105 lines
2.8 KiB
YAML
105 lines
2.8 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/gpio/brcm,brcmstb-gpio.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Broadcom STB "UPG GIO" GPIO controller
|
|
|
|
description: >
|
|
The controller's registers are organized as sets of eight 32-bit
|
|
registers with each set controlling a bank of up to 32 pins. A single
|
|
interrupt is shared for all of the banks handled by the controller.
|
|
|
|
maintainers:
|
|
- Doug Berger <opendmb@gmail.com>
|
|
- Florian Fainelli <f.fainelli@gmail.com>
|
|
|
|
properties:
|
|
compatible:
|
|
items:
|
|
- enum:
|
|
- brcm,bcm7445-gpio
|
|
- const: brcm,brcmstb-gpio
|
|
|
|
reg:
|
|
maxItems: 1
|
|
description: >
|
|
Define the base and range of the I/O address space containing
|
|
the brcmstb GPIO controller registers
|
|
|
|
"#gpio-cells":
|
|
const: 2
|
|
description: >
|
|
The first cell is the pin number (within the controller's
|
|
pin space), and the second is used for the following:
|
|
bit[0]: polarity (0 for active-high, 1 for active-low)
|
|
|
|
gpio-controller: true
|
|
|
|
brcm,gpio-bank-widths:
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
description: >
|
|
Number of GPIO lines for each bank. Number of elements must
|
|
correspond to number of banks suggested by the 'reg' property.
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
description: >
|
|
The interrupt shared by all GPIO lines for this controller.
|
|
|
|
"#interrupt-cells":
|
|
const: 2
|
|
description: |
|
|
The first cell is the GPIO number, the second should specify
|
|
flags. The following subset of flags is supported:
|
|
- bits[3:0] trigger type and level flags
|
|
1 = low-to-high edge triggered
|
|
2 = high-to-low edge triggered
|
|
4 = active high level-sensitive
|
|
8 = active low level-sensitive
|
|
Valid combinations are 1, 2, 3, 4, 8.
|
|
|
|
interrupt-controller: true
|
|
|
|
wakeup-source:
|
|
type: boolean
|
|
description: >
|
|
GPIOs for this controller can be used as a wakeup source
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- gpio-controller
|
|
- "#gpio-cells"
|
|
- "brcm,gpio-bank-widths"
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
upg_gio: gpio@f040a700 {
|
|
#gpio-cells = <2>;
|
|
#interrupt-cells = <2>;
|
|
compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
reg = <0xf040a700 0x80>;
|
|
interrupt-parent = <&irq0_intc>;
|
|
interrupts = <0x6>;
|
|
brcm,gpio-bank-widths = <32 32 32 24>;
|
|
};
|
|
|
|
upg_gio_aon: gpio@f04172c0 {
|
|
#gpio-cells = <2>;
|
|
#interrupt-cells = <2>;
|
|
compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
reg = <0xf04172c0 0x40>;
|
|
interrupt-parent = <&irq0_aon_intc>;
|
|
interrupts = <0x6>;
|
|
wakeup-source;
|
|
brcm,gpio-bank-widths = <18 4>;
|
|
};
|