OrgACRN
/
acrn-kernel
mirror of https://github.com/projectacrn/acrn-kernel.git
1
0
Fork 0
Code Issues Releases Wiki Activity
acrn-kernel/drivers/media/common/saa7146_core.c

545 lines
14 KiB
C
Raw Blame History

/*
saa7146.o - driver for generic saa7146-based hardware
Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <media/saa7146.h>
LIST_HEAD(saa7146_devices);
DEFINE_MUTEX(saa7146_devices_lock);
static int saa7146_num;
unsigned int saa7146_debug;
module_param(saa7146_debug, int, 0644);
MODULE_PARM_DESC(saa7146_debug, "debug level (default: 0)");
#if 0
static void dump_registers(struct saa7146_dev* dev)
{
int i = 0;
INFO((" @ %li jiffies:\n",jiffies));
for(i = 0; i <= 0x148; i+=4) {
printk("0x%03x: 0x%08x\n",i,saa7146_read(dev,i));
}
}
#endif
/****************************************************************************
* gpio and debi helper functions
****************************************************************************/
void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data)
{
u32 value = 0;
BUG_ON(port > 3);
value = saa7146_read(dev, GPIO_CTRL);
value &= ~(0xff << (8*port));
value |= (data << (8*port));
saa7146_write(dev, GPIO_CTRL, value);
}
/* This DEBI code is based on the saa7146 Stradis driver by Nathan Laredo */
int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop)
{
unsigned long start;
int err;
/* wait for registers to be programmed */
start = jiffies;
while (1) {
err = time_after(jiffies, start + HZ/20);
if (saa7146_read(dev, MC2) & 2)
break;
if (err) {
DEB_S(("timed out while waiting for registers getting programmed\n"));
return -ETIMEDOUT;
}
if (nobusyloop)
msleep(1);
}
/* wait for transfer to complete */
start = jiffies;
while (1) {
err = time_after(jiffies, start + HZ/4);
if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S))
break;
saa7146_read(dev, MC2);
if (err) {
DEB_S(("timed out while waiting for transfer completion\n"));
return -ETIMEDOUT;
}
if (nobusyloop)
msleep(1);
}
return 0;
}
/****************************************************************************
* general helper functions
****************************************************************************/
/* this is videobuf_vmalloc_to_sg() from video-buf.c
make sure virt has been allocated with vmalloc_32(), otherwise the BUG()
may be triggered on highmem machines */
static struct scatterlist* vmalloc_to_sg(unsigned char *virt, int nr_pages)
{
struct scatterlist *sglist;
struct page *pg;
int i;
sglist = kcalloc(nr_pages, sizeof(struct scatterlist), GFP_KERNEL);
if (NULL == sglist)
return NULL;
for (i = 0; i < nr_pages; i++, virt += PAGE_SIZE) {
pg = vmalloc_to_page(virt);
if (NULL == pg)
goto err;
BUG_ON(PageHighMem(pg));
sglist[i].page = pg;
sglist[i].length = PAGE_SIZE;
}
return sglist;
err:
kfree(sglist);
return NULL;
}
/********************************************************************************/
/* common page table functions */
char *saa7146_vmalloc_build_pgtable(struct pci_dev *pci, long length, struct saa7146_pgtable *pt)
{
int pages = (length+PAGE_SIZE-1)/PAGE_SIZE;
char *mem = vmalloc_32(length);
int slen = 0;
if (NULL == mem) {
return NULL;
}
if (!(pt->slist = vmalloc_to_sg(mem, pages))) {
