mirror of https://github.com/thesofproject/sof.git
54 lines
1.7 KiB
Matlab
54 lines
1.7 KiB
Matlab
function example_circular_array()
|
|
|
|
% example_circular_array()
|
|
%
|
|
% Creates a circular array configuration blobs for devices
|
|
% with 6 microphones and radius 30 mm
|
|
|
|
% SPDX-License-Identifier: BSD-3-Clause
|
|
%
|
|
% Copyright (c) 2021, Intel Corporation. All rights reserved.
|
|
%
|
|
% Author: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
|
|
|
|
% Circular array with one beam and one output channel
|
|
|
|
az = -180:30:150;
|
|
circular_one_beam(16e3, 100e-3, 8, 28, az);
|
|
circular_one_beam(48e3, 100e-3, 8, 64, az);
|
|
|
|
end
|
|
|
|
% Note: In the example all designs are made 2ch out for the test script
|
|
% in tools/test/audio/tdfb_test.m to work correctly. So in this one beam
|
|
% example there's a dual mono (stereo) output. If there would be no need
|
|
% to build two beams design with same array this could be one channel out.
|
|
|
|
function circular_one_beam(fs, r, n, fir_length, az);
|
|
|
|
% Get defaults
|
|
bf = bf_defaults();
|
|
bf.input_channel_select = 0:(n-1); % Input all n channels to filters
|
|
bf.output_channel_mix_beam_off = zeros(1, n); % For some stereo symmetry
|
|
bf.output_channel_mix_beam_off(2) = 1; % Mic2 to channel 2^0
|
|
bf.output_channel_mix_beam_off(n) = 2; % Mic2 to channel 2^1
|
|
bf.output_channel_mix = 3 * ones(1, n); % Mix all filters to channel 1 and 2
|
|
bf.output_stream_mix = zeros(1, n); % No support yet
|
|
bf.num_output_channels = 2; % Two channels
|
|
bf.num_output_streams = 1; % One sink stream
|
|
bf.array = 'circular'; % Calculate xyz coordinates for circular
|
|
bf.mic_n = n;
|
|
|
|
% From parameters
|
|
bf.fs = fs;
|
|
bf.mic_r = r;
|
|
bf.steer_az = az;
|
|
bf.steer_el = 0 * az;
|
|
bf.fir_length = fir_length;
|
|
|
|
% Design
|
|
bf = bf_filenames_helper(bf);
|
|
bf = bf_design(bf);
|
|
bf_export(bf);
|
|
end
|