// SPDX-License-Identifier: BSD-3-Clause /* * Copyright(c) 2020 Intel Corporation. All rights reserved. * * Author: Liam Girdwood */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* Zephyr includes */ #include #include #include #include #include #include #include #include #include #include LOG_MODULE_REGISTER(zephyr, CONFIG_SOF_LOG_LEVEL); extern K_KERNEL_STACK_ARRAY_DEFINE(z_interrupt_stacks, CONFIG_MP_MAX_NUM_CPUS, CONFIG_ISR_STACK_SIZE); SOF_DEFINE_REG_UUID(zephyr); DECLARE_TR_CTX(zephyr_tr, SOF_UUID(zephyr_uuid), LOG_LEVEL_INFO); /* * Interrupts. * * Mostly mapped. Still needs some linkage symbols that can be removed later. */ /* needed for linkage only */ const char irq_name_level2[] = "level2"; const char irq_name_level5[] = "level5"; /* imx currently has no IRQ driver in Zephyr so we force to xtos IRQ */ #if defined(CONFIG_IMX8M) int interrupt_register(uint32_t irq, void(*handler)(void *arg), void *arg) { #ifdef CONFIG_DYNAMIC_INTERRUPTS return arch_irq_connect_dynamic(irq, 0, (void (*)(const void *))handler, arg, 0); #else tr_err(&zephyr_tr, "Cannot register handler for IRQ %u: dynamic IRQs are disabled", irq); return -EOPNOTSUPP; #endif } /* unregister an IRQ handler - matches on IRQ number and data ptr */ void interrupt_unregister(uint32_t irq, const void *arg) { /* * There is no "unregister" (or "disconnect") for * interrupts in Zephyr. */ irq_disable(irq); } /* enable an interrupt source - IRQ needs mapped to Zephyr, * arg is used to match. */ uint32_t interrupt_enable(uint32_t irq, void *arg) { irq_enable(irq); return 0; } /* disable interrupt */ uint32_t interrupt_disable(uint32_t irq, void *arg) { irq_disable(irq); return 0; } #endif /* * i.MX uses the IRQ_STEER */ #if !CONFIG_IMX void interrupt_mask(uint32_t irq, unsigned int cpu) { /* TODO: how do we mask on other cores with Zephyr APIs */ } void interrupt_unmask(uint32_t irq, unsigned int cpu) { /* TODO: how do we unmask on other cores with Zephyr APIs */ } #endif void platform_interrupt_set(uint32_t irq) { /* handled by zephyr - needed for linkage */ } void platform_interrupt_clear(uint32_t irq, uint32_t mask) { /* handled by zephyr - needed for linkage */ } /* * Asynchronous Messaging Service * * Use SOF async messaging service. */ static struct async_message_service *host_ams[CONFIG_CORE_COUNT]; struct async_message_service **arch_ams_get(void) { return host_ams + cpu_get_id(); } /* * Notifier. * * Use SOF inter component messaging today. Zephyr has similar APIs that will * need some minor feature updates prior to merge. i.e. FW to host messages. * TODO: align with Zephyr API when ready. */ static struct notify *host_notify[CONFIG_CORE_COUNT]; struct notify **arch_notify_get(void) { return host_notify + cpu_get_id(); } /* * Debug */ void arch_dump_regs_a(void *dump_buf) { /* needed for linkage only */ } /* * Xtensa. TODO: this needs removed and fixed in SOF. */ unsigned int _xtos_ints_off(unsigned int mask) { /* turn all local IRQs OFF */ irq_lock(); return 0; } int task_main_start(struct sof *sof) { /* init default audio components */ sys_comp_init(sof); /* init pipeline position offsets */ pipeline_posn_init(sof); return 0; } static int boot_complete(void) { #ifdef CONFIG_IMX93_A55 /* in the case of