vfree(mem);
return NULL;
}
if (saa7146_pgtable_alloc(pci, pt)) {
kfree(pt->slist);
pt->slist = NULL;
vfree(mem);
return NULL;
}
slen = pci_map_sg(pci,pt->slist,pages,PCI_DMA_FROMDEVICE);
if (0 != saa7146_pgtable_build_single(pci, pt, pt->slist, slen)) {
return NULL;
}
return mem;
}
void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt)
{
if (NULL == pt->cpu)
return;
pci_free_consistent(pci, pt->size, pt->cpu, pt->dma);
pt->cpu = NULL;
kfree(pt->slist);
pt->slist = NULL;
}
int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt)
{
u32 *cpu;
dma_addr_t dma_addr;
cpu = pci_alloc_consistent(pci, PAGE_SIZE, &dma_addr);
if (NULL == cpu) {
return -ENOMEM;
}
pt->size = PAGE_SIZE;
pt->cpu = cpu;
pt->dma = dma_addr;
return 0;
}
int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt,
struct scatterlist *list, int sglen )
{
u32 *ptr, fill;
int nr_pages = 0;
int i,p;
BUG_ON(0 == sglen);
BUG_ON(list->offset > PAGE_SIZE);
/* if we have a user buffer, the first page may not be
aligned to a page boundary. */
pt->offset = list->offset;
ptr = pt->cpu;
for (i = 0; i < sglen; i++, list++) {
/*
printk("i:%d, adr:0x%08x, len:%d, offset:%d\n", i,sg_dma_address(list), sg_dma_len(list), list->offset);
*/
for (p = 0; p * 4096 < list->length; p++, ptr++) {
*ptr = cpu_to_le32(sg_dma_address(list) + p * 4096);
nr_pages++;
}
}
/* safety; fill the page table up with the last valid page */
fill = *(ptr-1);
for(i=nr_pages;i<1024;i++) {
*ptr++ = fill;
}
/*
ptr = pt->cpu;
printk("offset: %d\n",pt->offset);
for(i=0;i<5;i++) {
printk("ptr1 %d: 0x%08x\n",i,ptr[i]);
}
*/
return 0;
}
/********************************************************************************/
/* interrupt handler */
static irqreturn_t interrupt_hw(int irq, void *dev_id, struct pt_regs *regs)
{
struct saa7146_dev *dev = dev_id;
u32 isr = 0;
/* read out the interrupt status register */
isr = saa7146_read(dev, ISR);
/* is this our interrupt? */
if ( 0 == isr ) {
/* nope, some other device */
return IRQ_NONE;
}
saa7146_write(dev, ISR, isr);
if( 0 != (dev->ext)) {
if( 0 != (dev->ext->irq_mask & isr )) {
if( 0 != dev->ext->irq_func ) {
dev->ext->irq_func(dev, &isr);
}
isr &= ~dev->ext->irq_mask;
}
}
if (0 != (isr & (MASK_27))) {
DEB_INT(("irq: RPS0 (0x%08x).\n",isr));
if( 0 != dev->vv_data && 0 != dev->vv_callback) {
dev->vv_callback(dev,isr);
}
isr &= ~MASK_27;
}
if (0 != (isr & (MASK_28))) {
if( 0 != dev->vv_data && 0 != dev->vv_callback) {
dev->vv_callback(dev,isr);
}
isr &= ~MASK_28;
}
if (0 != (isr & (MASK_16|MASK_17))) {
u32 status = saa7146_read(dev, I2C_STATUS);
if( (0x3 == (status & 0x3)) || (0 == (status & 0x1)) ) {
SAA7146_IER_DISABLE(dev, MASK_16|MASK_17);
/* only wake up if we expect something */
if( 0 != dev->i2c_op ) {
u32 psr = (saa7146_read(dev, PSR) >> 16) & 0x2;
u32 ssr = (saa7146_read(dev, SSR) >> 17) & 0x1f;
DEB_I2C(("irq: i2c, status: 0x%08x, psr:0x%02x, ssr:0x%02x).\n",status,psr,ssr));
dev->i2c_op = 0;
wake_up(&dev->i2c_wq);
} else {
DEB_I2C(("unexpected irq: i2c, status: 0x%08x, isr %#x\n",status, isr));
}
} else {
DEB_I2C(("unhandled irq: i2c, status: 0x%08x, isr %#x\n",status, isr));
}
isr &= ~(MASK_16|MASK_17);
}
if( 0 != isr ) {
