remove the HDA_DAI_CONFIG macro and reuse the DAI_CONFIG
macro with type HDA. This will ensure the hw_config
section gets added for HDA dai's as well.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
On some systems the DSP has no DMA interface to the host and is
using a serial port for sending its trace. This patch adds a "-u"
argument to specify a baudrate, that should be used with the serial
interface. The implementation takes care of spurious bytes,
sometimes seen in the beginning of the trace, produced by the port
initialisation by the DSP. The format is fixed to 8N1.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
1. Programs shouldn't exit with negative return values, strictly
speaking only EXIT_SUCCESS and EXIT_FAILURE should be used,
however it is also valid to return 0 for success and any number
from 1 to 125 for a failure.
2. Avoid passing complete structs as function parameters where an
additional copy of one isn't needed, use const pointers instead.
3. Remove a left-over unused argument.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
This patch adds a volume component after SRC to be able to convert
the variable pipeline s16/s24/s32 PCM format into PCM format used
by DAI. The PCM capabilities are changed to allow all formats.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch adds to IIR EQ capability to convert from s32 source to
s16/s24/s32 sink formats in normal PCM samples equalization. The
feature is useful in microphone equalization where input dynamic
range is high but where pipeline needs to be lower word length. A
typical IIR high-pass response when combined with gain will reduce
the dynamic range by suppressing lowest frequencies from signal to
better fit the smaller sample word length.
The PCM capability in topology macro pipe-eq-capture.m4 is changed to
allow the s16/s24/s32 formats.
The patch also includes 4096 bytes increase to SOF_TEXT_SIZE for CNL
platform.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch updates the provided example responses as data for
sof-eqctl and in the include files for topologies. The updates into
Matlab scripts are included also. The FIR and IIR example script is
updated to contain all examples.
The patch includes also a bug fix into IPC handler where the check
against SOF_IPC_MSG_MAX_SIZE is off by one and caused it to reject
all set data commands (to the EQs).
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch adds 50 kHz into SRC generator script for std and tiny
profiles. The src generator script is cleaned up and the default
conversion matrix is moved into caller script for easier maintenance.
The plots appearance is improved and the generated coefficients code
look is improved to pass the git pre- and post-commit script
requirements.
The SRC test bench scripts are updated for changed locations. A SRC
playback topology is used for test bench and real device usage.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
By default topology is using too many capture and playback PCMs, DAIs and
pipelines for available host GW DMAC channels. Comment out some so that
DMAC channels stay within bounds. This also gives users options to
re-enable for theer given test HW.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
The requirement for DMIC capture is to support upto 4ch
and 16-bit format. So modify the topology accordingly.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Somehow those two files should only differ on SSP connections and MCLK
ID1, so it's pretty obvious no one has tested this since August...
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
This refinement follows commit on WHL
topology: whl: refine topology for hda on whl
Fix the issue that ipc timeout when simutalously playback
and capture. Now in FW, playback and capture are supported
by different dai. So dai index should be different for playback
and capture in the same be dai, or playback would use the same
dai as capture
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
This patch adds into filter tools retrieving of ABI version from a
single function (a quick solution) and updates all configuration
data tools to apply the user ABI header.
The confusing platform_max_channels struct field is renamed to
channels_in_config (the EQ channel map) that creates many updates. The
EQ response plot title is fixed.
Finally new functions to decode IIR and FIR settings blobs is added.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
The ext bytes read response parsing needs a fix since it now includes
the ABI header. A warning is printed if max control size is reached.
The example configurations are also updated to contain the header.
The patch also includes new IIR and FIR setup for pass-through
configuration (for testing) that configures the EQ component to totally
pass the filter computation.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch adds the ABI header into topology EQ data files and updates
the pipe-eq-volume-playback.m4 to include the coefficients from m4
directory like other topology files to prevent duplication of
response data.
The CONTROLBYTES_MAX is decreased to 304 due to larger IPC header size.
The update is not critical since the kernel contains other checks to
cover this. However it's done to avoid confusion.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Modify hard-coded virtual widgets to prevent kernel
warnings generated by the machine driver. No need to
add virtual_dapm_routes. Just adding the required virtual
widgets suffices to suppress the warnings.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Modify virtual_widget macro definition to take type as
an input so it can used for different types and update
its users.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Fix the issue that ipc timeout when simutalously playback
and capture. Now in FW, playback and capture are supported
by different dai. So dai index should be different for playback
and capture in the same be dai, or playback would use the same
dai as capture
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
I've added abi_version verification. Be default logger verify: abi
in *.ldc file with logger abi version. Additionally, logger can verify
abi in "/sys/kernel/debug/sof/fw_version" (with -e flag) or in
ver_file (with -v ver_file) with logger abi version.
Signed-off-by: Bartosz Kokoszko <bartoszx.kokoszko@linux.intel.com>
Ranjani Sridharan