acrn-kernel/arch/m68k/atari/hades-pci.c

443 lines
11 KiB
C

/*
* hades-pci.c - Hardware specific PCI BIOS functions the Hades Atari clone.
*
* Written by Wout Klaren.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <asm/io.h>
#if 0
# define DBG_DEVS(args) printk args
#else
# define DBG_DEVS(args)
#endif
#if defined(CONFIG_PCI) && defined(CONFIG_HADES)
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/pci.h>
#include <asm/atarihw.h>
#include <asm/atariints.h>
#include <asm/byteorder.h>
#include <asm/pci.h>
#define HADES_MEM_BASE 0x80000000
#define HADES_MEM_SIZE 0x20000000
#define HADES_CONFIG_BASE 0xA0000000
#define HADES_CONFIG_SIZE 0x10000000
#define HADES_IO_BASE 0xB0000000
#define HADES_IO_SIZE 0x10000000
#define HADES_VIRT_IO_SIZE 0x00010000 /* Only 64k is remapped and actually used. */
#define N_SLOTS 4 /* Number of PCI slots. */
static const char pci_mem_name[] = "PCI memory space";
static const char pci_io_name[] = "PCI I/O space";
static const char pci_config_name[] = "PCI config space";
static struct resource config_space = {
.name = pci_config_name,
.start = HADES_CONFIG_BASE,
.end = HADES_CONFIG_BASE + HADES_CONFIG_SIZE - 1
};
static struct resource io_space = {
.name = pci_io_name,
.start = HADES_IO_BASE,
.end = HADES_IO_BASE + HADES_IO_SIZE - 1
};
static const unsigned long pci_conf_base_phys[] = {
0xA0080000, 0xA0040000, 0xA0020000, 0xA0010000
};
static unsigned long pci_conf_base_virt[N_SLOTS];
static unsigned long pci_io_base_virt;
/*
* static void *mk_conf_addr(unsigned char bus, unsigned char device_fn,
* unsigned char where)
*
* Calculate the address of the PCI configuration area of the given
* device.
*
* BUG: boards with multiple functions are probably not correctly
* supported.
*/
static void *mk_conf_addr(struct pci_dev *dev, int where)
{
int device = dev->devfn >> 3, function = dev->devfn & 7;
void *result;
DBG_DEVS(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, pci_addr=0x%p)\n",
dev->bus->number, dev->devfn, where, pci_addr));
if (device > 3)
{
DBG_DEVS(("mk_conf_addr: device (%d) > 3, returning NULL\n", device));
return NULL;
}
if (dev->bus->number != 0)
{
DBG_DEVS(("mk_conf_addr: bus (%d) > 0, returning NULL\n", device));
return NULL;
}
result = (void *) (pci_conf_base_virt[device] | (function << 8) | (where));
DBG_DEVS(("mk_conf_addr: returning pci_addr 0x%lx\n", (unsigned long) result));
return result;
}
static int hades_read_config_byte(struct pci_dev *dev, int where, u8 *value)
{
volatile unsigned char *pci_addr;
*value = 0xff;
if ((pci_addr = (unsigned char *) mk_conf_addr(dev, where)) == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
*value = *pci_addr;
return PCIBIOS_SUCCESSFUL;
}
static int hades_read_config_word(struct pci_dev *dev, int where, u16 *value)
{
volatile unsigned short *pci_addr;
*value = 0xffff;
if (where & 0x1)
return PCIBIOS_BAD_REGISTER_NUMBER;
if ((pci_addr = (unsigned short *) mk_conf_addr(dev, where)) == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
*value = le16_to_cpu(*pci_addr);
return PCIBIOS_SUCCESSFUL;
}
static int hades_read_config_dword(struct pci_dev *dev, int where, u32 *value)
{
volatile unsigned int *pci_addr;
unsigned char header_type;
int result;
*value = 0xffffffff;
if (where & 0x3)
return PCIBIOS_BAD_REGISTER_NUMBER;
if ((pci_addr = (unsigned int *) mk_conf_addr(dev, where)) == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
*value = le32_to_cpu(*pci_addr);
/*
* Check if the value is an address on the bus. If true, add the
* base address of the PCI memory or PCI I/O area on the Hades.