ERR(("warning: interrupt enabled, but not handled properly.(0x%08x)\n",isr));
ERR(("disabling interrupt source(s)!\n"));
SAA7146_IER_DISABLE(dev,isr);
}
return IRQ_HANDLED;
}
/*********************************************************************************/
/* configuration-functions */
static int saa7146_init_one(struct pci_dev *pci, const struct pci_device_id *ent)
{
struct saa7146_pci_extension_data *pci_ext = (struct saa7146_pci_extension_data *)ent->driver_data;
struct saa7146_extension *ext = pci_ext->ext;
struct saa7146_dev *dev;
int err = -ENOMEM;
/* clear out mem for sure */
dev = kzalloc(sizeof(struct saa7146_dev), GFP_KERNEL);
if (!dev) {
ERR(("out of memory.\n"));
goto out;
}
DEB_EE(("pci:%p\n",pci));
err = pci_enable_device(pci);
if (err < 0) {
ERR(("pci_enable_device() failed.\n"));
goto err_free;
}
/* enable bus-mastering */
pci_set_master(pci);
dev->pci = pci;
/* get chip-revision; this is needed to enable bug-fixes */
err = pci_read_config_dword(pci, PCI_CLASS_REVISION, &dev->revision);
if (err < 0) {
ERR(("pci_read_config_dword() failed.\n"));
goto err_disable;
}
dev->revision &= 0xf;
/* remap the memory from virtual to physical adress */
err = pci_request_region(pci, 0, "saa7146");
if (err < 0)
goto err_disable;
dev->mem = ioremap(pci_resource_start(pci, 0),
pci_resource_len(pci, 0));
if (!dev->mem) {
ERR(("ioremap() failed.\n"));
err = -ENODEV;
goto err_release;
}
/* we don't do a master reset here anymore, it screws up
some boards that don't have an i2c-eeprom for configuration
values */
/*
saa7146_write(dev, MC1, MASK_31);
*/
/* disable all irqs */
saa7146_write(dev, IER, 0);
/* shut down all dma transfers and rps tasks */
saa7146_write(dev, MC1, 0x30ff0000);
/* clear out any rps-signals pending */
saa7146_write(dev, MC2, 0xf8000000);
/* request an interrupt for the saa7146 */
err = request_irq(pci->irq, interrupt_hw, SA_SHIRQ | SA_INTERRUPT,
dev->name, dev);
if (err < 0) {
ERR(("request_irq() failed.\n"));
goto err_unmap;
}
err = -ENOMEM;
/* get memory for various stuff */
dev->d_rps0.cpu_addr = pci_alloc_consistent(pci, SAA7146_RPS_MEM,
&dev->d_rps0.dma_handle);
if (!dev->d_rps0.cpu_addr)
goto err_free_irq;
memset(dev->d_rps0.cpu_addr, 0x0, SAA7146_RPS_MEM);
dev->d_rps1.cpu_addr = pci_alloc_consistent(pci, SAA7146_RPS_MEM,
&dev->d_rps1.dma_handle);
if (!dev->d_rps1.cpu_addr)
goto err_free_rps0;
memset(dev->d_rps1.cpu_addr, 0x0, SAA7146_RPS_MEM);
dev->d_i2c.cpu_addr = pci_alloc_consistent(pci, SAA7146_RPS_MEM,
&dev->d_i2c.dma_handle);
if (!dev->d_i2c.cpu_addr)
goto err_free_rps1;
memset(dev->d_i2c.cpu_addr, 0x0, SAA7146_RPS_MEM);
/* the rest + print status message */
/* create a nice device name */
sprintf(dev->name, "saa7146 (%d)", saa7146_num);
INFO(("found saa7146 @ mem %p (revision %d, irq %d) (0x%04x,0x%04x).\n", dev->mem, dev->revision, pci->irq, pci->subsystem_vendor, pci->subsystem_device));
dev->ext = ext;
pci_set_drvdata(pci, dev);
mutex_init(&dev->lock);
spin_lock_init(&dev->int_slock);
spin_lock_init(&dev->slock);
mutex_init(&dev->i2c_lock);
dev->module = THIS_MODULE;
init_waitqueue_head(&dev->i2c_wq);
/* set some sane pci arbitrition values */
saa7146_write(dev, PCI_BT_V1, 0x1c00101f);
