acrn-kernel/arch/mips/txx9/rbtx4938/irq.c

165 lines
4.2 KiB
C

/*
* Toshiba RBTX4938 specific interrupt handlers
* Copyright (C) 2000-2001 Toshiba Corporation
*
* 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
* terms of the GNU General Public License version 2. This program is
* licensed "as is" without any warranty of any kind, whether express
* or implied.
*
* Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
*/
/*
* MIPS_CPU_IRQ_BASE+00 Software 0
* MIPS_CPU_IRQ_BASE+01 Software 1
* MIPS_CPU_IRQ_BASE+02 Cascade TX4938-CP0
* MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
* MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
* MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
* MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
* MIPS_CPU_IRQ_BASE+07 CPU TIMER
*
* TXX9_IRQ_BASE+00
* TXX9_IRQ_BASE+01
* TXX9_IRQ_BASE+02 Cascade RBTX4938-IOC
* TXX9_IRQ_BASE+03 RBTX4938 RTL-8019AS Ethernet
* TXX9_IRQ_BASE+04
* TXX9_IRQ_BASE+05 TX4938 ETH1
* TXX9_IRQ_BASE+06 TX4938 ETH0
* TXX9_IRQ_BASE+07
* TXX9_IRQ_BASE+08 TX4938 SIO 0
* TXX9_IRQ_BASE+09 TX4938 SIO 1
* TXX9_IRQ_BASE+10 TX4938 DMA0
* TXX9_IRQ_BASE+11 TX4938 DMA1
* TXX9_IRQ_BASE+12 TX4938 DMA2
* TXX9_IRQ_BASE+13 TX4938 DMA3
* TXX9_IRQ_BASE+14
* TXX9_IRQ_BASE+15
* TXX9_IRQ_BASE+16 TX4938 PCIC
* TXX9_IRQ_BASE+17 TX4938 TMR0
* TXX9_IRQ_BASE+18 TX4938 TMR1
* TXX9_IRQ_BASE+19 TX4938 TMR2
* TXX9_IRQ_BASE+20
* TXX9_IRQ_BASE+21
* TXX9_IRQ_BASE+22 TX4938 PCIERR
* TXX9_IRQ_BASE+23
* TXX9_IRQ_BASE+24
* TXX9_IRQ_BASE+25
* TXX9_IRQ_BASE+26
* TXX9_IRQ_BASE+27
* TXX9_IRQ_BASE+28
* TXX9_IRQ_BASE+29
* TXX9_IRQ_BASE+30
* TXX9_IRQ_BASE+31 TX4938 SPI
*
* RBTX4938_IRQ_IOC+00 PCI-D
* RBTX4938_IRQ_IOC+01 PCI-C
* RBTX4938_IRQ_IOC+02 PCI-B
* RBTX4938_IRQ_IOC+03 PCI-A
* RBTX4938_IRQ_IOC+04 RTC
* RBTX4938_IRQ_IOC+05 ATA
* RBTX4938_IRQ_IOC+06 MODEM
* RBTX4938_IRQ_IOC+07 SWINT
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mipsregs.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/rbtx4938.h>
static void toshiba_rbtx4938_irq_ioc_enable(unsigned int irq);
static void toshiba_rbtx4938_irq_ioc_disable(unsigned int irq);
#define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC"
static struct irq_chip toshiba_rbtx4938_irq_ioc_type = {
.name = TOSHIBA_RBTX4938_IOC_NAME,
.ack = toshiba_rbtx4938_irq_ioc_disable,
.mask = toshiba_rbtx4938_irq_ioc_disable,
.mask_ack = toshiba_rbtx4938_irq_ioc_disable,
.unmask = toshiba_rbtx4938_irq_ioc_enable,
};
static int toshiba_rbtx4938_irq_nested(int sw_irq)
{
u8 level3;
level3 = readb(rbtx4938_imstat_addr);
if (unlikely(!level3))
return -1;
/* must use fls so onboard ATA has priority */
return RBTX4938_IRQ_IOC + __fls8(level3);
}
static void __init
toshiba_rbtx4938_irq_ioc_init(void)
{
int i;
for (i = RBTX4938_IRQ_IOC;
i < RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC; i++)
set_irq_chip_and_handler(i, &toshiba_rbtx4938_irq_ioc_type,
handle_level_irq);
set_irq_chained_handler(RBTX4938_IRQ_IOCINT, handle_simple_irq);
}
static void
toshiba_rbtx4938_irq_ioc_enable(unsigned int irq)
{
unsigned char v;
v = readb(rbtx4938_imask_addr);
v |= (1 << (irq - RBTX4938_IRQ_IOC));
writeb(v, rbtx4938_imask_addr);
mmiowb();
}
static void
toshiba_rbtx4938_irq_ioc_disable(unsigned int irq)
{
unsigned char v;
v = readb(rbtx4938_imask_addr);
v &= ~(1 << (irq - RBTX4938_IRQ_IOC));
writeb(v, rbtx4938_imask_addr);
mmiowb();
}
static int rbtx4938_irq_dispatch(int pending)
{
int irq;
if (pending & STATUSF_IP7)
irq = MIPS_CPU_IRQ_BASE + 7;
else if (pending & STATUSF_IP2) {
irq = txx9_irq();
if (irq == RBTX4938_IRQ_IOCINT)
irq = toshiba_rbtx4938_irq_nested(irq);
} else if (pending & STATUSF_IP1)
irq = MIPS_CPU_IRQ_BASE + 0;
else if (pending & STATUSF_IP0)
irq = MIPS_CPU_IRQ_BASE + 1;
else
irq = -1;
return irq;
}
void __init rbtx4938_irq_setup(void)
{
txx9_irq_dispatch = rbtx4938_irq_dispatch;
/* Now, interrupt control disabled, */
/* all IRC interrupts are masked, */
/* all IRC interrupt mode are Low Active. */
/* mask all IOC interrupts */
writeb(0, rbtx4938_imask_addr);
/* clear SoftInt interrupts */
writeb(0, rbtx4938_softint_addr);
tx4938_irq_init();
toshiba_rbtx4938_irq_ioc_init();
/* Onboard 10M Ether: High Active */
set_irq_type(RBTX4938_IRQ_ETHER, IRQF_TRIGGER_HIGH);
}