The DTS Codec can be conditionally added to the sof-adl-nau8825 topology
on those pipelines intended for headphone and speaker output.
Signed-off-by: Joe.Cheng <joe.cheng@xperi.com>
For builds with no Hotword on DSP, generic dmic m4 is used.
RTNR is running on DMIC CORE ID 1. Hence adding the flag.
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
No functional change.
Move some common testbench code into the topology parser and group
feature parsing by file name.
Add a tplg_ prefix to external APIs without a prefix, others with an
existing prefix to follow this change.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
sof-ctl assumed the binary control were of size of a
multiple of unsigned integer.
This caused the control byte array to be truncated when the
size of the control was 6 bytes.
This change allow setting any size of control in binary form.
Using CSV will always end up with a number of unsigned integer size.
I tested this change using the Google RTC Audio processing with control
of size:
- 6 bytes,
- 2 bytes
- and 4 bytes.
Signed-off-by: Lionel Koenig <lionelk@google.com>
NO_AGGREGATION is never used now. Let's remove it.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
This patch adds build of topologies sof-hda-generic-multiband-drc.tplg
and sof-hda-generic-2ch-multiband-drc.tplg. The processing happens in
pipeline part after mixer. Volume is controlled in PGA before mixer.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Remove the extra argument for fprintf(). For some reason there was
no harm seen but this should trigger an error when run in Octave or
Matlab.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Due to m4 peculiarities it is require to escape the content of an
ifdef. I forgot to add those escaping for around the `SPK_MIC_PERIOD_US`
definition leading to erroneous value if GOOGLE_RTC_AUDIO_PROCESSING was
defined.
Signed-off-by: Lionel Koenig <lionelk@google.com>
This is a temporary work-around to enable CI tests while performance
is being optimized.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
This should make sure to surface pipeline period and microphone
processing in the top topology file so incoherence are easier to spot
and correct.
I compared topology1/production/*.conf outputs prior and after the
change: except some new line and comment change introduced by the
simplification, there are no changes.
Signed-off-by: Lionel Koenig <lionelk@google.com>
When host is more heavy loading(e.g. camera recoding case),
the size of dai buffer is 4ms and not enough. Increase 2ms
period capture pipeline to buffer more data to avoid overrun.
Signed-off-by: YC Hung <yc.hung@mediatek.com>
It's not clear why the initial contribution used mclk ID1, mclk ID0 is
used by 99% of devices - and a manual inspection of NHLT supports that
claim. We will have to deal with the MCLK ID1 case with quirks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Some builds require more memory, hotword can be handled by CRAS so lets
add the ability to drop it. The 16kHz dmic is not needed either so lets
drop that too.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Include dmic-generic conditionally based on NUM_DMIC's and add nhlt
build support in CMake variables.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Move all defaults variable definitions to dmic-default.conf. These should
be included by all topologies before overriding the defaults with
platform-specific or machine-specific definitions.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
The explanation takes sof-adl-max98357a-rt5682 as an example:
During pipeline_complete(), we search for the source widget
for a pipeline from a list and the ipc_get_ppl_comp() returns
the first widget from the list of source widgets for a pipeline.
With SSP2.IN on pipeline 1, which is the same pipeline ID as the
ECHO_REF playback pipeline for PCM0P, pipeline_complete() for
pipeline 1 ends up not walking the rest of widgets in pipeline 1.
This Echo Ref feature works in chrome kernel today by accident,
because we set up the widgets in the reverse order after resuming
from runtime suspend and the source widget happens to be PCM0P.
To fix this, create a new pipeline for the capture dai widget SSP2.IN,
so that it doesn't pollute the widget list for pipeline 1.
Fixes: #5395
Signed-off-by: Chao Song <chao.song@linux.intel.com>
We declare that S24_LE is supported by a HDA PCM, but 24 bit audio
format is not included in the available audio format list.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
The DAI copiers only support 32-bit format. Change the gain-playback and
gain-capture to set the input/output bit-depth to match the DAI copier
requirement.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Add the input/output bit depth's for the BE DAI copier for the DMIC
capture pipeline.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
format
Only the host copier should do the conversion based on the runtime
params. The DAI copiers should always support only 32-bit playback and
capture. So, fix the input/output formats for the copiers in the
respective pipelines.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
The test scripts missed test component keyword change from e.g.
eqiir to eq-iir. Due to this the process_test() failed for IIR and
FIR for gain and frequency response due to wrong result expect.
The expected result is retrieved with the blob decode function. It
can be also used manually to check the filters defined in the
blob. The help texts in the decode functions needed fix. Also some
usage examples were added.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Currently we build separate topologies for TGL and CNL since their
io_clk's are different. Eventually, we'd need to unify these and let the
driver handle the blob selection in the kernel.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
This reverts commit f50b6fe0ad.
I discovered the hard way that this change causes alsatplg version
1.2.2 (the default version in the current LTS Ubuntu) to corrupt just
a few bytes in .tplg output in an incredibly discrete and
time-consuming way: no error message at build time and same file size.
See example at https://github.com/thesofproject/sof/pull/5162.
We could/should just require a minimum alsatplg version at the CMake
level but at this moment we don't even know which minimum version is
needed and we would also need to take some time to test a few alsatplg
versions. If version 1.2.2 would just fail with an decent error
message that can be searched and discussed then everything would be
fine but silent corruption is really not OK.
So users of recent versions will unfortunately have to live with the
huge number of warnings for now.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Windows users building with MSYS2 need to provide additional include
path to the POSIX standard headers to build sof-logger with GCC.
Added this include directory when environmental variable
MSYS_INSTALL_DIR is set.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
Newer gcc compilers 9.1+ issue a W-char-subscripts warning when argument
type passed to isspace is not explicitly int. Added cast to int.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
We only want the mixin/mixout based HDA and passthrough HDMI topologies.
Delete everything else.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
The codec adapter component only uses a single config now. So remove the
runtime config kcontrol as the same kcontrol can be used for runtime
config as well.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
We cannot have one single pipeline going from the host copier to the DAI
copier. So split the passthrough pipeline into host and DAI pipelines.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Add gain widgets before and after the mixers in all the
mixin/mixout-based pipelines. Change the cavs-mixin-mixout-hda.conf
topology to add the mixer names for all gain widgets.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Joe.Cheng