acrn-kernel/arch/ppc/boot/common/ns16550.c

104 lines
2.4 KiB
C

/*
* COM1 NS16550 support
*/
#include <linux/types.h>
#include <linux/serial.h>
#include <linux/serial_reg.h>
#include <asm/serial.h>
#if defined(CONFIG_XILINX_VIRTEX)
#include <platforms/4xx/xparameters/xparameters.h>
#endif
#include "nonstdio.h"
#include "serial.h"
#define SERIAL_BAUD 9600
extern unsigned long ISA_io;
static struct serial_state rs_table[RS_TABLE_SIZE] = {
SERIAL_PORT_DFNS /* Defined in <asm/serial.h> */
};
static int shift;
unsigned long serial_init(int chan, void *ignored)
{
unsigned long com_port, base_baud;
unsigned char lcr, dlm;
/* We need to find out which type io we're expecting. If it's
* 'SERIAL_IO_PORT', we get an offset from the isa_io_base.
* If it's 'SERIAL_IO_MEM', we can the exact location. -- Tom */
switch (rs_table[chan].io_type) {
case SERIAL_IO_PORT:
com_port = rs_table[chan].port;
break;
case SERIAL_IO_MEM:
com_port = (unsigned long)rs_table[chan].iomem_base;
break;
default:
/* We can't deal with it. */
return -1;
}
/* How far apart the registers are. */
shift = rs_table[chan].iomem_reg_shift;
/* Base baud.. */
base_baud = rs_table[chan].baud_base;
/* save the LCR */
lcr = inb(com_port + (UART_LCR << shift));
/* Access baud rate */
outb(com_port + (UART_LCR << shift), 0x80);
dlm = inb(com_port + (UART_DLM << shift));
/*
* Test if serial port is unconfigured.
* We assume that no-one uses less than 110 baud or
* less than 7 bits per character these days.
* -- paulus.
*/
if ((dlm <= 4) && (lcr & 2))
/* port is configured, put the old LCR back */
outb(com_port + (UART_LCR << shift), lcr);
else {
/* Input clock. */
outb(com_port + (UART_DLL << shift),
(base_baud / SERIAL_BAUD) & 0xFF);
outb(com_port + (UART_DLM << shift),
(base_baud / SERIAL_BAUD) >> 8);
/* 8 data, 1 stop, no parity */
outb(com_port + (UART_LCR << shift), 0x03);
/* RTS/DTR */
outb(com_port + (UART_MCR << shift), 0x03);
}
/* Clear & enable FIFOs */
outb(com_port + (UART_FCR << shift), 0x07);
return (com_port);
}
void
serial_putc(unsigned long com_port, unsigned char c)
{
while ((inb(com_port + (UART_LSR << shift)) & UART_LSR_THRE) == 0)
;
outb(com_port, c);
}
unsigned char
serial_getc(unsigned long com_port)
{
while ((inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) == 0)
;
return inb(com_port);
}
int
serial_tstc(unsigned long com_port)
{
return ((inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) != 0);
}