Updates Zephyr to current top: e4fcb32451c587a3e4ba7f8bf3fc602b16f9652b.
This is to enable ALH multi-gateway feature. The required Zephyr commit
for Intel ADSP MTL is:
https://github.com/zephyrproject-rtos/zephyr/pull/53066
Signed-off-by: Serhiy Katsyuba <serhiy.katsyuba@intel.com>
upgrade rimage to
ba8534bb23ba8534bb23 Fix bitmap according to the IMR type
f3eef3cfb6 Fix IMR type parsing
bdba8259fe Add a command line option to set an Intel-specific PV bit
1c48208850 config: tgl-cavs: add smart amp test module config
082b6261c9 config: Add mt8188.toml
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
Fix only affects ALH multi-gateway feature (mux/demux routines). Adds
check for free space in buffer(s) before copying there.
Signed-off-by: Serhiy Katsyuba <serhiy.katsyuba@intel.com>
This reverts commit 8d166a432f.
This restores working DMIC functionality on Windows platform broken
by #6668.
ATTENTION: This will break DMIC1 (DMIC with DAI index 1) functionality
on Linux platform, DMIC0 should still work fine!
Non working DMIC1 should be fixed on Linux driver side, not this firmware.
Signed-off-by: Serhiy Katsyuba <serhiy.katsyuba@intel.com>
Add error check in dai_get_hw_params() for the case where
dai_config_get() returns an error.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
To test whether CMake configuration can be skipped, look for either a
ninja.build or Makefile.
An existing build directory is NOT proof that CMake configuration
succeeded. When CMake configuration failed, trying to build again fails
with a super confusing "Makefile not found" error message.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
The ADL integration was botched with missing topologies and errors in
topology names in the kernel.
Link: https://github.com/thesofproject/linux/issues/4111
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Check max block count supported by DMA using new Zephyr API
This will allow to prepare a correct config regardless of
specific DMA capabilities
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
This saves a lot of scrolling in the next, most popular build step.
Missed in previous commit 52223eba2d (".github/zephyr: docker pull in
a separate step")
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Change some log level from info to dbg, those changed place are
not reporting errors, just information, so no risk and can be change
back when debugging.
From performance perspective, before and after:
Before:[11.86] <inf> ll_schedule: ll timer avg 2329, max 2887, overruns 0
after: [11.52] <inf> ll_schedule: ll timer avg 2226, max 2789, overruns 0
Signed-off-by: Baofeng Tian <baofeng.tian@intel.com>
Linker fails to link iir_df2t() function when COMP_CROSSOVER is
enabled. Need to select MATH_IIR_DF2T in Kconfig to build the
iir_df2t() function as well.
Signed-off-by: Brent Lu <brent.lu@intel.com>
From
https://github.com/actions/upload-artifact#uploading-to-the-same-artifact
> Warning: Be careful when uploading to the same artifact via multiple
> jobs as artifacts may become corrupted.
Fix bug where IPC3 and IPC4 builds were randomly overwriting each
other and the same bug with different Zephyr revisions.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
- Remove Travis badge (about time!)
- Remove badge that shows the status of the last, random PR that was
submitted.
- Add status of the new Daily Actions as recently implemented by Andrey.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Building on Windows generates CRLF text files. Standardize checksums to
LF files.
As usual, files in the build directory are left untouched.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Fixes pylint warning "E1135 (unsupported-membership-test)". Not sure
this warning is valid because the code worked anyway but it does not
hurt.
Fixes commit bc394916d0 ("xtensa-build-zephyr.py: switch type of
InstFile() names to pathlib")
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Auxiliary data can be added at the end of ssp data blob to enable for
example early clocks for certain platform. Add intel_ssp_aux_config.conf
that includes all possible aux data classes. These can be used inside
ssp hw_configs and will be embedded as tlv data after basic data blob.
Example of using mn_config class inside hw_config:
Object.Base.hw_config."SSP0_0" {
id 0
mclk_freq 38400000
bclk_freq 256000
tdm_slot_width 16
format "DSP_A"
bclk "codec_provider"
fsync "codec_provider"
fsync_freq 16000
Object.Base.mn_config."MN_0" {
m_div 100
n_div 200
}
}
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
The dmic-wov.conf file implements the WOV feature. The connection is
DMIC ------> KPB ------------------------------> host_copier
| ^
| |
|----> micsel ----> wov ------> virtual_widget
The DMIC and KPB is on DAI ppl.
The host_copier is on Host ppl.
The micsel, wov and virtual is on wov ppl.
The connection between host_copier and virtual_widget is a
virtual connection. The virtual_widget doesn't exist in the FW.
Signed-off-by: Libin Yang <libin.yang@intel.com>
wov-detect pipeline contains a micsel component, a wov component
and a virtual component. micsel component accepts 2 channels audio data and
output 1 channel audio data to the wov component. wov's keyword is a clap.
