OrgACRN
/
acrn-kernel
mirror of https://github.com/projectacrn/acrn-kernel.git
1
0
Fork 0
Code Issues Releases Wiki Activity
acrn-kernel/drivers/ata/pata_cs5536.c

302 lines
7.2 KiB
C
Raw Blame History

/*
* pata_cs5536.c - CS5536 PATA for new ATA layer
* (C) 2007 Martin K. Petersen <mkp@mkp.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Documentation:
* Available from AMD web site.
*
* The IDE timing registers for the CS5536 live in the Geode Machine
* Specific Register file and not PCI config space. Most BIOSes
* virtualize the PCI registers so the chip looks like a standard IDE
* controller. Unfortunately not all implementations get this right.
* In particular some have problems with unaligned accesses to the
* virtualized PCI registers. This driver always does full dword
* writes to work around the issue. Also, in case of a bad BIOS this
* driver can be loaded with the "msr=1" parameter which forces using
* the Machine Specific Registers to configure the device.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/libata.h>
#include <scsi/scsi_host.h>
#include <asm/msr.h>
#define DRV_NAME "pata_cs5536"
#define DRV_VERSION "0.0.7"
enum {
CFG = 0,
DTC = 1,
CAST = 2,
ETC = 3,
MSR_IDE_BASE = 0x51300000,
MSR_IDE_CFG = (MSR_IDE_BASE + 0x10),
MSR_IDE_DTC = (MSR_IDE_BASE + 0x12),
MSR_IDE_CAST = (MSR_IDE_BASE + 0x13),
MSR_IDE_ETC = (MSR_IDE_BASE + 0x14),
PCI_IDE_CFG = 0x40,
PCI_IDE_DTC = 0x48,
PCI_IDE_CAST = 0x4c,
PCI_IDE_ETC = 0x50,
IDE_CFG_CHANEN = 0x2,
IDE_CFG_CABLE = 0x10000,
IDE_D0_SHIFT = 24,
IDE_D1_SHIFT = 16,
IDE_DRV_MASK = 0xff,
IDE_CAST_D0_SHIFT = 6,
IDE_CAST_D1_SHIFT = 4,
IDE_CAST_DRV_MASK = 0x3,
IDE_CAST_CMD_MASK = 0xff,
IDE_CAST_CMD_SHIFT = 24,
IDE_ETC_NODMA = 0x03,
};
static int use_msr;
static const u32 msr_reg[4] = {
MSR_IDE_CFG, MSR_IDE_DTC, MSR_IDE_CAST, MSR_IDE_ETC,
};
static const u8 pci_reg[4] = {
PCI_IDE_CFG, PCI_IDE_DTC, PCI_IDE_CAST, PCI_IDE_ETC,
};
static inline int cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
{
if (unlikely(use_msr)) {
u32 dummy;
rdmsr(msr_reg[reg], *val, dummy);
return 0;
}
return pci_read_config_dword(pdev, pci_reg[reg], val);
}
static inline int cs5536_write(struct pci_dev *pdev, int reg, int val)
{
if (unlikely(use_msr)) {
wrmsr(msr_reg[reg], val, 0);
return 0;
}
return pci_write_config_dword(pdev, pci_reg[reg], val);
}
/**
* cs5536_cable_detect - detect cable type
* @ap: Port to detect on
*
* Perform cable detection for ATA66 capable cable. Return a libata
* cable type.
