This patch updates the SRC to run with the updated test topologies
set. The script is also cleaned up a bit.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch updates the tplg-build.sh script by omitting DMIC capture
test topologies generation, tone topolgies generation due to no
use and no maintenance. They can be fixed later.
The all DAI permutations are generated only for volume pipeline. The
src is removed. Instead a new algorithms topologies generation loop
is added for UP2 (APL) compatible topologies. The algorithms are
ASRC, FIR, IIR, and SRC.
The test-all, capture, playback macros are updated to use
PIPELINE_PCM_ADD and set up DAI for SCHEDULE_TIME_DOMAIN_TIMER. The
duplication of TEST_DAI_PORT in macro call is replaced by 0 to
prevent topology load fail on device.
The test-equalizer-playback-ssp.m4 is removed as obsolete.
Pipelines are added for FIR and IIR playback and capture. SRC playback
pipeline is improved by making tokens instance specific. The SRC
capture pipeline macro is only cosmetically improved.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch adds all the topology files related parts and two complete
test topologies to test ASRC playback and capture with APL platform.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Chirp test signals confused the test signal begin marker position
seek and caused false test fails. The test stimulus may produce
stronger cross correlation level than the actual marker. Also
the check omitted that the cross correlation max could be negative
so the test was changed into power domain and use first/last
cross correlation peak above threshold as test begin/end position.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Gain of SRC varies by 1 dB due built-in attenuation in the filter
coefficients. It was added to avoid signal overshoots to distort
with some challenging music content. When a converter consists of
two filters in series the attenuation duplicates. While SRC is
missing the gain compensation the test criteria needs to be relaxed.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch updates the locations of "make install" libraries default
install locations into shell script to run SRC test cases. The script
also now prints the used LD_LIBRARY path to ease setting up code
debugging.
The segfault of testbench executable is fixed by returning a valid
pointer reference instead of a NULL from test dummy function
arch_schedulers_get(). The rest of testbench version of schedule.c
was also updated to be like the current real version module.
Finally in the testbench.c main the file names string pointers are
initilizated to null as well as the word length parameter to avoid
a segfault if executable is started without command line arguments
to see the usage help text.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch adds a shell script sof_test_perf.sh that measures
gain, frequency response, and total harmonic distortion plus
noise for a remote device.
Matlab or Octave is needed. The shell script launches by default
Octave to process the signal generation and test results analysis
scripts.
The remote device must be set to be accessible by ssh without
passwords. An external high quality USB sound card is recommended
as analog interface to connect to test device's analog interface.
The configuration file sof_test_perf_config.m must be edited for
the remote device's user account, audio device, audio format, and
capture sound card audio device, and audio format.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Enable setting pcm min and max rate from top level m4 pipeline macro.
This way it is possible to configure the whole pipeline to correct
samplerate range in 1 file. Previously you needed to modify the pipeline
macros where the rate was hardcoded. As the frame count is calculated
from pcm/dai rate and scheduling time the frame count is obsolete.
Introduce pipeline rate parameter to help configuring components with
fixed output rate. We can't deduce this from pcm range since for example
src might accept bigger max rate than the following dai. Even though the
parameter is named "pipeline rate" it essentially means the "final"
output rate to which this pipeline is connected to (dai or other
pipeline). In capture pipelines it means the originating fixed dai rate.
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
This patch adds to all DMIC related topologies the new token
SOF_TKN_INTEL_DMIC_UNMUTE_RAMP_TIME_MS. The value is set to 400
to correspond to 400 milliseconds long unmute ramp time. The
topology defined unmute will override the firmware internal
hard coded value if it is set in topology.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
The tests created lot of unnecessary fails when testing with S16_LE
format. The test pass criteria for THD+N, DR is relaxed for tests
with 16 bit data.
Since the gain of SRC conversions was lowered to -1 dB the test
case for gain need to be updated. The gain is retrieved from
src_param() function. An exception is added for FS1 == FS2 case
when data is passed through. In that case expected gain is 0 dB.
The frequency response measurement grid does not necessarily cover
the exact upper frequency of pass-band. Therefore the min. upper
passband frequency is scaled by 0.99. This avoids measurement
technique related fails in test.
The chirp spectra test case was updated to use for RMS level criteria
for testing the level of signal. The peak level was less robust and
caused unnecessary test fails.
The option to not open plot windows during test is set. It improves
speed of test and avoids display clutter.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch updates the testbench binary path into current default
install location when built with scripts/host-build-all.sh.
The path to test topologies is updated also.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Add one argument in test-tone-playback.m4 to fix the building error
of insufficient PIPELINE_ADD arguments.
Signed-off-by: Xun Zhang <xun2.zhang@intel.com>
"Formate" and "format" are two different words, in this case it's
"format" that is meant.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
This patch adds 50 kHz into SRC generator script for std and tiny
profiles. The src generator script is cleaned up and the default
conversion matrix is moved into caller script for easier maintenance.
The plots appearance is improved and the generated coefficients code
look is improved to pass the git pre- and post-commit script
requirements.
The SRC test bench scripts are updated for changed locations. A SRC
playback topology is used for test bench and real device usage.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Seppo Ingalsuo