434 lines
11 KiB
C
434 lines
11 KiB
C
/****************************************************************************
|
|
|
|
Copyright Echo Digital Audio Corporation (c) 1998 - 2004
|
|
All rights reserved
|
|
www.echoaudio.com
|
|
|
|
This file is part of Echo Digital Audio's generic driver library.
|
|
|
|
Echo Digital Audio's generic driver library is free software;
|
|
you can redistribute it and/or modify it under the terms of
|
|
the GNU General Public License as published by the Free Software
|
|
Foundation.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 59 Temple Place - Suite 330, Boston,
|
|
MA 02111-1307, USA.
|
|
|
|
*************************************************************************
|
|
|
|
Translation from C++ and adaptation for use in ALSA-Driver
|
|
were made by Giuliano Pochini <pochini@shiny.it>
|
|
|
|
****************************************************************************/
|
|
|
|
|
|
|
|
/* These functions are common for all "3G" cards */
|
|
|
|
|
|
static int check_asic_status(struct echoaudio *chip)
|
|
{
|
|
u32 box_status;
|
|
|
|
if (wait_handshake(chip))
|
|
return -EIO;
|
|
|
|
chip->comm_page->ext_box_status = cpu_to_le32(E3G_ASIC_NOT_LOADED);
|
|
chip->asic_loaded = false;
|
|
clear_handshake(chip);
|
|
send_vector(chip, DSP_VC_TEST_ASIC);
|
|
|
|
if (wait_handshake(chip)) {
|
|
chip->dsp_code = NULL;
|
|
return -EIO;
|
|
}
|
|
|
|
box_status = le32_to_cpu(chip->comm_page->ext_box_status);
|
|
dev_dbg(chip->card->dev, "box_status=%x\n", box_status);
|
|
if (box_status == E3G_ASIC_NOT_LOADED)
|
|
return -ENODEV;
|
|
|
|
chip->asic_loaded = true;
|
|
return box_status & E3G_BOX_TYPE_MASK;
|
|
}
|
|
|
|
|
|
|
|
static inline u32 get_frq_reg(struct echoaudio *chip)
|
|
{
|
|
return le32_to_cpu(chip->comm_page->e3g_frq_register);
|
|
}
|
|
|
|
|
|
|
|
/* Most configuration of 3G cards is accomplished by writing the control
|
|
register. write_control_reg sends the new control register value to the DSP. */
|
|
static int write_control_reg(struct echoaudio *chip, u32 ctl, u32 frq,
|
|
char force)
|
|
{
|
|
__le32 ctl_reg, frq_reg;
|
|
|
|
if (wait_handshake(chip))
|
|
return -EIO;
|
|
|
|
dev_dbg(chip->card->dev,
|
|
"WriteControlReg: Setting 0x%x, 0x%x\n", ctl, frq);
|
|
|
|
ctl_reg = cpu_to_le32(ctl);
|
|
frq_reg = cpu_to_le32(frq);
|
|
|
|
if (ctl_reg != chip->comm_page->control_register ||
|
|
frq_reg != chip->comm_page->e3g_frq_register || force) {
|
|
chip->comm_page->e3g_frq_register = frq_reg;
|
|
chip->comm_page->control_register = ctl_reg;
|
|
clear_handshake(chip);
|
|
return send_vector(chip, DSP_VC_WRITE_CONTROL_REG);
|
|
}
|
|
|
|
dev_dbg(chip->card->dev, "WriteControlReg: not written, no change\n");
|
|
return 0;
|
|
}
|
|
|
|
|
|
|
|
/* Set the digital mode - currently for Gina24, Layla24, Mona, 3G */
|
|
static int set_digital_mode(struct echoaudio *chip, u8 mode)
|
|
{
|
|
u8 previous_mode;
|
|
int err, i, o;
|
|
|
|
/* All audio channels must be closed before changing the digital mode */
|
|
if (snd_BUG_ON(chip->pipe_alloc_mask))