*/
static int cs5536_cable_detect(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u32 cfg;
cs5536_read(pdev, CFG, &cfg);
if (cfg & (IDE_CFG_CABLE << ap->port_no))
return ATA_CBL_PATA80;
else
return ATA_CBL_PATA40;
}
/**
* cs5536_set_piomode - PIO setup
* @ap: ATA interface
* @adev: device on the interface
*/
static void cs5536_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
static const u8 drv_timings[5] = {
0x98, 0x55, 0x32, 0x21, 0x20,
};
static const u8 addr_timings[5] = {
0x2, 0x1, 0x0, 0x0, 0x0,
};
static const u8 cmd_timings[5] = {
0x99, 0x92, 0x90, 0x22, 0x20,
};
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct ata_device *pair = ata_dev_pair(adev);
int mode = adev->pio_mode - XFER_PIO_0;
int cmdmode = mode;
int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT;
int cshift = adev->devno ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT;
u32 dtc, cast, etc;
if (pair)
cmdmode = min(mode, pair->pio_mode - XFER_PIO_0);
cs5536_read(pdev, DTC, &dtc);
cs5536_read(pdev, CAST, &cast);
cs5536_read(pdev, ETC, &etc);
dtc &= ~(IDE_DRV_MASK << dshift);
dtc |= drv_timings[mode] << dshift;
cast &= ~(IDE_CAST_DRV_MASK << cshift);
cast |= addr_timings[mode] << cshift;
cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT);
cast |= cmd_timings[cmdmode] << IDE_CAST_CMD_SHIFT;
etc &= ~(IDE_DRV_MASK << dshift);
etc |= IDE_ETC_NODMA << dshift;
cs5536_write(pdev, DTC, dtc);
cs5536_write(pdev, CAST, cast);
cs5536_write(pdev, ETC, etc);
}
/**
* cs5536_set_dmamode - DMA timing setup
* @ap: ATA interface
* @adev: Device being configured
*
*/
static void cs5536_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
static const u8 udma_timings[6] = {
0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6,
};
static const u8 mwdma_timings[3] = {
0x67, 0x21, 0x20,
};
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u32 dtc, etc;
int mode = adev->dma_mode;
int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT;
if (mode >= XFER_UDMA_0) {
cs5536_read(pdev, ETC, &etc);
etc &= ~(IDE_DRV_MASK << dshift);
etc |= udma_timings[mode - XFER_UDMA_0] << dshift;
cs5536_write(pdev, ETC, etc);
} else { /* MWDMA */
cs5536_read(pdev, DTC, &dtc);
dtc &= ~(IDE_DRV_MASK << dshift);
dtc |= mwdma_timings[mode - XFER_MW_DMA_0] << dshift;
cs5536_write(pdev, DTC, dtc);
}
}
static struct scsi_host_template cs5536_sht = {
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations cs5536_port_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = cs5536_cable_detect,
.set_piomode = cs5536_set_piomode,
.set_dmamode = cs5536_set_dmamode,
};
/**
* cs5536_init_one
* @dev: PCI device
* @id: Entry in match table
*
*/
static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
.port_ops = &cs5536_port_ops,
};
const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
u32 cfg;
if (use_msr)
printk(KERN_ERR DRV_NAME ": Using MSR regs instead of PCI\n");
cs5536_read(dev, CFG, &cfg);
if ((cfg & IDE_CFG_CHANEN) == 0) {
printk(KERN_ERR DRV_NAME ": disabled by BIOS\n");
return -ENODEV;
}
return ata_pci_sff_init_one(dev, ppi, &cs5536_sht, NULL);
}
static const struct pci_device_id cs5536[] = {
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), },
{ },
};
static struct pci_driver cs5536_pci_driver = {
.name = DRV_NAME,
.id_table = cs5536,
.probe = cs5536_init_one,
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
#endif
};
static int __init cs5536_init(void)
{
return pci_register_driver(&cs5536_pci_driver);
}
static void __exit cs5536_exit(void)
{
pci_unregister_driver(&cs5536_pci_driver);
}
MODULE_AUTHOR("Martin K. Petersen");
MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, cs5536);
MODULE_VERSION(DRV_VERSION);
module_param_named(msr, use_msr, int, 0644);
MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");
module_init(cs5536_init);
module_exit(cs5536_exit);
Reference in New Issue View Git Blame Copy Permalink