458 lines
17 KiB
Plaintext
458 lines
17 KiB
Plaintext
|
|
Performance Counters for Linux
|
|
------------------------------
|
|
|
|
Performance counters are special hardware registers available on most modern
|
|
CPUs. These registers count the number of certain types of hw events: such
|
|
as instructions executed, cachemisses suffered, or branches mis-predicted -
|
|
without slowing down the kernel or applications. These registers can also
|
|
trigger interrupts when a threshold number of events have passed - and can
|
|
thus be used to profile the code that runs on that CPU.
|
|
|
|
The Linux Performance Counter subsystem provides an abstraction of these
|
|
hardware capabilities. It provides per task and per CPU counters, counter
|
|
groups, and it provides event capabilities on top of those. It
|
|
provides "virtual" 64-bit counters, regardless of the width of the
|
|
underlying hardware counters.
|
|
|
|
Performance counters are accessed via special file descriptors.
|
|
There's one file descriptor per virtual counter used.
|
|
|
|
The special file descriptor is opened via the perf_counter_open()
|
|
system call:
|
|
|
|
int sys_perf_counter_open(struct perf_counter_hw_event *hw_event_uptr,
|
|
pid_t pid, int cpu, int group_fd,
|
|
unsigned long flags);
|
|
|
|
The syscall returns the new fd. The fd can be used via the normal
|
|
VFS system calls: read() can be used to read the counter, fcntl()
|
|
can be used to set the blocking mode, etc.
|
|
|
|
Multiple counters can be kept open at a time, and the counters
|
|
can be poll()ed.
|
|
|
|
When creating a new counter fd, 'perf_counter_hw_event' is:
|
|
|
|
struct perf_counter_hw_event {
|
|
/*
|
|
* The MSB of the config word signifies if the rest contains cpu
|
|
* specific (raw) counter configuration data, if unset, the next
|
|
* 7 bits are an event type and the rest of the bits are the event
|
|
* identifier.
|
|
*/
|
|
__u64 config;
|
|
|
|
__u64 irq_period;
|
|
__u32 record_type;
|
|
__u32 read_format;
|
|
|
|
__u64 disabled : 1, /* off by default */
|
|
inherit : 1, /* children inherit it */
|
|
pinned : 1, /* must always be on PMU */
|
|
exclusive : 1, /* only group on PMU */
|
|
exclude_user : 1, /* don't count user */
|
|
exclude_kernel : 1, /* ditto kernel */
|
|
exclude_hv : 1, /* ditto hypervisor */
|
|
exclude_idle : 1, /* don't count when idle */
|
|
mmap : 1, /* include mmap data */
|
|
munmap : 1, /* include munmap data */
|
|
comm : 1, /* include comm data */
|
|
|
|
__reserved_1 : 52;
|
|
|
|
__u32 extra_config_len;
|
|
__u32 wakeup_events; /* wakeup every n events */
|
|
|
|
__u64 __reserved_2;
|
|
__u64 __reserved_3;
|
|
};
|
|
|
|
The 'config' field specifies what the counter should count. It
|
|
is divided into 3 bit-fields:
|
|
|
|
raw_type: 1 bit (most significant bit) 0x8000_0000_0000_0000
|
|
type: 7 bits (next most significant) 0x7f00_0000_0000_0000
|
|
event_id: 56 bits (least significant) 0x00ff_ffff_ffff_ffff
|
|
|
|
If 'raw_type' is 1, then the counter will count a hardware event
|
|
specified by the remaining 63 bits of event_config. The encoding is
|
|
machine-specific.
