sof/tools
Ranjani Sridharan ba26eeff9d topology2: cavs-nocodec: Add support for MTL nocodec topology
The key difference is the DMIC HW IP version.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
2022-04-20 13:52:33 +01:00
..
coredumper coredump-reader: do not hardcode reset vector address 2022-01-05 13:28:51 +00:00
ctl sof-ctl: Allow setting arbitrary size for controls 2022-03-22 13:46:49 +00:00
fuzzer tplg parser: refactor and cleanup part 1 2022-03-24 16:54:40 +00:00
logger Added standard headers include path for MSYS 2022-02-16 12:02:40 +00:00
oss-fuzz CMake: require version 3.13 2021-09-10 17:19:29 +01:00
probes CMake: require version 3.13 2021-09-10 17:19:29 +01:00
scripts tools: Add cmake toolchain file for cross compilation on arm64 2021-01-07 07:16:17 +00:00
sof_ri_info sof_ri_info: add ADL Intel prod key to list of known keys 2021-12-14 10:38:18 +00:00
test topologies: docker --env USE_XARGS, NO_PROCESSORS and VERBOSE 2022-04-05 14:37:28 +01:00
testbench tplg parser: refactor and cleanup part 1 2022-03-24 16:54:40 +00:00
topology topology2: cavs-nocodec: Add support for MTL nocodec topology 2022-04-20 13:52:33 +01:00
tplg_parser tplg parser: refactor and cleanup part 1 2022-03-24 16:54:40 +00:00
tune Tools: Test, Tune: Improve Matlab scripts for EQ testing 2022-02-18 21:47:16 +00:00
.gitignore
CMakeLists.txt CMake: require version 3.13 2021-09-10 17:19:29 +01:00
README.md tools/README: update comment for testbench building 2020-11-11 14:16:19 +08:00

README.md

Sound Open Firmware Tools

This is a collection of open source tools used to develop, test and debug SOF.

Building and Installing

mkdir build_tools
cd build_tools
cmake ..
make
make install

sof-logger

sof-logger is used to print logs delivered from FW dma_trace mechanism, by searching log entries in *.ldc file generated by smex.

Every entry declared in FW is placed in elf output file (e.g. sof-apl) in .static_log_entries section in a form of struct defined in sof/src/include/sof/trace.h in sof fw repo.

*.ldc file contains snd_sof_logs_header (defined in rmbox/logger_convert.c) following by .static_log_entries section incorporated from FW elf file (e.g. sof-apl). snd_sof_logs_header contains basic information about .static_log_entries section like base_address and data_length.

sof-logger works by reading entry parameters value and entries addresses from FW dma_trace mechanism and searching suitable entry in *.ldc file by its address.

Usage sof-logger <option(s)> <file(s)>
			Display mailbox contents
-h			help
-l *.ldc_file		Specify the *.ldc file
-i in_file		Get traces from in_file, instead of the default
			"/sys/kernel/debug/sof/etrace"
-o out_file		Specify the output file, instead of default stdout
-t			Get traces from "/sys/kernel/debug/sof/trace", instead
			of the default "/sys/kernel/debug/sof/etrace"
-u baud			Input data from a UART
-r			Less formatted output for chained log processors
-p			Get traces from stdin, instead of the default
			"/sys/kernel/debug/sof/etrace"
-c			Set timestamp clock in MHz
-e			Enable checking firmware version with default verification file
			"/sys/kernel/debug/sof/fw_version"
-v ver_file		Enable checking firmware version with ver_file file,
			instead of default: "/sys/kernel/debug/sof/fw_version"
-s state_name		Take a snapshot of state. Save the debugfs entries in
			state_name.*.txt.

Examples:

Get traces from "/sys/kernel/debug/sof/etrace" file, verifies fw_version with "/sys/kernel/debug/sof/fw_version" and prints logs to stdout

$ sof-logger -l ldc_file -e

Get traces from "/sys/kernel/debug/sof/etrace" file, verifies fw_version with ver_file file and prints logs to stdout

$ sof-logger -l ldc_file -v ver_file

Get traces from "/sys/kernel/debug/sof/etrace" file and prints logs to stdout

$ sof-logger -l ldc_file

Get traces from "/sys/kernel/debug/sof/etrace" file and prints logs to out_file file

$ sof-logger -l ldc_file -o out_file

Get traces from "/sys/kernel/debug/sof/trace" file and prints logs to stdout

$ sof-logger -l ldc_file -t

Get traces from "/sys/kernel/debug/sof/trace" file and prints logs to out_file file

$ sof-logger -l ldc_file -t -o out_file

Get traces from stdin and prints logs to stdout

$ sof-logger -l ldc_file -p

Get traces from stdin and prints logs to out_file file

$ sof-logger -l ldc_file -p -o out_file

Get traces from trace_dump file and prints logs to stdout

$ sof-logger -l ldc_file -i trace_dump

Get traces from trace_dump file and prints logs to out_file file

$ sof-logger -l ldc_file -i trace_dump -o out_file

c flag is intended for defining clock value (in MHz) used to format log timestamps. By default clock value is set to 19.2 (MHz). Below example set clock value to 19.9 (MHz).

$ sof-logger -l ldc_file -i trace_dump -o out_file -c 19.9

sof-coredump-reader

Tool for processing FW stack dumps. In verbose mode it prints the stack leading to the core dump including DSP registers and function calls. It outputs unwrapped gdb command function call addresses to human readable function call format either to a file or stdout.

Usage sof-coredump-reader.py [-h] [-a ARCH] [-c] [-l COLUMNCOUNT] [-v]
				(--stdout | -o OUTFILE) [--stdin | -i INFILE]

-h			show this help message and exit
-a ARCH			determine architecture of dump file; valid archs are: LE64bit, LE32bit
-c			set output to be colourful
-l COLUMNCOUNT		set how many colums to group the output in
-v			increase output verbosity
--stdin			input is from stdin
-i INFILE		path to sys dump bin
--stdout		output is to stdout
-o OUTFILE		output is to FILE

sof-coredump-to-gdb.sh shows example usage of sof-coredump-reader.py We read from dump file into sof-coredump-reader.py, then we pipe its output to xt-gdb, which operates on given elf-file.

$ ./sof-coredump-to-gdb.sh sof-apl dump_file

tests

To generate all test configuration files:

make tests

testbench

The host testbench is meant to serve as a vehicle to test components for functionality and quality of processed samples.

Compilation steps

Run the rebuild-testbench.sh to build the required libraries for the testbench. It should also build the testbench executable.

Running the Testbench

The test can be invoked by running the "testbench" bin in the src/host directory.

Compile and run using script provided (Recommended):

Set up the input arguments for the test in host-testbench.sh and invoke it to compile the host libraries and execute the testbench.

Known Limitations:

  1. Currently, testbench code supports simple volume topologies only.

  2. When setting up arguments, please keep the same file format for input and output files