slimbootloader/Silicon/ElkhartlakePkg/Include/Register/PchRegsSerialIoUart.h

49 lines
1.9 KiB
C

/** @file
Register names for PCH Serial IO UART Controllers
Conventions:
- Register definition format:
Prefix_[GenerationName]_[ComponentName]_SubsystemName_RegisterSpace_RegisterName
- Prefix:
Definitions beginning with "R_" are registers
Definitions beginning with "B_" are bits within registers
Definitions beginning with "V_" are meaningful values within the bits
Definitions beginning with "S_" are register size
Definitions beginning with "N_" are the bit position
- [GenerationName]:
Three letter acronym of the generation is used (e.g. SKL,KBL,CNL etc.).
Register name without GenerationName applies to all generations.
- [ComponentName]:
This field indicates the component name that the register belongs to (e.g. PCH, SA etc.)
Register name without ComponentName applies to all components.
Register that is specific to -H denoted by "_PCH_H_" in component name.
Register that is specific to -LP denoted by "_PCH_LP_" in component name.
- SubsystemName:
This field indicates the subsystem name of the component that the register belongs to
(e.g. PCIE, USB, SATA, GPIO, PMC etc.).
- RegisterSpace:
MEM - MMIO space register of subsystem.
IO - IO space register of subsystem.
PCR - Private configuration register of subsystem.
CFG - PCI configuration space register of subsystem.
- RegisterName:
Full register name.
Copyright (c) 2018 Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#ifndef _PCH_REGS_SERIAL_IO_UART_H_
#define _PCH_REGS_SERIAL_IO_UART_H_
#define R_SERIAL_IO_PCR_GPPRVRW7 0x618
#define B_SERIAL_IO_PCR_GPPRVRW7_UART0_BYTE_ADDR_EN BIT0
#define B_SERIAL_IO_PCR_GPPRVRW7_UART1_BYTE_ADDR_EN BIT1
#define B_SERIAL_IO_PCR_GPPRVRW7_UART2_BYTE_ADDR_EN BIT2
#define R_SERIAL_IO_MEM_PPR_RESETS_8BIT 0x81
#endif // _PCH_REGS_SERIAL_IO_UART_H_