|
|
|
|
If 'raw_type' is 0, then the 'type' field says what kind of counter
|
|
this is, with the following encoding:
|
|
|
|
enum perf_event_types {
|
|
PERF_TYPE_HARDWARE = 0,
|
|
PERF_TYPE_SOFTWARE = 1,
|
|
PERF_TYPE_TRACEPOINT = 2,
|
|
};
|
|
|
|
A counter of PERF_TYPE_HARDWARE will count the hardware event
|
|
specified by 'event_id':
|
|
|
|
/*
|
|
* Generalized performance counter event types, used by the hw_event.event_id
|
|
* parameter of the sys_perf_counter_open() syscall:
|
|
*/
|
|
enum hw_event_ids {
|
|
/*
|
|
* Common hardware events, generalized by the kernel:
|
|
*/
|
|
PERF_COUNT_HW_CPU_CYCLES = 0,
|
|
PERF_COUNT_HW_INSTRUCTIONS = 1,
|
|
PERF_COUNT_HW_CACHE_REFERENCES = 2,
|
|
PERF_COUNT_HW_CACHE_MISSES = 3,
|
|
PERF_COUNT_HW_BRANCH_INSTRUCTIONS = 4,
|
|
PERF_COUNT_HW_BRANCH_MISSES = 5,
|
|
PERF_COUNT_HW_BUS_CYCLES = 6,
|
|
};
|
|
|
|
These are standardized types of events that work relatively uniformly
|
|
on all CPUs that implement Performance Counters support under Linux,
|
|
although there may be variations (e.g., different CPUs might count
|
|
cache references and misses at different levels of the cache hierarchy).
|
|
If a CPU is not able to count the selected event, then the system call
|
|
will return -EINVAL.
|
|
|
|
More hw_event_types are supported as well, but they are CPU-specific
|
|
and accessed as raw events. For example, to count "External bus
|
|
cycles while bus lock signal asserted" events on Intel Core CPUs, pass
|
|
in a 0x4064 event_id value and set hw_event.raw_type to 1.
|
|
|
|
A counter of type PERF_TYPE_SOFTWARE will count one of the available
|
|
software events, selected by 'event_id':
|
|
|
|
/*
|
|
* Special "software" counters provided by the kernel, even if the hardware
|
|
* does not support performance counters. These counters measure various
|
|
* physical and sw events of the kernel (and allow the profiling of them as
|
|
* well):
|
|
*/
|
|
enum sw_event_ids {
|
|
PERF_COUNT_SW_CPU_CLOCK = 0,
|
|
PERF_COUNT_SW_TASK_CLOCK = 1,
|
|
PERF_COUNT_SW_PAGE_FAULTS = 2,
|
|
PERF_COUNT_SW_CONTEXT_SWITCHES = 3,
|
|
PERF_COUNT_SW_CPU_MIGRATIONS = 4,
|
|
PERF_COUNT_SW_PAGE_FAULTS_MIN = 5,
|
|
PERF_COUNT_SW_PAGE_FAULTS_MAJ = 6,
|
|
};
|
|
|
|
Counters of the type PERF_TYPE_TRACEPOINT are available when the ftrace event
|
|
tracer is available, and event_id values can be obtained from
|
|
/debug/tracing/events/*/*/id
|
|
|
|
|
|
Counters come in two flavours: counting counters and sampling
|
|
counters. A "counting" counter is one that is used for counting the
|
|
number of events that occur, and is characterised by having
|
|
irq_period = 0.
|
|
|
|
|
|
A read() on a counter returns the current value of the counter and possible
|
|
additional values as specified by 'read_format', each value is a u64 (8 bytes)
|
|
in size.
|
|
|
|
/*
|
|
* Bits that can be set in hw_event.read_format to request that
|
|
* reads on the counter should return the indicated quantities,
|
|
* in increasing order of bit value, after the counter value.
|
|
*/
|
|
enum perf_counter_read_format {
|
|
PERF_FORMAT_TOTAL_TIME_ENABLED = 1,
|
|
PERF_FORMAT_TOTAL_TIME_RUNNING = 2,
|
|
};
|
|
|
|
Using these additional values one can establish the overcommit ratio for a
|
|
particular counter allowing one to take the round-robin scheduling effect
|
|
into account.
