This blob exercises fully the features of DRC and is
therefore useful for performance evaluation in all
operation regions.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This blob exercises fully the features of DRC and is
therefore good for testbench runs to evaluate performance
in all operation regions.
The pipeline pipe-drc-playback.m4 is used only with testbench
so it is safe to change to use this blob.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch adds build of hda-generic development topologies to
test IGO NR component with all s16/s24/s32 formats.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Currently, the minimum number of channels for the capture PCM
is set to the same value as the maximum number. This restricts
the number of channels supported by the PCM to the maximum number.
This is wrong if we want to allow arecord to work with multiple channel
values. As such, follow the example of "pipe-volume-playback.m4" and
introduce a new macro: LOCAL_CHANNELS_MIN. This will be set to
"CHANNELS_MIN" if said macro is defined, otherwise it will be set to
2.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Remove the rest of channels and rate attribute values from pipeline
instamces and remove rate attribute definition from
pipeline-common.conf. There was no channels attribute definition in
pipeline-common.conf, not to mention *_min and *_max attributes.
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
This commit removes all defined values for rate, rate_min, rate_max,
channels, channels_min, and channels_max, from all pipeline
definitions under include/pipelines/cavs. The commit also removes them
from the usage examples in the comments.
The removed pipeline level attribute values are obsolete.
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Make the HDMI_USE_CHAIN_DMA set to true by default as enabling it for every
configuration just does not scale.
The generic HDA topologies enabled this for all IPC4 platforms already.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
In practice all HDA links (on LNL SDW/SSP/DMIC also) can use ChainDMA, but
the flag is used to enable this only for display links.
Rename the flag to be precise about this.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
From 48k input, the obs for 11025/22050/44100/88200/176400 setting
need take care, previous implementation left 5 words redundancy
for output, this change removed redundancy, since actual output
buffer size always use double obs size.
Signed-off-by: Baofeng Tian <baofeng.tian@intel.com>
22050Hz obs also need a separate setting, this was missed when first
create this file, now move it to the group with obs setting.
Signed-off-by: Baofeng Tian <baofeng.tian@intel.com>
This patch adds build of hda-generic development topologies to
test RTNR component with all s16/s24/s32 formats.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch allows to build topologies to use the RTNR
component. Two bytes control blobs are converted from
topology1 to IPC4 format.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
To indicate the SoundWire amp need to use 24 bit format.
I use a flag instead of a macro like $SDW_AMP_FMT to set valid_bit_depth
because bit_depth and valid_bit_depth may not be the same.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
The multi-core topology was created since multi-core feature had a few
bugs at that time so it was for validation test. Now this feature works
fine so merge it into nocodec topology then it will be tested by
github CI. And we don't need to maintain a dedicated multi-core topology.
Signed-off-by: Rander Wang <rander.wang@intel.com>
It was confirmed that the IPC4 version of Google RTC AEC
is not using the bytes control, so it can be safely removed
from topology.
This fixes topologies build error:
ALSA lib conf.c:838:(get_char_skip_comments)
Cannot access file include/components/google-rtc-aec/rtc-aec-blob.conf
Fixes: 64fcebbd64
("Tools: Topology2: Add nocodec topology to test google-rtc-aec")
Fixes: #8357
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This removes a lot of warning noise and may help spot other warnings
like `ALSA lib ops.c:48:(lookup_ops) wrong kcontrol ops value string ''`
and others.
Now that commit 1b1ec6c492 ("topology/cmake: skip all topologies when
alsatplg < 1.2.5") enforces alsatplg version >= 1.2.5, it is finally safe
to do this!
I compared the generated .tplg files before/after this commit and
they're bit for bit identical. Tested with both alsatplg v2.6.1 from
Ubuntu 22 and version 1.2.9 from the SOF docker container.
Note this is a much smaller commit than the reverted
commit f50b6fe0ad ("topologies: switch all .m4 files to codec_provider
and codec_consumer") because most topologies v1 have been removed from
the main branch. Most topologies v1 are now only in stable-v2.2 where
the warning spam is still a problem :-(
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Set correct TDM slot width to 32 bits.
The error has been discovered after commit
0ba64e98ec ("SAI: use topology params").
We start using the tdm_slot_width from topology,
rather than hardcoded in code.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
RTC_AEC module is using DP and rest of pipeline is LL and both can
run on different cores.
For the purpose to assign DP module individually on secondary core,
now add a new macro GOOGLE_AEC_DP_CORE_ID.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
This pipeline PCM -> ASRC -> DAI is used only in testbench test
topologies usage. None of the normal topologies build in SOF
use it. Since testbench can't support without failure the DAI
timestamps, the asynchronous mode is disabled. This allows
to test ASRC objective audio quality similarly as normal SRC.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Add cavs-mixin-mixin-mixout-eqiir-dts-ssp.conf to support EQ IIR + DTS
processing on rt5682
Co-developed-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Joe Cheng <joe.cheng@xperi.com>
In order to adopt more different playback pipelines, refer to
sof-hda-generic.conf and move playback pipeline in cavs-rt5682.conf to
cavs-mixin-mixout-ssp.conf.
Co-developed-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Joe Cheng <joe.cheng@xperi.com>
This commit adds DTS componenet and pipeline for topology2.
1. DTS component
2. A new pipeline to support EQ IIR + DTS processing
dts_spk.conf includes the parameters for DTS SDK V1.1.3
Co-developed-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Joe Cheng <joe.cheng@xperi.com>
In non sdw-dmic case, dai incremental id without it, so correct
HDMI1/2/3_ID sequence from default 5,6,7 to 4,5,6.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
This patch adds the aria test topologies build. Aria supports
only s32 format so the s16 and s24 versions build is left
out.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch adds test topologies build for gain component. Testing
of gain can be done with all supported s16/s24/s32 source and sink
formats. The topologies normally use only the s32 format
internally.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
The create of component benchmark topologies is moved to
other included file from CMakeLists.txt.
The adding of new components with custom parameters for
multiple formats and platforms is simplified with nested
foreach loops. The previous topologies for TGL are now
built also for MTL.
Due to use of "IN ZIP_LISTS" with foreach, cmake requirement
is bumped to 3.17 for topology2.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
The includes to define bytes and mixer controls classes are
needed in case no other class definition has included these.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch adds to benchmark topologies template .conf files
generator commented out control examples types for easier
ALSA controls create.
The controls include files are renamed since they may
contain all controls types and not just bytes.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Example: if a module has 2 input pins, one 16000/16/2, second 48000/16/2 and
one output pin 48000/32/4 and is designed to process 10ms data chunks:
in pin1 IBS should be 16(samples/1ms) * 2 bytes * 2 * 10(ms) = 640
in pin2 IBS should be 48(samples/1ms) * 2 bytes * 2 * 10(ms) = 1920
out pin1 OBS should be 48(samples/1ms) * 4 bytes * 4 * 10(ms) = 7680
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Andrula Song