acrn-kernel/arch/arm/mach-omap2
Gupta, Ajay Kumar e8e2ff462d USB: musb: fix the nop registration for OMAP3EVM
OMAP3EVM uses ISP1504 phy which doesn't require any programming and
thus has to use NOP otg transceiver.

Cleanups being done:
	- Remove unwanted code in usb-musb.c file
	- Register NOP in OMAP3EVM board file using
	  usb_nop_xceiv_register().
	- Select NOP_USB_XCEIV for OMAP3EVM boards.
	- Don't enable TWL4030_USB in omap3_evm_defconfig

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Eino-Ville Talvala <talvala@stanford.edu>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-07 16:05:13 -07:00
..
Kconfig ARM: OMAP4: Add support for 4430 SDP 2009-05-28 14:16:05 -07:00
Makefile ARM: OMAP4: SMP: Enable SMP support for OMAP4430 2009-06-09 13:04:06 +05:30
Makefile.boot
board-2430sdp.c ARM: OMAP2: 2430SDP: Add FB support to board file 2009-05-28 13:23:53 -07:00
board-3430sdp.c ARM: OMAP3: SDRC: add timing data for Qimonda HYB18M512160AF-6 2009-05-28 14:03:59 -07:00
board-4430sdp.c ARM: OMAP4: Add support for 4430 SDP 2009-05-28 14:16:05 -07:00
board-apollon.c
board-generic.c
board-h4.c
board-ldp.c ARM: OMAP3: Initialize more devices for LDP 2009-05-28 14:04:00 -07:00
board-omap3beagle.c ARM: OMAP3: Initialize regulators for Beagle and Overo 2009-05-28 14:04:03 -07:00
board-omap3evm.c USB: musb: fix the nop registration for OMAP3EVM 2009-08-07 16:05:13 -07:00
board-omap3pandora.c ARM: OMAP3: pandora: add support for mode devices 2009-05-28 14:15:44 -07:00
board-overo.c ARM: OMAP3: Initialize regulators for Beagle and Overo 2009-05-28 14:04:03 -07:00
board-rx51-peripherals.c OMAP3: RX51: Use OneNAND sync read / write 2009-06-23 13:30:25 +03:00
board-rx51.c
board-zoom-debugboard.c ARM: OMAP3: Add support for OMAP3 Zoom2 board 2009-05-28 14:04:04 -07:00
board-zoom2.c ARM: OMAP3: Add support for OMAP3 Zoom2 board 2009-05-28 14:04:04 -07:00
clock.c OMAP2 clock/powerdomain: off by 1 error in loop timeout comparisons 2009-06-19 19:09:32 -06:00
clock.h
clock24xx.c Merge branch 'omap-clock-upstream' of git://git.pwsan.com/linux-2.6 into for-next 2009-05-26 14:41:35 -07:00
clock24xx.h ARM: OMAP2/3: Remove OMAP_CM_REGADDR 2009-05-25 11:26:46 -07:00
clock34xx.c OMAP3: Add support for DPLL3 divisor values higher than 2 2009-06-19 19:09:32 -06:00
clock34xx.h OMAP3: PM: Add D2D clocks and auto-idle setup to PRCM init 2009-05-28 10:59:07 -07:00
clockdomain.c
clockdomains.h OMAP3: PM: D2D clockdomain supports SW supervised transitions 2009-05-28 10:59:08 -07:00
cm-regbits-24xx.h
cm-regbits-34xx.h OMAP3: PM: Add D2D clocks and auto-idle setup to PRCM init 2009-05-28 10:59:07 -07:00
cm.h ARM: OMAP2/3: Remove OMAP_CM_REGADDR 2009-05-25 11:26:46 -07:00
control.c
devices.c
gpmc-onenand.c OMAP2/3: gpmc-onenand: correct use of async timings 2009-06-23 13:30:24 +03:00
gpmc-smc91x.c ARM: OMAP2/3: Add generic smc91x support when connected to GPMC 2009-05-28 13:23:52 -07:00