|
|
return -EAGAIN;
|
|
|
|
if (snd_BUG_ON(!(chip->digital_modes & (1 << mode))))
|
|
return -EINVAL;
|
|
|
|
previous_mode = chip->digital_mode;
|
|
err = dsp_set_digital_mode(chip, mode);
|
|
|
|
/* If we successfully changed the digital mode from or to ADAT,
|
|
* then make sure all output, input and monitor levels are
|
|
* updated by the DSP comm object. */
|
|
if (err >= 0 && previous_mode != mode &&
|
|
(previous_mode == DIGITAL_MODE_ADAT || mode == DIGITAL_MODE_ADAT)) {
|
|
spin_lock_irq(&chip->lock);
|
|
for (o = 0; o < num_busses_out(chip); o++)
|
|
for (i = 0; i < num_busses_in(chip); i++)
|
|
set_monitor_gain(chip, o, i,
|
|
chip->monitor_gain[o][i]);
|
|
|
|
#ifdef ECHOCARD_HAS_INPUT_GAIN
|
|
for (i = 0; i < num_busses_in(chip); i++)
|
|
set_input_gain(chip, i, chip->input_gain[i]);
|
|
update_input_line_level(chip);
|
|
#endif
|
|
|
|
for (o = 0; o < num_busses_out(chip); o++)
|
|
set_output_gain(chip, o, chip->output_gain[o]);
|
|
update_output_line_level(chip);
|
|
spin_unlock_irq(&chip->lock);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
|
|
|
|
static u32 set_spdif_bits(struct echoaudio *chip, u32 control_reg, u32 rate)
|
|
{
|
|
control_reg &= E3G_SPDIF_FORMAT_CLEAR_MASK;
|
|
|
|
switch (rate) {
|
|
case 32000 :
|
|
control_reg |= E3G_SPDIF_SAMPLE_RATE0 | E3G_SPDIF_SAMPLE_RATE1;
|
|
break;
|
|
case 44100 :
|
|
if (chip->professional_spdif)
|
|
control_reg |= E3G_SPDIF_SAMPLE_RATE0;
|
|
break;
|
|
case 48000 :
|
|
control_reg |= E3G_SPDIF_SAMPLE_RATE1;
|
|
break;
|
|
}
|
|
|
|
if (chip->professional_spdif)
|
|
control_reg |= E3G_SPDIF_PRO_MODE;
|
|
|
|
if (chip->non_audio_spdif)
|
|
control_reg |= E3G_SPDIF_NOT_AUDIO;
|
|
|
|
control_reg |= E3G_SPDIF_24_BIT | E3G_SPDIF_TWO_CHANNEL |
|
|
E3G_SPDIF_COPY_PERMIT;
|
|
|
|
return control_reg;
|
|
}
|
|
|
|
|
|
|
|
/* Set the S/PDIF output format */
|
|
static int set_professional_spdif(struct echoaudio *chip, char prof)
|
|
{
|
|
u32 control_reg;
|
|
|
|
control_reg = le32_to_cpu(chip->comm_page->control_register);
|
|
chip->professional_spdif = prof;
|
|
control_reg = set_spdif_bits(chip, control_reg, chip->sample_rate);
|
|
return write_control_reg(chip, control_reg, get_frq_reg(chip), 0);
|
|
}
|
|
|
|
|
|
|
|
/* detect_input_clocks() returns a bitmask consisting of all the input clocks
|
|
currently connected to the hardware; this changes as the user connects and
|
|
disconnects clock inputs. You should use this information to determine which
|
|
clocks the user is allowed to select. */
|
|
static u32 detect_input_clocks(const struct echoaudio *chip)
|
|
{
|
|
u32 clocks_from_dsp, clock_bits;
|
|
|
|
/* Map the DSP clock detect bits to the generic driver clock
|
|
* detect bits */
|
|
clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
|
|
|
|
clock_bits = ECHO_CLOCK_BIT_INTERNAL;
|
|
|
|
if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_WORD)
|
|
clock_bits |= ECHO_CLOCK_BIT_WORD;
|
|
|
|
switch(chip->digital_mode) {
|
|
case DIGITAL_MODE_SPDIF_RCA:
|
|
case DIGITAL_MODE_SPDIF_OPTICAL:
|
|
