When using a clang Cadence toolchain to build SOF and LLEXT modules
we need to select a different LLEXT type than when using a Zephyr gcc
toolchain.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Add a new overlay to enable logging via winstream backend. This is
alternative memory window based logging backend that typically
uses memory window 3 as transport. The backend is directly
using Zephyr winstream protocol, and has no dependency to SOF
IPC definitions.
One client is available in Zephyr upstream at:
zephyr/soc/intel/intel_adsp/tools/cavstool.py
Note: winstream backend is not supported by Linux SOF driver.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
In commit 14c4e86757 ("audio: base_fw: add platform layer to IPC4
hw_config data"), the platform specific code was moved to platform
layer.
This commit implements a lighter weight abstraction for the moved
code. Instead of using the platform layer, the Intel specific vendor
code is added directly in base_fw_intel.c and guarded by a Kconfig.
All other IPC4 build targets will use an empty implementation.
This avoids the need to add a platform definition for all IPC4 targets.
The common implementation in base_fw.c is sufficient to cover all
mandatory functionality required e.g. by the upstream SOF Linux driver's
IPC4 implementation.
The interfaces are renamed to refer to "vendor" instead of "platform",
to avoid any confusion with the platform layer with the new
implementation.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Switch to Zephyr native drivers and timer domain. This
includes:
1) Switching all imx8ulp topologies to timer domain.
2) Disabling Zephyr DMA domain
3) Various interrupt-related fixes via Kconfig-related
ifdef logic.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
This commit includes all necessary changes for switching
to timer domain and Zephyr native drivers on imx8 and imx8x.
This consists of:
1) Switching all imx8 topologies to timer domain.
2) Disabling Zephyr DMA domain
3) Various interrupt-related fixes via Kconfig-related
ifdef logic.
This commit includes all necessary changes for switching
to native Zephyr drivers on imx8/imx8x.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Add nodes for the following IPs: SAI, EDMA and ESAI. Also,
add node for HOST_DMA. These are all required for switching
to Zephyr native drivers.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Switch to using Zephyr logging on imx8 and imx8x to
prepare for using native Zephyr drivers.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Increase Debug Window (Memory window 2) size by one slot (4096 bytes).
The reason for this change is making space for telemetry functionality.
Signed-off-by: Tobiasz Dryjanski <tobiaszx.dryjanski@intel.com>
This commit adds an overlay enabling kernel traces from
Zephyr.
Those traces may be read on the host side from memory window
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
Enables extraction and injection probes for LNL platform.
NOTE: this commit does NOT enable probe log backend.
Signed-off-by: Grzegorz Bernat <grzegorzx.bernat@intel.com>
Contains the following squashed SOF commits:
nxp: imx8ulp: change SOC name to MIMX8UD7
zephyr: CMakeLists.txt use new `CONFIG_SOC_C` for 8ULP
cmake: update configs for NXP ADSP
and the following Zephyr patches affecting SOF:
951763939034 nxp: imx8ulp: change SOC name to MIMX8UD7
b8214b673970 dts: xtensa: nxp_imx8: add SAI1 node
a0e32f07ef76 dts: intel_adsp: ace: update host dma copy alignment
3fde2c50c6ef tracing: add intel ADSP memory window backend
6b9d01f995c7 intel_adsp/ace: power: No pending transaction before power gate
6ea749de5283 arch: rename arch_start_cpu() to arch_cpu_start()
b69d2486fee6 kernel: rename Z_KERNEL_STACK_BUFFER to K_KERNEL_STACK_BUFFER
1f55be8b42df nxp: imx8: change CONFIG_SOC_<name> to match the value
688fbb53aeb2 intel_adsp: ace: Fix sparse error
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Starting with this commit, i.MX93 now uses the timer domain
in conjunction with the Zephyr native drivers.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
This commit introduces the necessary changes to the overlay
and configuration files required for enabling the Zephyr native
SAI, EDMA and HOST DMA drivers on i.MX93.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
The DRC component was not included to build. This change
avoids error and DSP panic in topology load.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Disable CONFIG_WINSTREAM_CONSOLE in all Intel configs that enable SOF
mtrace for logging. Also disable CONFIG_LOG_BACKEND_ADSP that uses
winstream as backend. No need to have two memory window based logging
backends enabled at the same time.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Convert the smart-amp-test in its IPC4 version to a loadable LLEXT
module. Use an overlay configuration to select between monolithic and
modular builds.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Add support for loadable modules, built for dynamic linking with
Zephyr's LLEXT API.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Switch back to main Zephyr repository and commit f9f44b6dcdd.