|
|
|
|
|
|
A "sampling" counter is one that is set up to generate an interrupt
|
|
every N events, where N is given by 'irq_period'. A sampling counter
|
|
has irq_period > 0. The record_type controls what data is recorded on each
|
|
interrupt:
|
|
|
|
/*
|
|
* Bits that can be set in hw_event.record_type to request information
|
|
* in the overflow packets.
|
|
*/
|
|
enum perf_counter_record_format {
|
|
PERF_RECORD_IP = 1U << 0,
|
|
PERF_RECORD_TID = 1U << 1,
|
|
PERF_RECORD_TIME = 1U << 2,
|
|
PERF_RECORD_ADDR = 1U << 3,
|
|
PERF_RECORD_GROUP = 1U << 4,
|
|
PERF_RECORD_CALLCHAIN = 1U << 5,
|
|
};
|
|
|
|
Such (and other) events will be recorded in a ring-buffer, which is
|
|
available to user-space using mmap() (see below).
|
|
|
|
The 'disabled' bit specifies whether the counter starts out disabled
|
|
or enabled. If it is initially disabled, it can be enabled by ioctl
|
|
or prctl (see below).
|
|
|
|
The 'inherit' bit, if set, specifies that this counter should count
|
|
events on descendant tasks as well as the task specified. This only
|
|
applies to new descendents, not to any existing descendents at the
|
|
time the counter is created (nor to any new descendents of existing
|
|
descendents).
|
|
|
|
The 'pinned' bit, if set, specifies that the counter should always be
|
|
on the CPU if at all possible. It only applies to hardware counters
|
|
and only to group leaders. If a pinned counter cannot be put onto the
|
|
CPU (e.g. because there are not enough hardware counters or because of
|
|
a conflict with some other event), then the counter goes into an
|
|
'error' state, where reads return end-of-file (i.e. read() returns 0)
|
|
until the counter is subsequently enabled or disabled.
|
|
|
|
The 'exclusive' bit, if set, specifies that when this counter's group
|
|
is on the CPU, it should be the only group using the CPU's counters.
|
|
In future, this will allow sophisticated monitoring programs to supply
|
|
extra configuration information via 'extra_config_len' to exploit
|
|
advanced features of the CPU's Performance Monitor Unit (PMU) that are
|
|
not otherwise accessible and that might disrupt other hardware
|
|
counters.
|
|
|
|
The 'exclude_user', 'exclude_kernel' and 'exclude_hv' bits provide a
|
|
way to request that counting of events be restricted to times when the
|
|
CPU is in user, kernel and/or hypervisor mode.
|
|
|
|
The 'mmap' and 'munmap' bits allow recording of PROT_EXEC mmap/munmap
|
|
operations, these can be used to relate userspace IP addresses to actual
|
|
code, even after the mapping (or even the whole process) is gone,
|
|
these events are recorded in the ring-buffer (see below).
|
|
|
|
The 'comm' bit allows tracking of process comm data on process creation.
|
|
This too is recorded in the ring-buffer (see below).
|
|
|
|
The 'pid' parameter to the perf_counter_open() system call allows the
|
|
counter to be specific to a task:
|
|
|
|
pid == 0: if the pid parameter is zero, the counter is attached to the
|
|
current task.
|
|
|
|
pid > 0: the counter is attached to a specific task (if the current task
|
|
has sufficient privilege to do so)
|
|
|
|
pid < 0: all tasks are counted (per cpu counters)
|
|
|
|
The 'cpu' parameter allows a counter to be made specific to a CPU:
|
|
|
|
cpu >= 0: the counter is restricted to a specific CPU
|
|
cpu == -1: the counter counts on all CPUs
|
|
|
|
(Note: the combination of 'pid == -1' and 'cpu == -1' is not valid.)
|
|
|
|
A 'pid > 0' and 'cpu == -1' counter is a per task counter that counts
|
|
events of that task and 'follows' that task to whatever CPU the task
|
|
gets schedule to. Per task counters can be created by any user, for
|
|
their own tasks.
|
|
|
|
A 'pid == -1' and 'cpu == x' counter is a per CPU counter that counts
|
|
all events on CPU-x. Per CPU counters need CAP_SYS_ADMIN privilege.
