acrn-kernel/include/asm-sh/snapgear.h

80 lines
2.3 KiB
C

/*
* include/asm-sh/snapgear/io.h
*
* Modified version of io_se.h for the snapgear-specific functions.
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
* IO functions for a SnapGear
*/
#ifndef _ASM_SH_IO_SNAPGEAR_H
#define _ASM_SH_IO_SNAPGEAR_H
#if defined(CONFIG_CPU_SH4)
/*
* The external interrupt lines, these take up ints 0 - 15 inclusive
* depending on the priority for the interrupt. In fact the priority
* is the interrupt :-)
*/
#define IRL0_IRQ 2
#define IRL0_IPR_ADDR INTC_IPRD
#define IRL0_IPR_POS 3
#define IRL0_PRIORITY 13
#define IRL1_IRQ 5
#define IRL1_IPR_ADDR INTC_IPRD
#define IRL1_IPR_POS 2
#define IRL1_PRIORITY 10
#define IRL2_IRQ 8
#define IRL2_IPR_ADDR INTC_IPRD
#define IRL2_IPR_POS 1
#define IRL2_PRIORITY 7
#define IRL3_IRQ 11
#define IRL3_IPR_ADDR INTC_IPRD
#define IRL3_IPR_POS 0
#define IRL3_PRIORITY 4
#endif
#define __IO_PREFIX snapgear
#include <asm/io_generic.h>
#ifdef CONFIG_SH_SECUREEDGE5410
/*
* We need to remember what was written to the ioport as some bits
* are shared with other functions and you cannot read back what was
* written :-|
*
* Bit Read Write
* -----------------------------------------------
* D0 DCD on ttySC1 power
* D1 Reset Switch heatbeat
* D2 ttySC0 CTS (7100) LAN
* D3 - WAN
* D4 ttySC0 DCD (7100) CONSOLE
* D5 - ONLINE
* D6 - VPN
* D7 - DTR on ttySC1
* D8 - ttySC0 RTS (7100)
* D9 - ttySC0 DTR (7100)
* D10 - RTC SCLK
* D11 RTC DATA RTC DATA
* D12 - RTS RESET
*/
#define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000)
extern unsigned short secureedge5410_ioport;
#define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \
(secureedge5410_ioport = \
((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
#define SECUREEDGE_READ_IOPORT() \
((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
#endif
#endif /* _ASM_SH_IO_SNAPGEAR_H */