*/
if ((result = hades_read_config_byte(dev, PCI_HEADER_TYPE,
&header_type)) != PCIBIOS_SUCCESSFUL)
return result;
if (((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_1)) ||
((header_type != PCI_HEADER_TYPE_BRIDGE) && ((where >= PCI_BASE_ADDRESS_2) &&
(where <= PCI_BASE_ADDRESS_5))))
{
if ((*value & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO)
{
/*
* Base address register that contains an I/O address. If the
* address is valid on the Hades (0 <= *value < HADES_VIRT_IO_SIZE),
* add 'pci_io_base_virt' to the value.
*/
if (*value < HADES_VIRT_IO_SIZE)
*value += pci_io_base_virt;
}
else
{
/*
* Base address register that contains an memory address. If the
* address is valid on the Hades (0 <= *value < HADES_MEM_SIZE),
* add HADES_MEM_BASE to the value.
*/
if (*value == 0)
{
/*
* Base address is 0. Test if this base
* address register is used.
*/
*pci_addr = 0xffffffff;
if (*pci_addr != 0)
{
*pci_addr = *value;
if (*value < HADES_MEM_SIZE)
*value += HADES_MEM_BASE;
}
}
else
{
if (*value < HADES_MEM_SIZE)
*value += HADES_MEM_BASE;
}
}
}
return PCIBIOS_SUCCESSFUL;
}
static int hades_write_config_byte(struct pci_dev *dev, int where, u8 value)
{
volatile unsigned char *pci_addr;
if ((pci_addr = (unsigned char *) mk_conf_addr(dev, where)) == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
*pci_addr = value;
return PCIBIOS_SUCCESSFUL;
}
static int hades_write_config_word(struct pci_dev *dev, int where, u16 value)
{
volatile unsigned short *pci_addr;
if ((pci_addr = (unsigned short *) mk_conf_addr(dev, where)) == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
*pci_addr = cpu_to_le16(value);
return PCIBIOS_SUCCESSFUL;
}
static int hades_write_config_dword(struct pci_dev *dev, int where, u32 value)
{
volatile unsigned int *pci_addr;
unsigned char header_type;
int result;
if ((pci_addr = (unsigned int *) mk_conf_addr(dev, where)) == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
/*
* Check if the value is an address on the bus. If true, subtract the
* base address of the PCI memory or PCI I/O area on the Hades.
*/
if ((result = hades_read_config_byte(dev, PCI_HEADER_TYPE,
&header_type)) != PCIBIOS_SUCCESSFUL)
return result;
if (((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_1)) ||
((header_type != PCI_HEADER_TYPE_BRIDGE) && ((where >= PCI_BASE_ADDRESS_2) &&
(where <= PCI_BASE_ADDRESS_5))))
{
if ((value & PCI_BASE_ADDRESS_SPACE) ==
PCI_BASE_ADDRESS_SPACE_IO)
{
/*
* I/O address. Check if the address is valid address on
* the Hades (pci_io_base_virt <= value < pci_io_base_virt +
* HADES_VIRT_IO_SIZE) or if the value is 0xffffffff. If not
* true do not write the base address register. If it is a
* valid base address subtract 'pci_io_base_virt' from the value.
*/
if ((value >= pci_io_base_virt) && (value < (pci_io_base_virt +
HADES_VIRT_IO_SIZE)))
value -= pci_io_base_virt;
else
{
if (value != 0xffffffff)
return PCIBIOS_SET_FAILED;
}
}
else
{
/*
* Memory address. Check if the address is valid address on
* the Hades (HADES_MEM_BASE <= value < HADES_MEM_BASE + HADES_MEM_SIZE) or
* if the value is 0xffffffff. If not true do not write
* the base address register. If it is a valid base address
* subtract HADES_MEM_BASE from the value.