This includes following squashed SOF commits that are
needed to adapt to HWMv2 changes in Zephyr:
zephyr: app: scripts: intel_adsp: change board names to HWMv2
zephyr: sof: update board name for HWMv2
zephyr: intel_adsp: Change ACE SoC name to HWMv2
app: boards: imx93: updates for zephyr hwmv2
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Zephyr commit b985442829dd ("dts: mimx93_evk_a55: avoid conflict
with Ethos-U NPU reserved memory") changes SRAM0's address to
0xd0000000. This breaks the i.MX93 SOF build because the SRAM0
node is no longer deleted so west build complains about having
2 SRAM0 nodes with different addresses.
To fix this, update the deleted node's base address.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
CONFIG_LOG and CONFIG_LOG_MODE_DEFERRED are already defined in the
common prj.conf, no need to re-define them additionally in
architecture-specific configurations.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
DTS codec targets the integration on sof-mtl-rt5650-dts.tplg. The
firmware build config should not set COMP_STUBS. At the same time the
config GOOGLE_RTC_PROCESSING_MOCK should be enabled as since its
libraries are still WIP.
Signed-off-by: Pin-chih Lin <johnylin@google.com>
The purpose of CONFIG_DMA_DW_SUSPEND_DRAIN is to empty the FIFO before
disabling the channel by draining it.
Since the peripheral is disabled before the DMA
(CONFIG_COMP_DAI_STOP_TRIGGER_ORDER_REVERSE is not selected), the DMA will
not be able to do that causing drain timeout.
The stop is used in two cases:
Stream stop:
the content of the FIFO does not matter as we stop the stream.
Pause/resume:
On pause the DMA is suspended (DW_CFGL_SUSPEND bit set)
On resume the DMA is stopped, re-configured and then started again instead
of resuming
The peripheral is started after the DMA stop and start.
Leftover audio data might cause audio glitch on resume, it is probably
better to disable the draining.
Note: if we want to have draining enabled we need to select the
CONFIG_COMP_DAI_STOP_TRIGGER_ORDER_REVERSE at the same time to force the
DMA to be stopped before the DAI.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
This reverts 8f6018057b ("app: enable OUTPUT_DISASSEMBLY for Zephyr
builds")
The disassembly is useful in some contexts but can't be parallelized and
takes an enormous amount of time. On my system OUTPUT_DISASSEMBLY
almost doubles the compilation time!
Quoting Zephyr commit cc5763344709:
> This on-by-default option takes the majority of "link" time. If people
> need the disassembly, they can turn it on.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This patch enables clock gating in configurations of a ace platforms.
With CONFIG_ADSP_IDLE_CLOCK_GATING enabled clock gating is always
enabled during WAITI.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
- This test has failed on MTL since it was enabled. Running tests that
we systematically ignore the failure of is much worse than not running
them because it provides a false impression of quality.
- This can cause DSP panics as seen in
https://github.com/thesofproject/sof/pull/8621
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Add a ZTEST test-suite to run SOF boot-time self-tests at the time of
the first FW_GEN_MSG IPC.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
This patch adds DTS_CODEC for IPC4 Intel platform builds.
Since EQ IIR + DTS is the combination we use to support customer, adding
EQ IIR here to ensure it's enabled.
Signed-off-by: Joe Cheng <joe.cheng@xperi.com>
This commit is needed because the current Linux kernel
version used in our internal testing doesn't
contain the patches that enable MU2's power.
As such, to avoid failures in the internal tests,
disable the CCM and LPUART2 IPs.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Removes the misplaced code in smart_amp.c for the fix, then
re-enables CONFIG_COMP_SMART_AMP on building stub images.
Signed-off-by: Pin-chih Lin <johnylin@google.com>
Fixes commit deed9a8808 ("scripts: fuzz: add support for build and
overlays")
The main issue was the way fuzz.sh was trying to parse the overlay
file. Drop that and just pass it as is to `west` and `cmake` instead,
they know what to do with it.
Also:
- Fix invalid syntax in stub_build_all_ipc4.conf
- Make fuzz.sh shellcheck-clean again. Always use shellcheck.
- Temporarily disable `CONFIG_COMP_SMART_AMP` in
stub_build_all_ipc3.conf because `smart_amp.c` does not compile (in
any configuration)
```
sof/src/audio/smart_amp/smart_amp.c:748:9: error:
no member named 'in_channels' in 'struct smart_amp_data'
sad->in_channels = audio_stream_get_channels(&source_buffer->stream);
```
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Addition of SRC Lite module,
which only supports a subset of conversions
supported by the SRC module.
Purpose of SRC Lite module is memory optimization.
Code of SRC Lite is drastically reduced and requires
significantly less memory. When needed one of
defined conversions, driver can choose SRC Lite
module instead of SRC module to optimize memory utilization.
48 -> 16kHz
44.1 -> 16 kHz
32 -> 16 kHz
44.1 -> 48
Signed-off-by: Fabiola Kwasowiec <fabiola.kwasowiec@intel.com>
KD topology tests fail on LNL due to insufficient size of
heap memory. During creation of KD topologies with
4ch audio format, FW fails on memory allocation.
The patch increases HEAPMEM size.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Guennadi Liakhovetski