|
|
|
|
The 'flags' parameter is currently unused and must be zero.
|
|
|
|
The 'group_fd' parameter allows counter "groups" to be set up. A
|
|
counter group has one counter which is the group "leader". The leader
|
|
is created first, with group_fd = -1 in the perf_counter_open call
|
|
that creates it. The rest of the group members are created
|
|
subsequently, with group_fd giving the fd of the group leader.
|
|
(A single counter on its own is created with group_fd = -1 and is
|
|
considered to be a group with only 1 member.)
|
|
|
|
A counter group is scheduled onto the CPU as a unit, that is, it will
|
|
only be put onto the CPU if all of the counters in the group can be
|
|
put onto the CPU. This means that the values of the member counters
|
|
can be meaningfully compared, added, divided (to get ratios), etc.,
|
|
with each other, since they have counted events for the same set of
|
|
executed instructions.
|
|
|
|
|
|
Like stated, asynchronous events, like counter overflow or PROT_EXEC mmap
|
|
tracking are logged into a ring-buffer. This ring-buffer is created and
|
|
accessed through mmap().
|
|
|
|
The mmap size should be 1+2^n pages, where the first page is a meta-data page
|
|
(struct perf_counter_mmap_page) that contains various bits of information such
|
|
as where the ring-buffer head is.
|
|
|
|
/*
|
|
* Structure of the page that can be mapped via mmap
|
|
*/
|
|
struct perf_counter_mmap_page {
|
|
__u32 version; /* version number of this structure */
|
|
__u32 compat_version; /* lowest version this is compat with */
|
|
|
|
/*
|
|
* Bits needed to read the hw counters in user-space.
|
|
*
|
|
* u32 seq;
|
|
* s64 count;
|
|
*
|
|
* do {
|
|
* seq = pc->lock;
|
|
*
|
|
* barrier()
|
|
* if (pc->index) {
|
|
* count = pmc_read(pc->index - 1);
|
|
* count += pc->offset;
|
|
* } else
|
|
* goto regular_read;
|
|
*
|
|
* barrier();
|
|
* } while (pc->lock != seq);
|
|
*
|
|
* NOTE: for obvious reason this only works on self-monitoring
|
|
* processes.
|
|
*/
|
|
__u32 lock; /* seqlock for synchronization */
|
|
__u32 index; /* hardware counter identifier */
|
|
__s64 offset; /* add to hardware counter value */
|
|
|
|
/*
|
|
* Control data for the mmap() data buffer.
|
|
*
|
|
* User-space reading this value should issue an rmb(), on SMP capable
|
|
* platforms, after reading this value -- see perf_counter_wakeup().
|
|
*/
|
|
__u32 data_head; /* head in the data section */
|
|
};
|
|
|
|
NOTE: the hw-counter userspace bits are arch specific and are currently only
|
|
implemented on powerpc.
