Current SBL can only support on VBT file. However, different board
might need different VBT table. It is better to have the capability
to embed multiple VBT table into the image. This patch implemented
this feature and enabled it on QEMU. By default, it will take the
original behavior. if _MULTI_VBT_FILE in BoardConfig.py is specified,
multiple VBT files can be used.
If multiple VBT table support is required, list them as:
{VbtImageId1 :VbtFileName1, VbtImageId2 : VbtFileName2, ...}
VbtImageId is ID to identify a VBT image. It is a UINT32 number to
match the ImageId field in the VBT container.
VbtFileName is the VBT file name. It needs to be located under platform
VbtBin folder.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
This patch fixed some QEMU firmware update related issues.
It enabled firmware update testing on QEMU using script.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
This patch added SMM TSEG range support in QEMU FSP. It also added
QEMU TSEG base and size reporting in HOB.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
This patch updates firmware update code to get capsule location
information from configuration data instead of searching in all the
available boot media.
Signed-off-by: Raghava Gudla <raghava.gudla@intel.com>
Previous USB keyboard console support commit worked fine on APL real
platform, but it has issue on QEMU. This patch further enables USB
keyboard console support for QEMU. A new PcdUsbKeyboardPollingTimeout
is added. It will be used to control the USB keyboard interrupt
transfer polling timeout. For QEMU, it needs a larger number due to
timing issue. As part of it, booting from USB device is also enabled
by this patch. This patch fixes#30.
To test USB keyboard console in QEMU, please first change
CONSOLE_IN _DEVICE_MASK in BoardConfig.py to 3, and then add the
following in the QEMU command line to add XHCI controller and USB KB:
-device qemu-xhci,id=xhci,bus=pcie.0,addr=4 -device usb-kbd,bus=xhci.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
On APL platform, all PCI MMIO range is set to UC in current
implementation. It includes graphics framebuffer MMIO. It
caused the system performance issue due to large mount of
framebuffer write access. This patch set framebuffer as
WC (WriteCombining) per recommendation to enhance system
performance.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
This patch simplifies the GraphicsLib code and adds an abstraction layer
for printing to a virtual "console," through the familier
ConsoleWrite(buffer, len) style function call.
ConsoleWrite can be configured to output to either the serial port, or
the display framebuffer, or both. This primarily enables the command
shell to be used with a display and keyboard.
Signed-off-by: Borgerson, Matthew A <matthew.a.borgerson@intel.com>
* Enable DebugAgentLib to support source level debug over serial
By default, source level debug is NOT enabled. ENABLE_SOURCE_DEBUG
needs to be set to 1 in BoardConfig.py of each Platforms.
- self.ENABLE_SOURCE_DEBUG = 1
As an initial drop, there are some limitations on APL platform.
- Stage1A does not include DebugAgentLib due to Stage1A size
limitation(32KB). Further optimization is required.
- DebugAgentLib supports ONLY POSTMEM debugging on APL currently.
Refer to EDKII Debugging:
- https://github.com/tianocore/tianocore.github.io/wiki/EDK-II-Debugging
- https://github.com/tianocore/tianocore.github.io/wiki/SourceLevelDebugPkg
Change-Id: Ia28c5470bc5755768f2b380cc1dabbcb8ee60f0d
Signed-off-by: Aiden Park <aiden.park@intel.com>
* Additional changes for DebugAgent
- Adjust stage size depending on ENABLE_SOURCE_DEBUG Pcd value
- Add PeCoffFindAndReportImageInfo
- Fix debugger hang at Shell
Change-Id: I11b41e5ad610fcb2999e9d43e5dd8f8899e8265a
Signed-off-by: Aiden Park <aiden.park@intel.com>
* Move PeCoffFindAndReportImageInfo() from LitePeCoffLib to DebugAgentLib
Change-Id: I2c4ab4f9561dfd0536da1820048f0e5f2660e2ab
Signed-off-by: Aiden Park <aiden.park@intel.com>
This patch implemented USB keyboard library and added it as an
input console device. It can be enabled by setting BIT1 in
self.CONSOLE_IN_DEVICE_MASK in BoardConfig.py. By default, it
will be disabled for performance and size consideration.
Test has been done on APL Leafhill board. USB keyboard can work
in Shell.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Update build tool to use Buildloader.py to build SBL
in both Linux and Windows.
Update tools to support multiple workspaces, so platform
packages could be in another place.
TEST=Build qemu and APL platform success.
Change-Id: I2482037ba605218c947b6de28abe8e3eeacdc17f
Signed-off-by: Guo, Dong <guo.dong@intel.com>
Maurice Ma