if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_SPDIF)
|
|
clock_bits |= ECHO_CLOCK_BIT_SPDIF;
|
|
break;
|
|
case DIGITAL_MODE_ADAT:
|
|
if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_ADAT)
|
|
clock_bits |= ECHO_CLOCK_BIT_ADAT;
|
|
break;
|
|
}
|
|
|
|
return clock_bits;
|
|
}
|
|
|
|
|
|
|
|
static int load_asic(struct echoaudio *chip)
|
|
{
|
|
int box_type, err;
|
|
|
|
if (chip->asic_loaded)
|
|
return 0;
|
|
|
|
/* Give the DSP a few milliseconds to settle down */
|
|
mdelay(2);
|
|
|
|
err = load_asic_generic(chip, DSP_FNC_LOAD_3G_ASIC, FW_3G_ASIC);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
chip->asic_code = FW_3G_ASIC;
|
|
|
|
/* Now give the new ASIC some time to set up */
|
|
msleep(1000);
|
|
/* See if it worked */
|
|
box_type = check_asic_status(chip);
|
|
|
|
/* Set up the control register if the load succeeded -
|
|
* 48 kHz, internal clock, S/PDIF RCA mode */
|
|
if (box_type >= 0) {
|
|
err = write_control_reg(chip, E3G_48KHZ,
|
|
E3G_FREQ_REG_DEFAULT, true);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
return box_type;
|
|
}
|
|
|
|
|
|
|
|
static int set_sample_rate(struct echoaudio *chip, u32 rate)
|
|
{
|
|
u32 control_reg, clock, base_rate, frq_reg;
|
|
|
|
/* Only set the clock for internal mode. */
|
|
if (chip->input_clock != ECHO_CLOCK_INTERNAL) {
|
|
dev_warn(chip->card->dev,
|
|
"Cannot set sample rate - clock not set to CLK_CLOCKININTERNAL\n");
|
|
/* Save the rate anyhow */
|
|
chip->comm_page->sample_rate = cpu_to_le32(rate);
|
|
chip->sample_rate = rate;
|
|
set_input_clock(chip, chip->input_clock);
|
|
return 0;
|
|
}
|
|
|
|
if (snd_BUG_ON(rate >= 50000 &&
|
|
chip->digital_mode == DIGITAL_MODE_ADAT))
|
|
return -EINVAL;
|
|
|
|
clock = 0;
|
|
control_reg = le32_to_cpu(chip->comm_page->control_register);
|
|
control_reg &= E3G_CLOCK_CLEAR_MASK;
|
|
|
|
switch (rate) {
|
|
case 96000:
|
|
clock = E3G_96KHZ;
|
|
break;
|
|
case 88200:
|
|
clock = E3G_88KHZ;
|
|
break;
|
|
case 48000:
|
|
clock = E3G_48KHZ;
|
|
break;
|
|
case 44100:
|
|
clock = E3G_44KHZ;
|
|
break;
|
|
case 32000:
|
|
clock = E3G_32KHZ;
|
|
break;
|
|
default:
|
|
clock = E3G_CONTINUOUS_CLOCK;
|
|
if (rate > 50000)
|
|
clock |= E3G_DOUBLE_SPEED_MODE;
|
|
break;
|
|
}
|
|
|
|
control_reg |= clock;
|
|
control_reg = set_spdif_bits(chip, control_reg, rate);
|
|
|
|
base_rate = rate;
|
|
if (base_rate > 50000)
|
|
base_rate /= 2;
|
|
if (base_rate < 32000)
|
|
base_rate = 32000;
|
|
|
|
frq_reg = E3G_MAGIC_NUMBER / base_rate - 2;
|
|
if (frq_reg > E3G_FREQ_REG_MAX)
|
|
frq_reg = E3G_FREQ_REG_MAX;
|
|
|
|
chip->comm_page->sample_rate = cpu_to_le32(rate); /* ignored by the DSP */
|
|
chip->sample_rate = rate;
|
|
dev_dbg(chip->card->dev,
|
|
"SetSampleRate: %d clock %x\n", rate, control_reg);
|
|
|
|
/* Tell the DSP about it - DSP reads both control reg & freq reg */
|
|
return write_control_reg(chip, control_reg, frq_reg, 0);
|
|
}
|
|
|
|
|
|
|
|
/* Set the sample clock source to internal, S/PDIF, ADAT */
|
|
static int set_input_clock(struct echoaudio *chip, u16 clock)
