The patch gives the platform the configuration capability to only build
required file system into final image.
This helps to have a smaller image for fast boot.
Signed-off-by: Guo Dong <guo.dong@intel.com>
This patch updates firmware update code to get capsule location
information from configuration data instead of searching in all the
available boot media.
Signed-off-by: Raghava Gudla <raghava.gudla@intel.com>
There are 'uninitialized' errors and size exceed error in PAYLOAD
with old gcc versions. This change has been verified with gcc-4.8,
gcc-5, gcc-7 and gcc-8 on Ubuntu 18.04 LTS.
Signed-off-by: Aiden Park <aiden.park@intel.com>
Current code refers hash store as "key store". It is confusing
since there is no key stored in the image at all. Instead, the
public key hash is stored. The patch renames the KeyStore
to HashStore.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
This reverts commit 8cba382774.
The original fix still has the issue on Windows UDK Debugger and
a simpler way can resolve the QEMU specific issue. In UDK debugger
configuration, 'NoAccessLimit = 0' is required for QEMU only.
[Target System]
NoAccessLimit = 0x0
This change has been verified on both Linux and Windows UDK Debuggers
and user guide will include this information.
Change-Id: I09de713d7a9a892230475cbc4aca70b1a5c11b3c
Signed-off-by: Aiden Park <aiden.park@intel.com>
QEMU FSP reports that CAR base is 0x0, but DebugAgent cannot access
the memory space since MEMORY_READY is not set.
In order to disable low memory filtering, simply check CAR space and
then trigger MEMORY_READY.
Change-Id: I9e1703215c95fd64e2a0be3afd001c59f736e81b
Signed-off-by: Aiden Park <aiden.park@intel.com>
In order to support ELF format payload in Stage2, ElfLib is separated
from MultibootLib.
Additionally,
- Load ONLY Executable/Loadable segments
- Keep LoadElfSymtab function for future use
- Mark ELF syms flag as 'not supported' in MultibootInfo
Change-Id: Iec1ca6770ffeff9222b71327216cc6176ea1e925
Signed-off-by: Aiden Park <aiden.park@intel.com>
This patch adds a new shell command `dmesg` to print out the contents of
the boot log buffer.
Signed-off-by: Borgerson, Matthew A <matthew.a.borgerson@intel.com>
Previous USB keyboard console support commit worked fine on APL real
platform, but it has issue on QEMU. This patch further enables USB
keyboard console support for QEMU. A new PcdUsbKeyboardPollingTimeout
is added. It will be used to control the USB keyboard interrupt
transfer polling timeout. For QEMU, it needs a larger number due to
timing issue. As part of it, booting from USB device is also enabled
by this patch. This patch fixes#30.
To test USB keyboard console in QEMU, please first change
CONSOLE_IN _DEVICE_MASK in BoardConfig.py to 3, and then add the
following in the QEMU command line to add XHCI controller and USB KB:
-device qemu-xhci,id=xhci,bus=pcie.0,addr=4 -device usb-kbd,bus=xhci.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
This patch simplifies the GraphicsLib code and adds an abstraction layer
for printing to a virtual "console," through the familier
ConsoleWrite(buffer, len) style function call.
ConsoleWrite can be configured to output to either the serial port, or
the display framebuffer, or both. This primarily enables the command
shell to be used with a display and keyboard.
Signed-off-by: Borgerson, Matthew A <matthew.a.borgerson@intel.com>
Current XHCI library does initialization without checking the
controller PCI class and interface type. It will cause assertion
in late phase if the device is not a real XHCI controller. This
patch added the class and interface type check for XHCI controller.
Also more error handling was added to deal with the initialization
failure.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
* Enable DebugAgentLib to support source level debug over serial
By default, source level debug is NOT enabled. ENABLE_SOURCE_DEBUG
needs to be set to 1 in BoardConfig.py of each Platforms.
- self.ENABLE_SOURCE_DEBUG = 1
As an initial drop, there are some limitations on APL platform.
- Stage1A does not include DebugAgentLib due to Stage1A size
limitation(32KB). Further optimization is required.
- DebugAgentLib supports ONLY POSTMEM debugging on APL currently.
Refer to EDKII Debugging:
- https://github.com/tianocore/tianocore.github.io/wiki/EDK-II-Debugging
- https://github.com/tianocore/tianocore.github.io/wiki/SourceLevelDebugPkg
Change-Id: Ia28c5470bc5755768f2b380cc1dabbcb8ee60f0d
Signed-off-by: Aiden Park <aiden.park@intel.com>
* Additional changes for DebugAgent
- Adjust stage size depending on ENABLE_SOURCE_DEBUG Pcd value
- Add PeCoffFindAndReportImageInfo
- Fix debugger hang at Shell
Change-Id: I11b41e5ad610fcb2999e9d43e5dd8f8899e8265a
Signed-off-by: Aiden Park <aiden.park@intel.com>
* Move PeCoffFindAndReportImageInfo() from LitePeCoffLib to DebugAgentLib
Change-Id: I2c4ab4f9561dfd0536da1820048f0e5f2660e2ab
Signed-off-by: Aiden Park <aiden.park@intel.com>
This patch implemented USB keyboard library and added it as an
input console device. It can be enabled by setting BIT1 in
self.CONSOLE_IN_DEVICE_MASK in BoardConfig.py. By default, it
will be disabled for performance and size consideration.
Test has been done on APL Leafhill board. USB keyboard can work
in Shell.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Current implementation assumes serial port is the only input console
device supported. But other input console devices can be added later
on. This patch added a ConsoleInLib to abstract the input console
interfaces. It also added PCDs to control enabled input console
devices.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>