gpmc.c ARM: OMAP4: Add minimal support for omap4 2009-05-28 14:16:04 -07:00
id.c OMAP2/3: Add omap_type() for determining GP/EMU/HS 2009-06-23 13:30:23 +03:00
io.c OMAP3 clock: initialize SDRC timings at kernel start 2009-06-19 19:09:30 -06:00
iommu2.c
irq.c OMAP: Add new function to check wether there is irq pending 2009-05-28 10:59:04 -07:00
mailbox.c OMAP2/3: omap mailbox: platform_get_irq() error ignored 2009-06-23 13:30:22 +03:00
mcbsp.c ARM: includecheck fix: mach-omap2/mcbsp.c 2009-07-25 17:08:23 +01:00
mmc-twl4030.c OMAP2/3: mmc-twl4030: use correct controller in twl_mmc23_set_power 2009-06-23 13:30:22 +03:00
mmc-twl4030.h ARM: OMAP3: mmc-twl4030 uses regulator framework 2009-05-28 14:04:03 -07:00
mux.c
omap-headsmp.S ARM: OMAP4: SMP: Add OMAP4430 SMP board files 2009-06-09 13:03:50 +05:30
omap-smp.c ARM: OMAP4: SMP: Add OMAP4430 SMP board files 2009-06-09 13:03:50 +05:30
omap3-iommu.c omap iommu: add MPU_BRIDGE_IOMMU for tidspbridge migration 2009-05-22 10:17:02 +03:00
pm-debug.c OMAP2/3: PM: push core PM code from linux-omap 2009-05-28 10:58:50 -07:00
pm.h OMAP2/3: PM: push core PM code from linux-omap 2009-05-28 10:58:50 -07:00
pm24xx.c OMAP3: PM: UART: disable clocks when idle and off-mode support 2009-05-28 10:59:06 -07:00
pm34xx.c OMAP3: PM: prevent module wakeups from waking IVA2 2009-05-28 10:59:10 -07:00
powerdomain.c OMAP2 clock/powerdomain: off by 1 error in loop timeout comparisons 2009-06-19 19:09:32 -06:00
powerdomains.h
powerdomains24xx.h
powerdomains34xx.h
prcm-common.h OMAP2/3: PM: push core PM code from linux-omap 2009-05-28 10:58:50 -07:00
prcm.c
prm-regbits-24xx.h
prm-regbits-34xx.h
prm.h OMAP3: PM: prevent module wakeups from waking IVA2 2009-05-28 10:59:10 -07:00
sdram-micron-mt46h32m32lf-6.h ARM: OMAP3: SDRC: add timing data for Micron MT46H32M32LF-6, v2 2009-05-28 14:03:59 -07:00
sdram-qimonda-hyb18m512160af-6.h ARM: OMAP3: SDRC: add timing data for Qimonda HYB18M512160AF-6 2009-05-28 14:03:59 -07:00
sdrc.c OMAP2/3: PM: push core PM code from linux-omap 2009-05-28 10:58:50 -07:00
sdrc.h
sdrc2xxx.c ARM: OMAP2/3: Remove OMAP_PRM_REGADDR and OMAP2_PRM_BASE 2009-05-25 11:26:42 -07:00
serial.c Merge branch 'omap4' into for-next 2009-05-28 15:45:14 -07:00
sleep24xx.S OMAP2/3: PM: push core PM code from linux-omap 2009-05-28 10:58:50 -07:00
sleep34xx.S OMAP2/3: PM: push core PM code from linux-omap 2009-05-28 10:58:50 -07:00
sram34xx.S OMAP3 SDRC: set FIXEDDELAY when disabling SDRC DLL 2009-06-19 19:09:32 -06:00
sram242x.S ARM: OMAP2/3: Remove OMAP_PRM_REGADDR and OMAP2_PRM_BASE 2009-05-25 11:26:42 -07:00
sram243x.S ARM: OMAP2/3: Remove OMAP_PRM_REGADDR and OMAP2_PRM_BASE 2009-05-25 11:26:42 -07:00
timer-gp.c ARM: OMAP4: SMP: Add mpu timer support for OMAP4430 2009-06-09 13:03:59 +05:30
timer-mpu.c ARM: OMAP4: SMP: Add mpu timer support for OMAP4430 2009-06-09 13:03:59 +05:30
usb-musb.c USB: musb: fix the nop registration for OMAP3EVM 2009-08-07 16:05:13 -07:00
usb-tusb6010.c