/* TODO: use the status code of the callback */
err = -ENODEV;
if (ext->probe && ext->probe(dev)) {
DEB_D(("ext->probe() failed for %p. skipping device.\n",dev));
goto err_free_i2c;
}
if (ext->attach(dev, pci_ext)) {
DEB_D(("ext->attach() failed for %p. skipping device.\n",dev));
goto err_unprobe;
}
INIT_LIST_HEAD(&dev->item);
list_add_tail(&dev->item,&saa7146_devices);
saa7146_num++;
err = 0;
out:
return err;
err_unprobe:
pci_set_drvdata(pci, NULL);
err_free_i2c:
pci_free_consistent(pci, SAA7146_RPS_MEM, dev->d_i2c.cpu_addr,
dev->d_i2c.dma_handle);
err_free_rps1:
pci_free_consistent(pci, SAA7146_RPS_MEM, dev->d_rps1.cpu_addr,
dev->d_rps1.dma_handle);
err_free_rps0:
pci_free_consistent(pci, SAA7146_RPS_MEM, dev->d_rps0.cpu_addr,
dev->d_rps0.dma_handle);
err_free_irq:
free_irq(pci->irq, (void *)dev);
err_unmap:
iounmap(dev->mem);
err_release:
pci_release_region(pci, 0);
err_disable:
pci_disable_device(pci);
err_free:
kfree(dev);
goto out;
}
static void saa7146_remove_one(struct pci_dev *pdev)
{
struct saa7146_dev* dev = pci_get_drvdata(pdev);
struct {
void *addr;
dma_addr_t dma;
} dev_map[] = {
{ dev->d_i2c.cpu_addr, dev->d_i2c.dma_handle },
{ dev->d_rps1.cpu_addr, dev->d_rps1.dma_handle },
{ dev->d_rps0.cpu_addr, dev->d_rps0.dma_handle },
{ NULL, 0 }
}, *p;
DEB_EE(("dev:%p\n",dev));
dev->ext->detach(dev);
/* shut down all video dma transfers */
saa7146_write(dev, MC1, 0x00ff0000);
/* disable all irqs, release irq-routine */
saa7146_write(dev, IER, 0);
free_irq(pdev->irq, dev);
for (p = dev_map; p->addr; p++)
pci_free_consistent(pdev, SAA7146_RPS_MEM, p->addr, p->dma);
iounmap(dev->mem);
pci_release_region(pdev, 0);
list_del(&dev->item);
pci_disable_device(pdev);
kfree(dev);
saa7146_num--;
}
/*********************************************************************************/
/* extension handling functions */
int saa7146_register_extension(struct saa7146_extension* ext)
{
DEB_EE(("ext:%p\n",ext));
ext->driver.name = ext->name;
ext->driver.id_table = ext->pci_tbl;
ext->driver.probe = saa7146_init_one;
ext->driver.remove = saa7146_remove_one;
printk("saa7146: register extension '%s'.\n",ext->name);
return pci_register_driver(&ext->driver);
}
int saa7146_unregister_extension(struct saa7146_extension* ext)
{
DEB_EE(("ext:%p\n",ext));
printk("saa7146: unregister extension '%s'.\n",ext->name);
pci_unregister_driver(&ext->driver);
return 0;
}
EXPORT_SYMBOL_GPL(saa7146_register_extension);
EXPORT_SYMBOL_GPL(saa7146_unregister_extension);
/* misc functions used by extension modules */
EXPORT_SYMBOL_GPL(saa7146_pgtable_alloc);
EXPORT_SYMBOL_GPL(saa7146_pgtable_free);
EXPORT_SYMBOL_GPL(saa7146_pgtable_build_single);
EXPORT_SYMBOL_GPL(saa7146_vmalloc_build_pgtable);
EXPORT_SYMBOL_GPL(saa7146_wait_for_debi_done);
EXPORT_SYMBOL_GPL(saa7146_setgpio);
EXPORT_SYMBOL_GPL(saa7146_i2c_transfer);
EXPORT_SYMBOL_GPL(saa7146_i2c_adapter_prepare);
EXPORT_SYMBOL_GPL(saa7146_debug);
EXPORT_SYMBOL_GPL(saa7146_devices);
EXPORT_SYMBOL_GPL(saa7146_devices_lock);
MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
MODULE_DESCRIPTION("driver for generic saa7146-based hardware");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink