Enable setting pcm min and max rate from top level m4 pipeline macro.
This way it is possible to configure the whole pipeline to correct
samplerate range in 1 file. Previously you needed to modify the pipeline
macros where the rate was hardcoded. As the frame count is calculated
from pcm/dai rate and scheduling time the frame count is obsolete.
Introduce pipeline rate parameter to help configuring components with
fixed output rate. We can't deduce this from pcm range since for example
src might accept bigger max rate than the following dai. Even though the
parameter is named "pipeline rate" it essentially means the "final"
output rate to which this pipeline is connected to (dai or other
pipeline). In capture pipelines it means the originating fixed dai rate.
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
to align with machine driver
The physical link iDisp1 ID for HDMI should be changed to 3,4,5
to align with machine driver. ID 2 is defined for DMIC16k.
Signed-off-by: Zhang Keqiao <keqiao.zhang@linux.intel.com>
This patch adds to all DMIC related topologies the new token
SOF_TKN_INTEL_DMIC_UNMUTE_RAMP_TIME_MS. The value is set to 400
to correspond to 400 milliseconds long unmute ramp time. The
topology defined unmute will override the firmware internal
hard coded value if it is set in topology.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Demux topology doesn't have format conversions so playback files need to
be converted to S24 or S32 format. As this is a bit cumbersome add
volume component to demux topology to enable standard 16 bit playback
from alsa. Also change the demux capture pipe PCM format range.
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
This topology will add a capture branch back from playback pipeline's
mux component. It can be used for example as a echo cancellation
reference signal.
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
Jaska Uimonen