*/
if ((value >= HADES_MEM_BASE) && (value < (HADES_MEM_BASE + HADES_MEM_SIZE)))
value -= HADES_MEM_BASE;
else
{
if (value != 0xffffffff)
return PCIBIOS_SET_FAILED;
}
}
}
*pci_addr = cpu_to_le32(value);
return PCIBIOS_SUCCESSFUL;
}
/*
* static inline void hades_fixup(void)
*
* Assign IRQ numbers as used by Linux to the interrupt pins
* of the PCI cards.
*/
static void __init hades_fixup(int pci_modify)
{
char irq_tab[4] = {
[0] = IRQ_TT_MFP_IO0, /* Slot 0. */
[1] = IRQ_TT_MFP_IO1, /* Slot 1. */
[2] = IRQ_TT_MFP_SCC, /* Slot 2. */
[3] = IRQ_TT_MFP_SCSIDMA /* Slot 3. */
};
struct pci_dev *dev = NULL;
unsigned char slot;
/*
* Go through all devices, fixing up irqs as we see fit:
*/
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL)
{
if (dev->class >> 16 != PCI_BASE_CLASS_BRIDGE)
{
slot = PCI_SLOT(dev->devfn); /* Determine slot number. */
dev->irq = irq_tab[slot];
if (pci_modify)
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
}
}
}
/*
* static void hades_conf_device(struct pci_dev *dev)
*
* Machine dependent Configure the given device.
*
* Parameters:
*
* dev - the pci device.
*/
static void __init hades_conf_device(struct pci_dev *dev)
{
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0);
}
static struct pci_ops hades_pci_ops = {
.read_byte = hades_read_config_byte,
.read_word = hades_read_config_word,
.read_dword = hades_read_config_dword,
.write_byte = hades_write_config_byte,
.write_word = hades_write_config_word,
.write_dword = hades_write_config_dword
};
/*
* struct pci_bus_info *init_hades_pci(void)
*
* Machine specific initialisation:
*
* - Allocate and initialise a 'pci_bus_info' structure
* - Initialise hardware
*
* Result: pointer to 'pci_bus_info' structure.
*/
struct pci_bus_info * __init init_hades_pci(void)
{
struct pci_bus_info *bus;
int i;
/*
* Remap I/O and configuration space.
*/
pci_io_base_virt = (unsigned long) ioremap(HADES_IO_BASE, HADES_VIRT_IO_SIZE);
for (i = 0; i < N_SLOTS; i++)
pci_conf_base_virt[i] = (unsigned long) ioremap(pci_conf_base_phys[i], 0x10000);
/*
* Allocate memory for bus info structure.
*/
bus = kzalloc(sizeof(struct pci_bus_info), GFP_KERNEL);
if (!bus)
return NULL;
/*
* Claim resources. The m68k has no separate I/O space, both
* PCI memory space and PCI I/O space are in memory space. Therefore
* the I/O resources are requested in memory space as well.
*/
if (request_resource(&iomem_resource, &config_space) != 0)
{
kfree(bus);
return NULL;
}
if (request_resource(&iomem_resource, &io_space) != 0)
{
release_resource(&config_space);
kfree(bus);
return NULL;
}
bus->mem_space.start = HADES_MEM_BASE;
bus->mem_space.end = HADES_MEM_BASE + HADES_MEM_SIZE - 1;
bus->mem_space.name = pci_mem_name;
#if 1
if (request_resource(&iomem_resource, &bus->mem_space) != 0)
{
release_resource(&io_space);
release_resource(&config_space);
kfree(bus);
return NULL;
}
#endif
bus->io_space.start = pci_io_base_virt;
bus->io_space.end = pci_io_base_virt + HADES_VIRT_IO_SIZE - 1;
bus->io_space.name = pci_io_name;
#if 1
if (request_resource(&ioport_resource, &bus->io_space) != 0)
{
release_resource(&bus->mem_space);
release_resource(&io_space);
release_resource(&config_space);
kfree(bus);
return NULL;
}
#endif
/*
* Set hardware dependent functions.
*/
bus->m68k_pci_ops = &hades_pci_ops;
bus->fixup = hades_fixup;
bus->conf_device = hades_conf_device;
/*
* Select high to low edge for PCI interrupts.
*/
tt_mfp.active_edge &= ~0x27;
return bus;
}
#endif