|
|
{
|
|
u32 control_reg, clocks_from_dsp;
|
|
|
|
|
|
/* Mask off the clock select bits */
|
|
control_reg = le32_to_cpu(chip->comm_page->control_register) &
|
|
E3G_CLOCK_CLEAR_MASK;
|
|
clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
|
|
|
|
switch (clock) {
|
|
case ECHO_CLOCK_INTERNAL:
|
|
chip->input_clock = ECHO_CLOCK_INTERNAL;
|
|
return set_sample_rate(chip, chip->sample_rate);
|
|
case ECHO_CLOCK_SPDIF:
|
|
if (chip->digital_mode == DIGITAL_MODE_ADAT)
|
|
return -EAGAIN;
|
|
control_reg |= E3G_SPDIF_CLOCK;
|
|
if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_SPDIF96)
|
|
control_reg |= E3G_DOUBLE_SPEED_MODE;
|
|
else
|
|
control_reg &= ~E3G_DOUBLE_SPEED_MODE;
|
|
break;
|
|
case ECHO_CLOCK_ADAT:
|
|
if (chip->digital_mode != DIGITAL_MODE_ADAT)
|
|
return -EAGAIN;
|
|
control_reg |= E3G_ADAT_CLOCK;
|
|
control_reg &= ~E3G_DOUBLE_SPEED_MODE;
|
|
break;
|
|
case ECHO_CLOCK_WORD:
|
|
control_reg |= E3G_WORD_CLOCK;
|
|
if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_WORD96)
|
|
control_reg |= E3G_DOUBLE_SPEED_MODE;
|
|
else
|
|
control_reg &= ~E3G_DOUBLE_SPEED_MODE;
|
|
break;
|
|
default:
|
|
dev_err(chip->card->dev,
|
|
"Input clock 0x%x not supported for Echo3G\n", clock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
chip->input_clock = clock;
|
|
return write_control_reg(chip, control_reg, get_frq_reg(chip), 1);
|
|
}
|
|
|
|
|
|
|
|
static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode)
|
|
{
|
|
u32 control_reg;
|
|
int err, incompatible_clock;
|
|
|
|
/* Set clock to "internal" if it's not compatible with the new mode */
|
|
incompatible_clock = false;
|
|
switch (mode) {
|
|
case DIGITAL_MODE_SPDIF_OPTICAL:
|
|
case DIGITAL_MODE_SPDIF_RCA:
|
|
if (chip->input_clock == ECHO_CLOCK_ADAT)
|
|
incompatible_clock = true;
|
|
break;
|
|
case DIGITAL_MODE_ADAT:
|
|
if (chip->input_clock == ECHO_CLOCK_SPDIF)
|
|
incompatible_clock = true;
|
|
break;
|
|
default:
|
|
dev_err(chip->card->dev,
|
|
"Digital mode not supported: %d\n", mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_irq(&chip->lock);
|
|
|
|
if (incompatible_clock) {
|
|
chip->sample_rate = 48000;
|
|
set_input_clock(chip, ECHO_CLOCK_INTERNAL);
|
|
}
|
|
|
|
/* Clear the current digital mode */
|
|
control_reg = le32_to_cpu(chip->comm_page->control_register);
|
|
control_reg &= E3G_DIGITAL_MODE_CLEAR_MASK;
|
|
|
|
/* Tweak the control reg */
|
|
switch (mode) {
|
|
case DIGITAL_MODE_SPDIF_OPTICAL:
|
|
control_reg |= E3G_SPDIF_OPTICAL_MODE;
|
|
break;
|
|
case DIGITAL_MODE_SPDIF_RCA:
|
|
/* E3G_SPDIF_OPTICAL_MODE bit cleared */
|
|
break;
|
|
case DIGITAL_MODE_ADAT:
|
|
control_reg |= E3G_ADAT_MODE;
|
|
control_reg &= ~E3G_DOUBLE_SPEED_MODE; /* @@ useless */
|
|
break;
|
|
}
|
|
|
|
err = write_control_reg(chip, control_reg, get_frq_reg(chip), 1);
|
|
spin_unlock_irq(&chip->lock);
|
|
if (err < 0)
|
|
return err;
|
|
chip->digital_mode = mode;
|
|
|
|
dev_dbg(chip->card->dev, "set_digital_mode(%d)\n", chip->digital_mode);
|
|
return incompatible_clock;
|
|
}
|