|
|
|
|
The following 2^n pages are the ring-buffer which contains events of the form:
|
|
|
|
#define PERF_EVENT_MISC_KERNEL (1 << 0)
|
|
#define PERF_EVENT_MISC_USER (1 << 1)
|
|
#define PERF_EVENT_MISC_OVERFLOW (1 << 2)
|
|
|
|
struct perf_event_header {
|
|
__u32 type;
|
|
__u16 misc;
|
|
__u16 size;
|
|
};
|
|
|
|
enum perf_event_type {
|
|
|
|
/*
|
|
* The MMAP events record the PROT_EXEC mappings so that we can
|
|
* correlate userspace IPs to code. They have the following structure:
|
|
*
|
|
* struct {
|
|
* struct perf_event_header header;
|
|
*
|
|
* u32 pid, tid;
|
|
* u64 addr;
|
|
* u64 len;
|
|
* u64 pgoff;
|
|
* char filename[];
|
|
* };
|
|
*/
|
|
PERF_EVENT_MMAP = 1,
|
|
PERF_EVENT_MUNMAP = 2,
|
|
|
|
/*
|
|
* struct {
|
|
* struct perf_event_header header;
|
|
*
|
|
* u32 pid, tid;
|
|
* char comm[];
|
|
* };
|
|
*/
|
|
PERF_EVENT_COMM = 3,
|
|
|
|
/*
|
|
* When header.misc & PERF_EVENT_MISC_OVERFLOW the event_type field
|
|
* will be PERF_RECORD_*
|
|
*
|
|
* struct {
|
|
* struct perf_event_header header;
|
|
*
|
|
* { u64 ip; } && PERF_RECORD_IP
|
|
* { u32 pid, tid; } && PERF_RECORD_TID
|
|
* { u64 time; } && PERF_RECORD_TIME
|
|
* { u64 addr; } && PERF_RECORD_ADDR
|
|
*
|
|
* { u64 nr;
|
|
* { u64 event, val; } cnt[nr]; } && PERF_RECORD_GROUP
|
|
*
|
|
* { u16 nr,
|
|
* hv,
|
|
* kernel,
|
|
* user;
|
|
* u64 ips[nr]; } && PERF_RECORD_CALLCHAIN
|
|
* };
|
|
*/
|
|
};
|
|
|
|
NOTE: PERF_RECORD_CALLCHAIN is arch specific and currently only implemented
|
|
on x86.
|
|
|
|
Notification of new events is possible through poll()/select()/epoll() and
|
|
fcntl() managing signals.
|
|
|
|
Normally a notification is generated for every page filled, however one can
|
|
additionally set perf_counter_hw_event.wakeup_events to generate one every
|
|
so many counter overflow events.
|
|
|
|
Future work will include a splice() interface to the ring-buffer.
|
|
|
|
|
|
Counters can be enabled and disabled in two ways: via ioctl and via
|
|
prctl. When a counter is disabled, it doesn't count or generate
|
|
events but does continue to exist and maintain its count value.
|
|
|
|
An individual counter or counter group can be enabled with
|
|
|
|
ioctl(fd, PERF_COUNTER_IOC_ENABLE);
|
|
|
|
or disabled with
|
|
|
|
ioctl(fd, PERF_COUNTER_IOC_DISABLE);
|
|
|
|
Enabling or disabling the leader of a group enables or disables the
|
|
whole group; that is, while the group leader is disabled, none of the
|
|
counters in the group will count. Enabling or disabling a member of a
|
|
group other than the leader only affects that counter - disabling an
|
|
non-leader stops that counter from counting but doesn't affect any
|
|
other counter.
|
|
|
|
Additionally, non-inherited overflow counters can use
|
|
|
|
ioctl(fd, PERF_COUNTER_IOC_REFRESH, nr);
|
|
|
|
to enable a counter for 'nr' events, after which it gets disabled again.
|
|
|
|
A process can enable or disable all the counter groups that are
|
|
attached to it, using prctl:
|
|
|
|
prctl(PR_TASK_PERF_COUNTERS_ENABLE);
|
|
|
|
prctl(PR_TASK_PERF_COUNTERS_DISABLE);
|
|
|
|
This applies to all counters on the current process, whether created
|
|
by this process or by another, and doesn't affect any counters that
|
|
this process has created on other processes. It only enables or
|
|
disables the group leaders, not any other members in the groups.
|
|
|
|
|
|
Arch requirements
|
|
-----------------
|
|
|
|
If your architecture does not have hardware performance metrics, you can
|
|
still use the generic software counters based on hrtimers for sampling.
|
|
|
|
So to start with, in order to add HAVE_PERF_COUNTERS to your Kconfig, you
|
|
will need at least this:
|
|
- asm/perf_counter.h - a basic stub will suffice at first
|
|
- support for atomic64 types (and associated helper functions)
|
|
- set_perf_counter_pending() implemented
|
|
|
|
If your architecture does have hardware capabilities, you can override the
|
|
weak stub hw_perf_counter_init() to register hardware counters.
|