Switch back to main Zephyr repository and commit f9f44b6dcdd.
This includes following squashed SOF commits that are
needed to adapt to HWMv2 changes in Zephyr:
zephyr: app: scripts: intel_adsp: change board names to HWMv2
zephyr: sof: update board name for HWMv2
zephyr: intel_adsp: Change ACE SoC name to HWMv2
app: boards: imx93: updates for zephyr hwmv2
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Zephyr commit b985442829dd ("dts: mimx93_evk_a55: avoid conflict
with Ethos-U NPU reserved memory") changes SRAM0's address to
0xd0000000. This breaks the i.MX93 SOF build because the SRAM0
node is no longer deleted so west build complains about having
2 SRAM0 nodes with different addresses.
To fix this, update the deleted node's base address.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
CONFIG_LOG and CONFIG_LOG_MODE_DEFERRED are already defined in the
common prj.conf, no need to re-define them additionally in
architecture-specific configurations.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
The purpose of CONFIG_DMA_DW_SUSPEND_DRAIN is to empty the FIFO before
disabling the channel by draining it.
Since the peripheral is disabled before the DMA
(CONFIG_COMP_DAI_STOP_TRIGGER_ORDER_REVERSE is not selected), the DMA will
not be able to do that causing drain timeout.
The stop is used in two cases:
Stream stop:
the content of the FIFO does not matter as we stop the stream.
Pause/resume:
On pause the DMA is suspended (DW_CFGL_SUSPEND bit set)
On resume the DMA is stopped, re-configured and then started again instead
of resuming
The peripheral is started after the DMA stop and start.
Leftover audio data might cause audio glitch on resume, it is probably
better to disable the draining.
Note: if we want to have draining enabled we need to select the
CONFIG_COMP_DAI_STOP_TRIGGER_ORDER_REVERSE at the same time to force the
DMA to be stopped before the DAI.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
This patch enables clock gating in configurations of a ace platforms.
With CONFIG_ADSP_IDLE_CLOCK_GATING enabled clock gating is always
enabled during WAITI.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
This commit is needed because the current Linux kernel
version used in our internal testing doesn't
contain the patches that enable MU2's power.
As such, to avoid failures in the internal tests,
disable the CCM and LPUART2 IPs.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Addition of SRC Lite module,
which only supports a subset of conversions
supported by the SRC module.
Purpose of SRC Lite module is memory optimization.
Code of SRC Lite is drastically reduced and requires
significantly less memory. When needed one of
defined conversions, driver can choose SRC Lite
module instead of SRC module to optimize memory utilization.
48 -> 16kHz
44.1 -> 16 kHz
32 -> 16 kHz
44.1 -> 48
Signed-off-by: Fabiola Kwasowiec <fabiola.kwasowiec@intel.com>
KD topology tests fail on LNL due to insufficient size of
heap memory. During creation of KD topologies with
4ch audio format, FW fails on memory allocation.
The patch increases HEAPMEM size.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
The LNL board does not use DMA_DW driver, so the board
file should not set any build options specific to that
driver.
This fixes build warning:
--cut--
warning: DMA_DW_SUSPEND_DRAIN (defined at
drivers/dma/Kconfig.dw_common:27, drivers/dma/Kconfig.dw_common:27,
drivers/dma/Kconfig.dw_common:27) was assigned the value 'y' but got the
value 'n'.
---cut--
Link: https://github.com/thesofproject/sof/issues/8356
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Logging with probes was not implemented. This implements
ipc that enables logging with probe configuration.
Signed-off-by: Jakub Dabek <jakub.dabek@intel.com>
Now that Intel cAVS2.5 has been migrated to use native Zephyr
drivers, we have no need to keep the Intel specific XTOS
drivers in the tree anymore.
Adjust board configuration files to not refer to removed
Kconfig options.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
The IPC3 build is no longer supported for Intel cAVS2.5 target,
so move the config overlay definitions as-is to the main
board config file.
To smoothen the transition, keep an empty IPC4 overlay file
in the tree to allow developers to update build scripts.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Enables extraction and injection probes for MTL platform.
NOTE: this commit does NOT enable probe log backend.
Signed-off-by: Serhiy Katsyuba <serhiy.katsyuba@intel.com>
Zephyr turns on by default CONFIG_PM_DEVICE_RUNTIME_EXCLUSIVE option
what causes Devices using Zephyr Device System Power Manager to
be ignored during SoC power transition. Disabled this option so we
can use default Zephyr kernel behavior to shut down Devices.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
We plan to get rid of mimx93_evk_a55_sof board and use the
generic mimx93_evk_a55 board + overlays.
This patch adds the config fragment to enable mimx93_evk_a55 board for
SOF.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
We will use SOF app with default mimx93_evk_a55 board on top
of which will add necessary adaptations.
e.g we will define SOF required memory areas in the overlay
and will get rid of mimx93_evk_a55_sof board.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
The config CONFIG_LOG_FUNC_NAME_PREFIX_xxx is only
enabled for ACE platforms and INF log level, and the
timestamp used is different on TGL and MTL, which
is not quite consistent.
This patch make sure the log format is consistent
among platforms and log levels.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
We need to enable CONFIG_DEBUG_COREDUMP_MEMORY_DUMP_MIN according to
comments in coredump_core.c: When dumping minimum information, the
current thread struct and stack need to be dumped so debugger can
examine them.
Signed-off-by: Rander Wang <rander.wang@intel.com>
some platforms don't use Zephyr, therefore they can't
use DP scheduler. Add a config option
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
Remove all support for cAVS 2.0 platformsm including Ice Lake and
Jasper Lake, they aren't supported any more.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Remove all support for cAVS 1.8 platformsm including Cannon Lake,
Comet Lake, Whiskey Lake and Coffee Lake, they aren't supported
any more.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Remove all support for cAVS 1.5 platformsm including Apollo Lake,
Sky Lake, Kaby Lake, Broxton and Gemini Lake, they aren't supported
any more.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Kai Vehmanen