This patch enables clock gating in configurations of a ace platforms.
With CONFIG_ADSP_IDLE_CLOCK_GATING enabled clock gating is always
enabled during WAITI.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
- This test has failed on MTL since it was enabled. Running tests that
we systematically ignore the failure of is much worse than not running
them because it provides a false impression of quality.
- This can cause DSP panics as seen in
https://github.com/thesofproject/sof/pull/8621
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Add a ZTEST test-suite to run SOF boot-time self-tests at the time of
the first FW_GEN_MSG IPC.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
This patch adds DTS_CODEC for IPC4 Intel platform builds.
Since EQ IIR + DTS is the combination we use to support customer, adding
EQ IIR here to ensure it's enabled.
Signed-off-by: Joe Cheng <joe.cheng@xperi.com>
This commit is needed because the current Linux kernel
version used in our internal testing doesn't
contain the patches that enable MU2's power.
As such, to avoid failures in the internal tests,
disable the CCM and LPUART2 IPs.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Removes the misplaced code in smart_amp.c for the fix, then
re-enables CONFIG_COMP_SMART_AMP on building stub images.
Signed-off-by: Pin-chih Lin <johnylin@google.com>
Fixes commit deed9a8808 ("scripts: fuzz: add support for build and
overlays")
The main issue was the way fuzz.sh was trying to parse the overlay
file. Drop that and just pass it as is to `west` and `cmake` instead,
they know what to do with it.
Also:
- Fix invalid syntax in stub_build_all_ipc4.conf
- Make fuzz.sh shellcheck-clean again. Always use shellcheck.
- Temporarily disable `CONFIG_COMP_SMART_AMP` in
stub_build_all_ipc3.conf because `smart_amp.c` does not compile (in
any configuration)
```
sof/src/audio/smart_amp/smart_amp.c:748:9: error:
no member named 'in_channels' in 'struct smart_amp_data'
sad->in_channels = audio_stream_get_channels(&source_buffer->stream);
```
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Addition of SRC Lite module,
which only supports a subset of conversions
supported by the SRC module.
Purpose of SRC Lite module is memory optimization.
Code of SRC Lite is drastically reduced and requires
significantly less memory. When needed one of
defined conversions, driver can choose SRC Lite
module instead of SRC module to optimize memory utilization.
48 -> 16kHz
44.1 -> 16 kHz
32 -> 16 kHz
44.1 -> 48
Signed-off-by: Fabiola Kwasowiec <fabiola.kwasowiec@intel.com>
KD topology tests fail on LNL due to insufficient size of
heap memory. During creation of KD topologies with
4ch audio format, FW fails on memory allocation.
The patch increases HEAPMEM size.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
The LNL board does not use DMA_DW driver, so the board
file should not set any build options specific to that
driver.
This fixes build warning:
--cut--
warning: DMA_DW_SUSPEND_DRAIN (defined at
drivers/dma/Kconfig.dw_common:27, drivers/dma/Kconfig.dw_common:27,
drivers/dma/Kconfig.dw_common:27) was assigned the value 'y' but got the
value 'n'.
---cut--
Link: https://github.com/thesofproject/sof/issues/8356
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
previously, performance measurement based on platform clock, source
clock is 38.4mhz, for better align with CPC calculation, change
clock to dsp clock, this will be done through enable config:
CONFIG_TIMING_FUNCTIONS, and this config only be used with perf_cnt
header file, so this change only have impact on performance build.
Signed-off-by: Baofeng Tian <baofeng.tian@intel.com>
Add a sparse-specific workaround for the incompatibility with
picolibc (the new Zephyr default)
https://github.com/zephyrproject-rtos/zephyr/issues/63003
Also fix comment in commit 2a9473a17b ("app/prj.conf: disable PICOLIBC
with CONFIG_MINIMAL_LIBC=y"): we don't need to disable PICOLIBC
_everywhere_; we only need to disable it when using sparse.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Starting from Zephyr commit f0daf904bb02, CONFIG_PICOLIBC is on by
default.
PICOLIBC does not seem compatible with sparse yet:
https://github.com/zephyrproject-rtos/zephyr/issues/63003
Even if it were compatible with sparse, it seems like a pretty big
change that we should not immediately and blindly accept.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
We build tgl and tgl-h with ipc4 by default, those
ipc4 overlays are empty now, can be removed safely.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Logging with probes was not implemented. This implements
ipc that enables logging with probe configuration.
Signed-off-by: Jakub Dabek <jakub.dabek@intel.com>
Tone component has been without maintenance and validation,
and there is no interface to control sound generation from
user space so it will be deprecated and removed from successive
release.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This reverts commit 80c6738b89.
The Zephyr default changed in commit 385ad46a39ca so this is not needed
anymore.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Now that Intel cAVS2.5 has been migrated to use native Zephyr
drivers, we have no need to keep the Intel specific XTOS
drivers in the tree anymore.
Adjust board configuration files to not refer to removed
Kconfig options.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
The IPC3 build is no longer supported for Intel cAVS2.5 target,
so move the config overlay definitions as-is to the main
board config file.
To smoothen the transition, keep an empty IPC4 overlay file
in the tree to allow developers to update build scripts.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Enables extraction and injection probes for MTL platform.
NOTE: this commit does NOT enable probe log backend.
Signed-off-by: Serhiy Katsyuba <serhiy.katsyuba@intel.com>
With Zephyr commit cc5763344709 ("Build system: disable
`OUTPUT_DISASSEMBLY` by default"), generation of zephyr.lst
is disabled by default.
Enable disassembly generation in SOF configuration as it is expected by
SOF builds rules for reproducible builds.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Utilize the posix build so that as many components as possible can be
built at once. Also build a bunch of `default n` components as well.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Zephyr turns on by default CONFIG_PM_DEVICE_RUNTIME_EXCLUSIVE option
what causes Devices using Zephyr Device System Power Manager to
be ignored during SoC power transition. Disabled this option so we
can use default Zephyr kernel behavior to shut down Devices.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
We plan to get rid of mimx93_evk_a55_sof board and use the
generic mimx93_evk_a55 board + overlays.
This patch adds the config fragment to enable mimx93_evk_a55 board for
SOF.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
We will use SOF app with default mimx93_evk_a55 board on top
of which will add necessary adaptations.
e.g we will define SOF required memory areas in the overlay
and will get rid of mimx93_evk_a55_sof board.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
The config CONFIG_LOG_FUNC_NAME_PREFIX_xxx is only
enabled for ACE platforms and INF log level, and the
timestamp used is different on TGL and MTL, which
is not quite consistent.
This patch make sure the log format is consistent
among platforms and log levels.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
We need to enable CONFIG_DEBUG_COREDUMP_MEMORY_DUMP_MIN according to
comments in coredump_core.c: When dumping minimum information, the
current thread struct and stack need to be dumped so debugger can
examine them.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Zephyr has hardcoded this to 'y' because it saves CI some disk space
when compiling hundreds of different zephyr/tests/, each in a separate
build directory. But when compiling just one "sof/app" it saves
practically no space, breaks the incremental build and can make it more
difficult to troubleshoot some build issues. So, reset it to the default
value.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Rander Wang