Zephyr uses MP_MAX_NUM_CPUS internally to represent the
number of cores available and consequently to allocate
resources. It is even expected, and checked through assert,
that these two symbols have the same value. Use different
value can lead to an undesired behavior, so lets use
MP_MAX_NUM_CPUS.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Follow the k_sys_fatal_error_handler implementation in fatal.c in
zephyr framework. Without this halt, our k_sys_fatal_error_handler
will be called copules time and result to many useless IPC messages
to host.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Send panic notification message to host when panic happens. The panic
detail is built by Zephyr framework and included in debug memory window.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Co-developed-by: Rander Wang <rander.wang@intel.com>
For the functions platform_interrupt_clear and platform_interrupt_set,
the existing definitions based on arch_interrupt_* do not compile with
the xt-clang 2023 toolchain for imx. Use the Zephyr wrapper
implementations for those for now.
Signed-off-by: Paul Olaru <paul.olaru@nxp.com>
Due to the fact that on i.MX93 the host will initialize the
SOF_IPC_FW_READY sequence there's no need to call
platform_boot_complete() at the end of start_complete(). This
will be handled in the IPC3 handler.
This commit makes sure that aforementioned scenario won't
happen for i.MX93 while keeping the flow constant for the
other platforms.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
This commit removes all occurrences of the soc.h header file
since this is not used. This also fixes build problem on i.MX93
caused by the fact that i.MX93 doesn't have a soc.h.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Add Asynchronous Messaging Service. This can be used to communicate between
modules.
Asynchronous Messages are one-way messages from one producer to one or
multiple registered consumers. Messages between modules on different
cores are sent through IDC. All inter-core communication must be proxied
by the main core.
Signed-off-by: Krzysztof Frydryk <krzysztofx.frydryk@intel.com>
The purpose of this commit is to separate the XTOS-specifc
code from the Zephyr-specifc code found in sof/drivers/idc.h.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
All SOF modules are now initialised using native Zephyr APIs, no need
any more in a dedicated ELF section. TODO: remove from linker scripts
once this is merged.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register probe with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register waves with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register dts with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register google-hotword with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register tdfb with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register up-down-mixer with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register rtnr with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register igo-nr with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register google-rtc with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register multiband-drc with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register drc with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register crossover with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register aria with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register passthrough with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register cadence with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register copier with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register basefw with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register mux with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register dcblock with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register asrc with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register smart-amp with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register kpb with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register host with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register keyword with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register eq-iir with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register eq-fir with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register tone with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register switch with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register selector with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register chain-dma with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register src with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register dai with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register mixer, mixin and mixout with the
Zephyr initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use SOF_MODULE_INIT() to register volume with the Zephyr
initialisation framework.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Zephyr has an elaborate subsystem initialisation framework. Use it
for primary_core_init() instead of calling it from main(). This
prepares for a migration of module initialisation to that framework
too.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Hardware HDA chain require manager for controlling multiple streams tasks.
Enable support with LL task and DMA mandatory logic.
Signed-off-by: Piotr Makaruk <piotr.makaruk@intel.com>
Replace the comp_drv ops for the mixin component to use the
module_adapter interface. The trigger and get_attribute ops are replaced
with the module_adapter ops which do the exact same thing. The base_cfg
field from struct mixin_data is removed as it is replaced with the
base_cfg in struct module_config and all users have been updated.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Convert the mixout module to use the module adapter. The
bind/unbind/get_attribute ops in the mixout module have been moved to the
module_adapter ops and is functionally the same as with the comp_drv
ops.
The struct mixout_data struct has been simplified to contain 2 fields as
the source info table has been moved to struct processing_module and
rename the consumed_yet_not_produced_frames field in struct mixout_data
to pending_frames.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
This extends the ideas in CONFIG_LIBRARY=y to implement SOF as an
application for the Zephyr native_posix architecture. These are host
x86 or x86_64 binaries that include a full OS build, which can be used
(via mocked drivers) for testing against host validation environments
like ASAN/MSAN.
The mechanism uses the existing "host" architecture used by
CONFIG_LIBRARY, but adds a new platform layer named "posix", populated
entirely with stubs.
No driver integration is provided in this patch. The resulting
executable builds correctly, but has no devices and won't do anything.
Signed-off-by: Andy Ross <andyross@google.com>
Flavio Ceolin