The virtual component is only used by the driver, and the FW will not
know that there is a virtual component in the pipeline. The virtual
component is used to connect the pipeline to a host copier pipeline
as per drivers requirement.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Add the kpb component support. kpb component is used to transfer
the data to the proper pipeline based on the WOV component events.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Add the audio channel selection component support.
In case 1 output channel is selected, the component provides
the selected channel on output. In case 2 or 4 channels are selected on
output, the component works in a passthrough mode.
Signed-off-by: Libin Yang <libin.yang@intel.com>
The token payload_with_output_fmt is process module specific,
so set it as a process module token.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Fix address space conflicts caused by bf7aa04890 ("mixout: Convert
component to use the module adapter")
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Fix address space mismatch, caused by 133eecb132 ("module_adapter: Add
APIs for coherent module source info access").
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Allocating objects, intended for use with the coherent API must use
specific flags and align allocation size on a cache-line size
boundary. To rid users of these details integrate allocation and
freeing into coherent_init*() and coherent_free*() respectively.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
This patch fixes D3 issue - now platform enters and wakes up from
D3 correctly on first iteration. This had been achieved using Zephyr
cpu function call that redirects D3 flow to power down assembly code
sending IPC response to host just before powering down.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Zepych update: total of 73 commits.
Changes include adding power domains to DMA interfaces and allowing to
skip context save during d3.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Preventing d0i3 state during IPC processing in case if a host previously
allowed for power state transitions. Transition can occur only in the
Idle thread and this lock acts as a safeguard in case of the remaining
threads to be non active (e.g. waiting for a semaphore).
The advantage of this solution is that we do not risk bypassing the
prevent. PM state lock (get and put) require that their calls be
balanced. One more put or get will result with hard to debug error. For
example we can end up with permanent prevent on power gating.
Original code introduced here: ae4e037b0
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
The generic module_set_configuration function returns 0 early when
the coming config size is 0. In aspect of DTS module, receiving 0
from module_set_configuration call means either config is obtained
succesfully or no config (size is 0). The present code doesn't
handle the latter case.
This commit handles the case in DTS module by early return.
Signed-off-by: Pin-chih Lin <johnylin@google.com>
In DTS module m4 file, the default control bytes used to have a
12-byte redundant param {0x0000, 0x000c, 0x0000}, the param id is
0 (the first 4-byte).
For DTS SDK version >= 1.0.8, error is reported while getting the
param with id=0.
This commit removes the redundant param from default control bytes.
Signed-off-by: Pin-chih Lin <johnylin@google.com>
Due to allocation failures, or invalid content in dictionary,
"params" entries in "struct proc_ldc_entry" may be NULL.
In print_entry_params(), the NULL entries may be passed
as arguments to fprintf(). While e.g. glibc handles these without
error, this is not guaranteed behaviour and may result in segfault
on some platforms.
Fix the issue by aborting program if allocation fails and
explicitly handling the cases when asprintf_entry_text returns
NULL.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Until now, one dma channel could be stopped multiple times without any
problems. From commit af6d827b64 on zephyr it is required that the start
and stop calls be perfectly balanced.
Zephyr device power manager stores an internal counter. Counter is
incremented if device is used and decremented on device release. In this
case when we call dma_start() and dma_stop().
If dma_stop() is called more times than dma_start() power manager will
reaport a error -EALREADY.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Github allows to store build artifacts for 90 days after the build.
Somebody might want to examine the output of the build, now can
easily download everything that job produces.
In example, compile_commands.json file contains all compilation
commands in verbose that are not visible in the build log
by default.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
Recently new feature had been introduced to Github actions
"concurrency" that allows to define a name for a group of workflows
that will cause old workflow to stop if the new one had been created
and the group name matches.
This improves usage of resources in SOF project by cancelling
running workflows when pushes to pull requests are done frequently
before old jobs are completed.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
Zephyr workflow had been added new build-windows job.
It makes sense to rename old "build" job yo "build-linux"
for consistency.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
During testing of Windows CI workflow on windows-latest turned out
that github action console has issues rendering python
anytree.RenderTree graph with default style of
anytree.render.ContStyle (continuous vertical and horizontal lines).
Tests on local machines in cmd, pwershell and msys shells
proves, that all shells can render the graph (while powershell
does not do this correctly and graph is malformed).
Changing graph style to ASCII resolves the issue with Github actions.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
With IPC4 only two 32-bit values are copied from the host in the
common part, anything beyond that must be copied separately. Those
two values are stored in a global msg_data.msg_in object. Therefore
always when reading from it only up to 8 bytes should be read. In
most cases it is also the case, because the target object has the
same size, but in case of SOF_IPC4_MOD_INIT_INSTANCE this isn't the
case, there special care must be taken.
Also remove a redundant NULL check where NULL cannot appear.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>