When built with Zephyr, SOF ideally should be a fully platform-
agnostic application. All platform-specific code should reside in
Zephyr itself, including core architecture and platform
infrastructures and drivers. To prepare for this transition we add a
generic SOF-Zephyr platform. It is based on the current Tiger Lake
architecture and should be usable for cAVS 2.5 and newer systems.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Two directories for cAVS 2.0 and 2.5 in Zephyr CMakeLists.txt don't
exist. They're safely ignored, but remove them to avoid confusion.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Discovered the hard way that the Zephyr build assumes sof-logger is
always up to date when present. It's not clear from cmake's
ExternalProject documentation why that is the case. In any case
BUILD_ALWAYS fixes the issue and takes very little time because it does
not rebuild sof-logger from scratch. BUILD_ALWAYS is already used for
XTOS.
Fixes commit f6c71c21d0 ("zephyr/CMakeLists.txt: build smex and
sof-logger")
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
COMPILER_WORKAROUND_CACHE_ATTR is also enabled on Zephyr,
but the cache_attr.c file is not compiled since is not added in
zephyr_library_sources.
Without this fix, we get:
cache.h:110: undefined reference to `glb_is_cached'
I've added the file for all platforms since cache_attr.c is generic.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
On i.MX the DMA interrupts are routed via IRQ_STEER.
In order for this to work we need to:
- make any second level interrupts handling go
through interrupt-irqsteer.c;
- use first level interrupt handling from
wrapper.c.
TODO: Implement a driver for the IRQ_STEER in Zephyr,
to replace the legacy code (interrupt-irqsteer.c).
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
For now, zephyr_ll is limited to timer_domain.
For i.MX we use dma_domain, so keep the ll_schedule
from SOF, until we extend the zephyr_ll for DMA_IRQ.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Remove zephyr_ll.c from mandatory files for building
SOF with Zephyr and include it where necessary: in CAVS 1.5,
CAVS 1.8, CAVS 2.0 and CAVS 2.5.
While here, add ll_schedule for BROADWELL and BAYTRAIL
when building SOF with Zephyr.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
This patch adds to DMIC driver support for binary data based HW
registers setup. The driver mode is selected in Kconfig.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
This patch moves the run-time decimation factors search and filter
coefficients scaling code to separate module as preparation to add
more functionality to the driver. There are no changes to
functionality.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
In preparation for more functionality the module is moved
to own directory similarly as other DAI drivers.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Switch SOF under Zephyr to use a simplified native low-latency
scheduler implementation.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Prepare for supporting new IPC major versions by partitioning
IPC code into directories.
This is a code move only, no code changes except Makefiles.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Currently the DAI HW configuration is tightly bound to the IPC major
version and IPC structures. Provide a mechanism whereby different
IPC data structures can be passed for DAI configuration.
This change does the following changes.
1) Pass a common ipc_config_dai structure to all dai config call. This
allows retention of common logic that uses this common data.
2) Provide a IPC specific private data pointer to the dai config that
can be interpreted by the DAI as custom data. Today this is the
existing IPC, but it could also support an NHLT binary register blob in
the future.
3) Splits ipc specific code out of src/audio/dai.c and into
src/ipc/ipc3-dai.c.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
timer_domain.c contains a lot of Zephyr- and XTOS-specific code and
relatively little common code. Aplit it into two files instead of
using a large number of #ifdef instructions.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Commit b3f195e92a ("zephyr: fix build with recent file name
changes.") partially fixed a regression, caused by 4e436f8570
("ipc: split out ipc functions into separate files.")
partially. This patch completes the fix.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
When CONFIG_LIBRARY is enabled, but the architecture that
exists in sof is not enabled, the "PLATFORM" variable in
the zephyr\CMakeLists.txt file is empty, resulting in an
error in the include path.
The modification here is to get the correct include
path under this condition
Signed-off-by: yxh <yangxiaohuamail@gmail.com>
Split the pipeline logic up into stream, params, graph, scheduling and xrun
so that it easier to follow and understand. This is to help on the TSC work
to integrate the codec adaptor into core logic.
This PR is all mechanical code moves. There are NO functional changes. Some
function that were static are now public.
Followup patches will add more documentation updates alongside.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
This reverts commit f4c9c28bc5.
This is no longer needed as we removed local copy of rimage from
zephyr/ext.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add some files from src/platform/library/ to generic arch
builds with Zephyr.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Use a correct path to the cAVS memory.h header, build cAVS LPS
only when the respective Kconfig option is selected.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
When building for unsupported architectures under Zephyr set ARCH
to "host" to use generic headers.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Files under src/trace should only be built if CONFIG_TRACE is selected
in configuration.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Audio component samples have been moved to a new location, fix Zephyr
builds to account for it.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
This information is already provided by extended manifest,
so there is no need to double it in runtime code.
It allows to save 28 bytes from .DATA and 128 bytes from .TEXT
for cnl platform.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
This information is already provided by extended manifest,
so there is no need to double it in runtime code.
It allows to save 92 bytes from .DATA and 128 bytes from .TEXT
for cnl platform.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Two recent commits moved and renamed some of eq-iir and eq-fir files,
without updating zephyr cmake files.
fixes ab4a608198 ("Audio: Move FIR core to math library")
fixes baa43558f6 ("sof: math: move iir_df2t function to src/math")
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
This patch finalises the wrapper to allow LL scheduling of
timer domain audio, EDF sccheduling of IPC, trace re-direction
and kconfig build support.
There are still many items that are WIP and have been marked with
TODO: comments.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Add a wrapper to convert SOF API calls to Zephyr equivalents. This allows
development to continue in parallel with xtos/HAL and Zephyr RTOSes until
parity is reached.
The initlial Zephyr APIs to be used are HAL, boot, IRQs, scheduling and
memory. The wrapper reflects this and will probably grow until feature
parity is reached when it can be deleted (as Zephyr APIs can be used
directly).
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Builds an initial Zephyr SOF audio module. This will be the starting
point for the porting work.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Guennadi Liakhovetski