i.MX93, SOF_IPC_FW_READY * sequence will be initiated by the host * so we shouldn't do anything here. */ return 0; #else /* let host know DSP boot is complete */ return platform_boot_complete(0); #endif /* CONFIG_IMX93_A55 */ } int start_complete(void) { /* * called from primary_core_init(), track state here * (only called from single core, no RMW lock) */ __ASSERT_NO_MSG(cpu_get_id() == PLATFORM_PRIMARY_CORE_ID); #if defined(CONFIG_PM) pm_policy_state_lock_get(PM_STATE_RUNTIME_IDLE, PM_ALL_SUBSTATES); pm_policy_state_lock_get(PM_STATE_SOFT_OFF, PM_ALL_SUBSTATES); #endif return boot_complete(); } /* * Timestamps. * * TODO: move to generic code in SOF, currently platform code. */ /* get timestamp for host stream DMA position */ void platform_host_timestamp(struct comp_dev *host, struct sof_ipc_stream_posn *posn) { int err; /* get host position */ err = comp_position(host, posn); if (err == 0) posn->flags |= SOF_TIME_HOST_VALID; } /* get timestamp for DAI stream DMA position */ void platform_dai_timestamp(struct comp_dev *dai, struct sof_ipc_stream_posn *posn) { int err; /* get DAI position */ err = comp_position(dai, posn); if (err == 0) posn->flags |= SOF_TIME_DAI_VALID; /* get SSP wallclock - DAI sets this to stream start value */ posn->wallclock = sof_cycle_get_64() - posn->wallclock; posn->wallclock_hz = clock_get_freq(PLATFORM_DEFAULT_CLOCK); posn->flags |= SOF_TIME_WALL_VALID; } /* get current wallclock for componnent */ void platform_dai_wallclock(struct comp_dev *dai, uint64_t *wallclock) { *wallclock = sof_cycle_get_64(); } /* * Multicore * * Mostly empty today waiting pending Zephyr CAVS SMP integration. */ #if CONFIG_MULTICORE && CONFIG_SMP static struct idc idc[CONFIG_MP_MAX_NUM_CPUS]; static struct idc *p_idc[CONFIG_MP_MAX_NUM_CPUS]; struct idc **idc_get(void) { int cpu = cpu_get_id(); p_idc[cpu] = idc + cpu; return p_idc + cpu; } #endif #define DEFAULT_TRY_TIMES 8 int poll_for_register_delay(uint32_t reg, uint32_t mask, uint32_t val, uint64_t us) { uint64_t tick = k_us_to_cyc_ceil64(us); uint32_t tries = DEFAULT_TRY_TIMES; uint64_t delta = tick / tries; if (!delta) { /* * If we want to wait for less than DEFAULT_TRY_TIMES ticks then * delta has to be set to 1 and number of tries to that of number * of ticks. */ delta = 1; tries = tick; } while ((io_reg_read(reg) & mask) != val) { if (!tries--) { LOG_DBG("poll timeout reg %u mask %u val %u us %u", reg, mask, val, (uint32_t)us); return -EIO; } wait_delay(delta); } return 0; } /* Mutable, volatile and not static to escape optimizers and static * analyzers. */ volatile int *_sof_fatal_null = NULL; struct arch_esf; void k_sys_fatal_error_handler(unsigned int reason, const struct arch_esf *esf) { ARG_UNUSED(esf); /* flush and switch to immediate mode */ LOG_PANIC(); ipc_send_panic_notification(); #if defined(CONFIG_ARCH_POSIX) || defined(CONFIG_ZEPHYR_POSIX) LOG_ERR("Halting emulation"); /* In emulation we want to stop _immediately_ and print a useful stack * trace; not a useless pointer to some signal handler or Zephyr * cleanup routine. See Zephyr POSIX limitations discussed in: * https://github.com/zephyrproject-rtos/zephyr/pull/68494 */ *_sof_fatal_null = 42; #else LOG_ERR("Halting system"); #endif k_fatal_halt(reason); }