incubator-nuttx/drivers/pci/Make.defs

65 lines
1.7 KiB
Plaintext
Raw Permalink Normal View History

############################################################################
Various fixes for PCI work Squashed commits: 1. Porting prior PCI work in place of jailhouse code At this point the PCI enumeration works for x86_64 including over pci-pci bridges. Running QEMU with this configuration we see the bridge and the device on the bridge. It also detected the qemu test device qemu-system-x86_64 \ -cpu host,+pcid,+x2apic,+tsc-deadline,+xsave,+rdrand \ --enable-kvm -smp 1 -m 2G -cdrom boot.iso --nographic -no-reboot \ -device pci-testdev \ -device pci-bridge,id=bridge0,chassis_nr=2 \ -device e1000,bus=bridge0,addr=0x3 qemu_pci_init: Initializing PCI Bus pci_probe_device: [00:00.0] Found 8086:1237, class/revision 06000002 pci_probe_device: [00:01.1] Found 8086:7010, class/revision 01018000 pci_probe_device: [00:01.2] Found ffff:ffff, class/revision ffffffff pci_probe_device: [00:01.3] Found 8086:7113, class/revision 06800003 pci_probe_device: [00:01.4] Found ffff:ffff, class/revision ffffffff pci_probe_device: [00:01.5] Found ffff:ffff, class/revision ffffffff pci_probe_device: [00:01.6] Found ffff:ffff, class/revision ffffffff pci_probe_device: [00:01.7] Found ffff:ffff, class/revision ffffffff pci_probe_device: [00:02.0] Found 1234:1111, class/revision 03000002 pci_probe_device: [00:03.0] Found 8086:100e, class/revision 02000003 pci_probe_device: [00:04.0] Found 1b36:0005, class/revision 00ff0000 pci_probe_device: [00:04.0] Probing pci_check_pci_bridge: [00:05.0] Found Bridge pci_probe_device: [01:03.0] Found 8086:100e, class/revision 02000003 pci_probe_device: [00:05.0] Found 1b36:0001, class/revision 06040000 2. Remove unused CONFIG_PCI_MAX_BDF option 3. Add a workaround for Jailhouse pci scanning 4. Extend BAR parsing and handle PIO and MMIO for pci-testdev Signed-off-by: Brennan Ashton <bashton@brennanashton.com> 5. PCI: Add initial support for QEMU 'edu' test device Signed-off-by: Brennan Ashton <bashton@brennanashton.com> 6. Bring up PCI later in boot process Signed-off-by: Brennan Ashton <bashton@brennanashton.com> 7. Add ISR and DMA support to QEMU edu test pci device Signed-off-by: Brennan Ashton <bashton@brennanashton.com> 8. Fix bad function prototype definition in qemu_edu 9. intel64: Add a pci test configuration and instructions Signed-off-by: Brennan Ashton <bashton@brennanashton.com> 10. PCI: Fix issue in identification of 64bit bar Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
2020-05-07 17:59:29 +08:00
# drivers/pci/Make.defs
#
# SPDX-License-Identifier: Apache-2.0
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership. The
# ASF licenses this file to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance with the
# License. You may obtain a copy of the License at
2024-01-22 18:12:09 +08:00
#
# http://www.apache.org/licenses/LICENSE-2.0
2024-01-22 18:12:09 +08:00
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
#
############################################################################
Various fixes for PCI work Squashed commits: 1. Porting prior PCI work in place of jailhouse code At this point the PCI enumeration works for x86_64 including over pci-pci bridges. Running QEMU with this configuration we see the bridge and the device on the bridge. It also detected the qemu test device qemu-system-x86_64 \ -cpu host,+pcid,+x2apic,+tsc-deadline,+xsave,+rdrand \ --enable-kvm -smp 1 -m 2G -cdrom boot.iso --nographic -no-reboot \ -device pci-testdev \ -device pci-bridge,id=bridge0,chassis_nr=2 \ -device e1000,bus=bridge0,addr=0x3 qemu_pci_init: Initializing PCI Bus pci_probe_device: [00:00.0] Found 8086:1237, class/revision 06000002 pci_probe_device: [00:01.1] Found 8086:7010, class/revision 01018000 pci_probe_device: [00:01.2] Found ffff:ffff, class/revision ffffffff pci_probe_device: [00:01.3] Found 8086:7113, class/revision 06800003 pci_probe_device: [00:01.4] Found ffff:ffff, class/revision ffffffff pci_probe_device: [00:01.5] Found ffff:ffff, class/revision ffffffff pci_probe_device: [00:01.6] Found ffff:ffff, class/revision ffffffff pci_probe_device: [00:01.7] Found ffff:ffff, class/revision ffffffff pci_probe_device: [00:02.0] Found 1234:1111, class/revision 03000002 pci_probe_device: [00:03.0] Found 8086:100e, class/revision 02000003 pci_probe_device: [00:04.0] Found 1b36:0005, class/revision 00ff0000 pci_probe_device: [00:04.0] Probing pci_check_pci_bridge: [00:05.0] Found Bridge pci_probe_device: [01:03.0] Found 8086:100e, class/revision 02000003 pci_probe_device: [00:05.0] Found 1b36:0001, class/revision 06040000 2. Remove unused CONFIG_PCI_MAX_BDF option 3. Add a workaround for Jailhouse pci scanning 4. Extend BAR parsing and handle PIO and MMIO for pci-testdev Signed-off-by: Brennan Ashton <bashton@brennanashton.com> 5. PCI: Add initial support for QEMU 'edu' test device Signed-off-by: Brennan Ashton <bashton@brennanashton.com> 6. Bring up PCI later in boot process Signed-off-by: Brennan Ashton <bashton@brennanashton.com> 7. Add ISR and DMA support to QEMU edu test pci device Signed-off-by: Brennan Ashton <bashton@brennanashton.com> 8. Fix bad function prototype definition in qemu_edu 9. intel64: Add a pci test configuration and instructions Signed-off-by: Brennan Ashton <bashton@brennanashton.com> 10. PCI: Fix issue in identification of 64bit bar Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
2020-05-07 17:59:29 +08:00
ifeq ($(CONFIG_PCI),y)
CSRCS += pci.c pci_ecam.c pci_drivers.c
ifeq ($(CONFIG_PCI_QEMU_TEST),y)
CSRCS += pci_qemu_test.c
endif
ifeq ($(CONFIG_PCI_QEMU_EDU),y)
CSRCS += pci_qemu_edu.c
endif
ifeq ($(CONFIG_PCI_IVSHMEM),y)
CSRCS += pci_ivshmem.c
endif
ifeq ($(CONFIG_PCI_UIO_IVSHMEM),y)
CSRCS += pci_uio_ivshmem.c
endif
ifeq ($(CONFIG_PCI_EP_TEST),y)
CSRCS += pci_ep_test.c
endif
ifeq ($(CONFIG_PCI_ENDPOINT),y)
CSRCS += pci_epc.c pci_epc_mem.c pci_epf.c
endif
ifeq ($(CONFIG_PCI_QEMU_EPC),y)
CSRCS += pci_qemu_epc.c
endif
ifeq ($(CONFIG_PCI_EPF_TEST),y)
CSRCS += pci_epf_test.c
endif
Various fixes for PCI work Squashed commits: 1. Porting prior PCI work in place of jailhouse code At this point the PCI enumeration works for x86_64 including over pci-pci bridges. Running QEMU with this configuration we see the bridge and the device on the bridge. It also detected the qemu test device qemu-system-x86_64 \ -cpu host,+pcid,+x2apic,+tsc-deadline,+xsave,+rdrand \ --enable-kvm -smp 1 -m 2G -cdrom boot.iso --nographic -no-reboot \ -device pci-testdev \ -device pci-bridge,id=bridge0,chassis_nr=2 \ -device e1000,bus=bridge0,addr=0x3 qemu_pci_init: Initializing PCI Bus pci_probe_device: [00:00.0] Found 8086:1237, class/revision 06000002 pci_probe_device: [00:01.1] Found 8086:7010, class/revision 01018000 pci_probe_device: [00:01.2] Found ffff:ffff, class/revision ffffffff pci_probe_device: [00:01.3] Found 8086:7113, class/revision 06800003 pci_probe_device: [00:01.4] Found ffff:ffff, class/revision ffffffff pci_probe_device: [00:01.5] Found ffff:ffff, class/revision ffffffff pci_probe_device: [00:01.6] Found ffff:ffff, class/revision ffffffff pci_probe_device: [00:01.7] Found ffff:ffff, class/revision ffffffff pci_probe_device: [00:02.0] Found 1234:1111, class/revision 03000002 pci_probe_device: [00:03.0] Found 8086:100e, class/revision 02000003 pci_probe_device: [00:04.0] Found 1b36:0005, class/revision 00ff0000 pci_probe_device: [00:04.0] Probing pci_check_pci_bridge: [00:05.0] Found Bridge pci_probe_device: [01:03.0] Found 8086:100e, class/revision 02000003 pci_probe_device: [00:05.0] Found 1b36:0001, class/revision 06040000 2. Remove unused CONFIG_PCI_MAX_BDF option 3. Add a workaround for Jailhouse pci scanning 4. Extend BAR parsing and handle PIO and MMIO for pci-testdev Signed-off-by: Brennan Ashton <bashton@brennanashton.com> 5. PCI: Add initial support for QEMU 'edu' test device Signed-off-by: Brennan Ashton <bashton@brennanashton.com> 6. Bring up PCI later in boot process Signed-off-by: Brennan Ashton <bashton@brennanashton.com> 7. Add ISR and DMA support to QEMU edu test pci device Signed-off-by: Brennan Ashton <bashton@brennanashton.com> 8. Fix bad function prototype definition in qemu_edu 9. intel64: Add a pci test configuration and instructions Signed-off-by: Brennan Ashton <bashton@brennanashton.com> 10. PCI: Fix issue in identification of 64bit bar Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
2020-05-07 17:59:29 +08:00
# Include PCI device driver build support
Various fixes for PCI work Squashed commits: 1. Porting prior PCI work in place of jailhouse code At this point the PCI enumeration works for x86_64 including over pci-pci bridges. Running QEMU with this configuration we see the bridge and the device on the bridge. It also detected the qemu test device qemu-system-x86_64 \ -cpu host,+pcid,+x2apic,+tsc-deadline,+xsave,+rdrand \ --enable-kvm -smp 1 -m 2G -cdrom boot.iso --nographic -no-reboot \ -device pci-testdev \ -device pci-bridge,id=bridge0,chassis_nr=2 \ -device e1000,bus=bridge0,addr=0x3 qemu_pci_init: Initializing PCI Bus pci_probe_device: [00:00.0] Found 8086:1237, class/revision 06000002 pci_probe_device: [00:01.1] Found 8086:7010, class/revision 01018000 pci_probe_device: [00:01.2] Found ffff:ffff, class/revision ffffffff pci_probe_device: [00:01.3] Found 8086:7113, class/revision 06800003 pci_probe_device: [00:01.4] Found ffff:ffff, class/revision ffffffff pci_probe_device: [00:01.5] Found ffff:ffff, class/revision ffffffff pci_probe_device: [00:01.6] Found ffff:ffff, class/revision ffffffff pci_probe_device: [00:01.7] Found ffff:ffff, class/revision ffffffff pci_probe_device: [00:02.0] Found 1234:1111, class/revision 03000002 pci_probe_device: [00:03.0] Found 8086:100e, class/revision 02000003 pci_probe_device: [00:04.0] Found 1b36:0005, class/revision 00ff0000 pci_probe_device: [00:04.0] Probing pci_check_pci_bridge: [00:05.0] Found Bridge pci_probe_device: [01:03.0] Found 8086:100e, class/revision 02000003 pci_probe_device: [00:05.0] Found 1b36:0001, class/revision 06040000 2. Remove unused CONFIG_PCI_MAX_BDF option 3. Add a workaround for Jailhouse pci scanning 4. Extend BAR parsing and handle PIO and MMIO for pci-testdev Signed-off-by: Brennan Ashton <bashton@brennanashton.com> 5. PCI: Add initial support for QEMU 'edu' test device Signed-off-by: Brennan Ashton <bashton@brennanashton.com> 6. Bring up PCI later in boot process Signed-off-by: Brennan Ashton <bashton@brennanashton.com> 7. Add ISR and DMA support to QEMU edu test pci device Signed-off-by: Brennan Ashton <bashton@brennanashton.com> 8. Fix bad function prototype definition in qemu_edu 9. intel64: Add a pci test configuration and instructions Signed-off-by: Brennan Ashton <bashton@brennanashton.com> 10. PCI: Fix issue in identification of 64bit bar Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
2020-05-07 17:59:29 +08:00
DEPPATH += --dep-path pci
VPATH += :pci
2024-01-22 18:12:09 +08:00
CFLAGS += ${INCDIR_PREFIX}$(TOPDIR)$(DELIM)drivers$(DELIM)pci
endif # CONFIG_PCI