Reverts all previosly changed cAVS pipelines from 3 to 2 periods.
Now we have separate buffers for DMA, so there is no need to make
DAI buffers consist of 3 periods. DMA will take care of any internal
hardware requirements.
Signed-off-by: Tomasz Lauda <tomasz.lauda@linux.intel.com>
Switches all pipelines for cAVS platforms to timer scheduling.
This way we limit the number of interrupt levels processed
in the system. Timer, IPC and IDC are already on level 2 and
DMAs are on level 5.
Signed-off-by: Tomasz Lauda <tomasz.lauda@linux.intel.com>
Changes number of SSP and DMIC DAI periods from 2 to 3.
This way we can support both timer and new single DMA
channel scheduling.
Signed-off-by: Tomasz Lauda <tomasz.lauda@linux.intel.com>
Enable setting pcm min and max rate from top level m4 pipeline macro.
This way it is possible to configure the whole pipeline to correct
samplerate range in 1 file. Previously you needed to modify the pipeline
macros where the rate was hardcoded. As the frame count is calculated
from pcm/dai rate and scheduling time the frame count is obsolete.
Introduce pipeline rate parameter to help configuring components with
fixed output rate. We can't deduce this from pcm range since for example
src might accept bigger max rate than the following dai. Even though the
parameter is named "pipeline rate" it essentially means the "final"
output rate to which this pipeline is connected to (dai or other
pipeline). In capture pipelines it means the originating fixed dai rate.
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
This patch renames the macro to pipe-src-volume-playback.m4 for
consistency with other audio processing plus volume
pipelines. The topologies those use it are modified for the new
file name.
A new macro for testbench usage called pipe-src-playback.m4 is
added. It is plain SRC component pipeline without volume. The
volume component in the pipeline caused difficulties with test.
The script tools/test/topology/tplg-build.sh will use the
pipeline to create test topology for SRC component.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
remove the HDA_DAI_CONFIG macro and reuse the DAI_CONFIG
macro with type HDA. This will ensure the hw_config
section gets added for HDA dai's as well.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
This patch adds 50 kHz into SRC generator script for std and tiny
profiles. The src generator script is cleaned up and the default
conversion matrix is moved into caller script for easier maintenance.
The plots appearance is improved and the generated coefficients code
look is improved to pass the git pre- and post-commit script
requirements.
The SRC test bench scripts are updated for changed locations. A SRC
playback topology is used for test bench and real device usage.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Tomasz Lauda