134 lines
4.1 KiB
C
134 lines
4.1 KiB
C
/** @file
|
|
Register names for PCH GPIO
|
|
|
|
Conventions:
|
|
|
|
- Register definition format:
|
|
Prefix_[GenerationName]_[ComponentName]_SubsystemName_RegisterSpace_RegisterName
|
|
- Prefix:
|
|
Definitions beginning with "R_" are registers
|
|
Definitions beginning with "B_" are bits within registers
|
|
Definitions beginning with "V_" are meaningful values within the bits
|
|
Definitions beginning with "S_" are register size
|
|
Definitions beginning with "N_" are the bit position
|
|
- [GenerationName]:
|
|
Three letter acronym of the generation is used (e.g. SKL,KBL,CNL etc.).
|
|
Register name without GenerationName applies to all generations.
|
|
- [ComponentName]:
|
|
This field indicates the component name that the register belongs to (e.g. PCH, SA etc.)
|
|
Register name without ComponentName applies to all components.
|
|
Register that is specific to -H denoted by "_PCH_H_" in component name.
|
|
Register that is specific to -LP denoted by "_PCH_LP_" in component name.
|
|
- SubsystemName:
|
|
This field indicates the subsystem name of the component that the register belongs to
|
|
(e.g. PCIE, USB, SATA, GPIO, PMC etc.).
|
|
- RegisterSpace:
|
|
MEM - MMIO space register of subsystem.
|
|
IO - IO space register of subsystem.
|
|
PCR - Private configuration register of subsystem.
|
|
CFG - PCI configuration space register of subsystem.
|
|
- RegisterName:
|
|
Full register name.
|
|
|
|
Copyright (c) 2013 - 2019, Intel Corporation. All rights reserved.<BR>
|
|
SPDX-License-Identifier: BSD-2-Clause-Patent
|
|
**/
|
|
#ifndef _GPIO_REGS_H_
|
|
#define _GPIO_REGS_H_
|
|
|
|
|
|
//
|
|
// PADCFG register is split into multiple DW registers
|
|
// S_GPIO_PCR_PADCFG refers to number of bytes used by all those registers for one pad
|
|
//
|
|
#define S_GPIO_PCR_PADCFG 0x10
|
|
|
|
|
|
//Pad Reset Config
|
|
#define B_GPIO_PCR_RST_CONF (BIT31 | BIT30)
|
|
#define N_GPIO_PCR_RST_CONF 30
|
|
#define V_GPIO_PCR_RST_CONF_POW_GOOD 0x00
|
|
#define V_GPIO_PCR_RST_CONF_DEEP_RST 0x01
|
|
#define V_GPIO_PCR_RST_CONF_GPIO_RST 0x02
|
|
#define V_GPIO_PCR_RST_CONF_RESUME_RST 0x03 // Only for GPD Group
|
|
|
|
|
|
//RX Raw Overrride to 1
|
|
#define B_GPIO_PCR_RX_RAW1 BIT28
|
|
#define N_GPIO_PCR_RX_RAW1 28
|
|
|
|
|
|
//RX Level/Edge Configuration
|
|
#define B_GPIO_PCR_RX_LVL_EDG (BIT26 | BIT25)
|
|
#define N_GPIO_PCR_RX_LVL_EDG 25
|
|
|
|
//RX Invert
|
|
#define B_GPIO_PCR_RXINV BIT23
|
|
#define N_GPIO_PCR_RXINV 23
|
|
|
|
//GPIO Input Route IOxAPIC
|
|
#define B_GPIO_PCR_RX_APIC_ROUTE BIT20
|
|
|
|
//GPIO Input Route SCI
|
|
#define B_GPIO_PCR_RX_SCI_ROUTE BIT19
|
|
|
|
//GPIO Input Route SMI
|
|
#define B_GPIO_PCR_RX_SMI_ROUTE BIT18
|
|
|
|
//GPIO Input Route NMI
|
|
#define B_GPIO_PCR_RX_NMI_ROUTE BIT17
|
|
#define N_GPIO_PCR_RX_NMI_ROUTE 17
|
|
|
|
//GPIO Pad Mode
|
|
#define B_GPIO_PCR_PAD_MODE (BIT12 | BIT11 | BIT10)
|
|
#define N_GPIO_PCR_PAD_MODE 10
|
|
|
|
//GPIO RX Disable
|
|
#define B_GPIO_PCR_RXDIS BIT9
|
|
|
|
//GPIO TX Disable
|
|
#define B_GPIO_PCR_TXDIS BIT8
|
|
#define N_GPIO_PCR_TXDIS 8
|
|
|
|
//GPIO RX State
|
|
#define B_GPIO_PCR_RX_STATE BIT1
|
|
#define N_GPIO_PCR_RX_STATE 1
|
|
|
|
//GPIO TX State
|
|
#define B_GPIO_PCR_TX_STATE BIT0
|
|
#define N_GPIO_PCR_TX_STATE 0
|
|
|
|
|
|
//Termination
|
|
#define B_GPIO_PCR_TERM (BIT13 | BIT12 | BIT11 | BIT10)
|
|
#define N_GPIO_PCR_TERM 10
|
|
|
|
//Interrupt number
|
|
#define B_GPIO_PCR_INTSEL 0x7F
|
|
|
|
|
|
//
|
|
// GPIO native features pins data
|
|
//
|
|
#define PCH_GPIO_HDA_LINK_NUMBER_OF_PINS 6
|
|
#define PCH_GPIO_HDA_DMIC_NUMBER_OF_PINS 2
|
|
#define PCH_GPIO_HDA_SSP_NUMBER_OF_PINS 4
|
|
#define PCH_GPIO_HDA_SNDW_NUMBER_OF_PINS 2
|
|
#define PCH_GPIO_SMBUS_NUMBER_OF_PINS 2
|
|
#define PCH_GPIO_CPU_GP_NUMBER_OF_PINS 4
|
|
#define PCH_GPIO_DDSP_HPD_NUMBER_OF_PINS 4
|
|
#define PCH_GPIO_DDP_NUMBER_OF_INTERFACES 4
|
|
#define PCH_GPIO_DDP_NUMBER_OF_PINS 2
|
|
#define PCH_GPIO_CNVI_UART_NUMBER_OF_PINS 4
|
|
#define PCH_GPIO_CNVI_SSP_NUMBER_OF_PINS 4
|
|
#define PCH_GPIO_CNVI_BRI_RGI_NUMBER_OF_PINS 4
|
|
|
|
|
|
///
|
|
/// Groups mapped to 2-tier General Purpose Event will all be under
|
|
/// one master GPE_111 (0x6F)
|
|
///
|
|
#define PCH_GPIO_2_TIER_MASTER_GPE_NUMBER 0x6F
|
|
|
|
#endif // _GPIO_REGS_H_
|