Move byt/cht platform specific ifelse to platform files.
And byt/cht have codec and nocodec differences, which need to have
PLATFORM-codec and PLATFORM-nocodec files.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reverts all changed media pipelines to again have 4000 ms
scheduling period. Change was introduced in order to workaround
firmware scheduling limitation, but with pipelines scheduled
separately we can revert it back.
Signed-off-by: Tomasz Lauda <tomasz.lauda@linux.intel.com>
Fixes media pipeline period for nocodec byt and cht topologies.
Now codec and nocodec topologies are aligned in regards to pipe
configurations.
Signed-off-by: Tomasz Lauda <tomasz.lauda@linux.intel.com>
Byt doesn't have enough memory to handle buffer size
increase from updating media pipeline's pcm_max_rate to
96kHz. So limit it to 48khz.
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
Enable setting pcm min and max rate from top level m4 pipeline macro.
This way it is possible to configure the whole pipeline to correct
samplerate range in 1 file. Previously you needed to modify the pipeline
macros where the rate was hardcoded. As the frame count is calculated
from pcm/dai rate and scheduling time the frame count is obsolete.
Introduce pipeline rate parameter to help configuring components with
fixed output rate. We can't deduce this from pcm range since for example
src might accept bigger max rate than the following dai. Even though the
parameter is named "pipeline rate" it essentially means the "final"
output rate to which this pipeline is connected to (dai or other
pipeline). In capture pipelines it means the originating fixed dai rate.
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
This patch does the following:
1. Modify pipe-pcm-media to use the SCHED_COMP macro to set the
scheduling comp for the media pipeline.
2. Add low-latency and media pipelines to the apl nocodec
and apl pcm512x.
3. For the byt codec and nocodec topologies, modify the
PIPELINE_PCM_ADD macro to pass the scheduling comp name
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Add quirks parameter in SSP_CONFIG_DATA(). Enable LBM in dupulex pipelines
by setting quirks as SOF_DAI_INTEL_SSP_QUIRK_LBM 64(1<<6). SSPx.IN port get
PCM data from SSPx.OUT. Note both mclk and quirks are optional parameter.
When quirks set, mclk should have value or initialize to default value
which is 0.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Merge the 2 m4 files and use the PLATFORM defined during
compilation to generate the appropriate topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Nocodec machine driver adds all the BE dai links with
ID's linearly incrementing from 0. So the link ID
should match with the SSP dai index.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
This was never properly supported and generates errors. Will re-add when it
actually works
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>