The patch adds the playback and capture test pipelines. The
configuration is set to `tdfb_coef_line2_50mm_pm90deg_16khz.m4'.
A mistake in PIPELINE_FILTERx macro defining is fixed for IIR and
FIR. The pipeline macros expect it to contain an include file or
no macro defined at all. Defining it for empty string caused fail
in topologies build when PIPELINE_FILTER1 is used for TDFB.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch updates the tplg-build.sh script by omitting DMIC capture
test topologies generation, tone topolgies generation due to no
use and no maintenance. They can be fixed later.
The all DAI permutations are generated only for volume pipeline. The
src is removed. Instead a new algorithms topologies generation loop
is added for UP2 (APL) compatible topologies. The algorithms are
ASRC, FIR, IIR, and SRC.
The test-all, capture, playback macros are updated to use
PIPELINE_PCM_ADD and set up DAI for SCHEDULE_TIME_DOMAIN_TIMER. The
duplication of TEST_DAI_PORT in macro call is replaced by 0 to
prevent topology load fail on device.
The test-equalizer-playback-ssp.m4 is removed as obsolete.
Pipelines are added for FIR and IIR playback and capture. SRC playback
pipeline is improved by making tokens instance specific. The SRC
capture pipeline macro is only cosmetically improved.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Enable setting pcm min and max rate from top level m4 pipeline macro.
This way it is possible to configure the whole pipeline to correct
samplerate range in 1 file. Previously you needed to modify the pipeline
macros where the rate was hardcoded. As the frame count is calculated
from pcm/dai rate and scheduling time the frame count is obsolete.
Introduce pipeline rate parameter to help configuring components with
fixed output rate. We can't deduce this from pcm range since for example
src might accept bigger max rate than the following dai. Even though the
parameter is named "pipeline rate" it essentially means the "final"
output rate to which this pipeline is connected to (dai or other
pipeline). In capture pipelines it means the originating fixed dai rate.
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
This patch adds to all DMIC related topologies the new token
SOF_TKN_INTEL_DMIC_UNMUTE_RAMP_TIME_MS. The value is set to 400
to correspond to 400 milliseconds long unmute ramp time. The
topology defined unmute will override the firmware internal
hard coded value if it is set in topology.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Seppo Ingalsuo