set $rbx = $tcb.xcp.regs[0]
  set $rsp = $tcb.xcp.regs[1]
  set $rbp = $tcb.xcp.regs[2]
  set $r12 = $tcb.xcp.regs[3]
  set $r13 = $tcb.xcp.regs[4]
  set $r14 = $tcb.xcp.regs[5]
  set $r15 = $tcb.xcp.regs[6]
  set $rip = $tcb.xcp.regs[7]
end

define nxthread
  _examine_target
  _save_current_tcb
  set $hash = ($arg0 & ($_target_max_tasks - 1))
  set $tcb = g_pidhash[$hash].tcb
  if ($tcb != 0x0)
    _print_thread $tcb
    if ($argc == 1)
      _switch_tcb $tcb
    end
    if ($argc == 2)
      if ($arg1 == 1)
	_switch_tcb $tcb
	where
      end
    end
  end
end

define nxthread_all_bt
  _save_current_tcb
  set $i = 0
  while ($i < $_target_max_tasks)
    # 1: backtrace
    nxthread $i 1
    set $i = $i + 1
  end
end

define info_nxthreads
  _save_current_tcb
  set $i = 0
  while ($i < $_target_max_tasks)
    # dummy : 0 0
    nxthread $i 0 0
    set $i = $i + 1
  end
end

define nxcontinue
  printf "nxcontinue \n"
  # TODO: SMP
  set $tcb = g_readytorun->head
  _switch_tcb $tcb
  set $_current_tcb = 0x0
  continue
end