784 lines
19 KiB
C
784 lines
19 KiB
C
/*
|
|
* Copyright (C) 2009 Renesas Solutions Corp.
|
|
*
|
|
* Kuninori Morimoto <morimoto.kuninori@renesas.com>
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/usb/r8a66597.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c/tsc2007.h>
|
|
#include <linux/input.h>
|
|
#include <video/sh_mobile_lcdc.h>
|
|
#include <media/sh_mobile_ceu.h>
|
|
#include <asm/heartbeat.h>
|
|
#include <asm/sh_eth.h>
|
|
#include <asm/sh_keysc.h>
|
|
#include <asm/clock.h>
|
|
#include <cpu/sh7724.h>
|
|
|
|
/*
|
|
* Address Interface BusWidth
|
|
*-----------------------------------------
|
|
* 0x0000_0000 uboot 16bit
|
|
* 0x0004_0000 Linux romImage 16bit
|
|
* 0x0014_0000 MTD for Linux 16bit
|
|
* 0x0400_0000 Internal I/O 16/32bit
|
|
* 0x0800_0000 DRAM 32bit
|
|
* 0x1800_0000 MFI 16bit
|
|
*/
|
|
|
|
/* SWITCH
|
|
*------------------------------
|
|
* DS2[1] = FlashROM write protect ON : write protect
|
|
* OFF : No write protect
|
|
* DS2[2] = RMII / TS, SCIF ON : RMII
|
|
* OFF : TS, SCIF3
|
|
* DS2[3] = Camera / Video ON : Camera
|
|
* OFF : NTSC/PAL (IN)
|
|
* DS2[5] = NTSC_OUT Clock ON : On board OSC
|
|
* OFF : SH7724 DV_CLK
|
|
* DS2[6-7] = MMC / SD ON-OFF : SD
|
|
* OFF-ON : MMC
|
|
*/
|
|
|
|
/* Heartbeat */
|
|
static unsigned char led_pos[] = { 0, 1, 2, 3 };
|
|
static struct heartbeat_data heartbeat_data = {
|
|
.regsize = 8,
|
|
.nr_bits = 4,
|
|
.bit_pos = led_pos,
|
|
};
|
|
|
|
static struct resource heartbeat_resources[] = {
|
|
[0] = {
|
|
.start = 0xA405012C, /* PTG */
|
|
.end = 0xA405012E - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device heartbeat_device = {
|
|
.name = "heartbeat",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &heartbeat_data,
|
|
},
|
|
.num_resources = ARRAY_SIZE(heartbeat_resources),
|
|
.resource = heartbeat_resources,
|
|
};
|
|
|
|
/* MTD */
|
|
static struct mtd_partition nor_flash_partitions[] = {
|
|
{
|
|
.name = "boot loader",
|
|
.offset = 0,
|
|
.size = (5 * 1024 * 1024),
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
}, {
|
|
.name = "free-area",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
},
|
|
};
|
|
|
|
static struct physmap_flash_data nor_flash_data = {
|
|
.width = 2,
|
|
.parts = nor_flash_partitions,
|
|
.nr_parts = ARRAY_SIZE(nor_flash_partitions),
|
|
};
|
|
|
|
static struct resource nor_flash_resources[] = {
|
|
[0] = {
|
|
.name = "NOR Flash",
|
|
.start = 0x00000000,
|
|
.end = 0x03ffffff,
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
static struct platform_device nor_flash_device = {
|
|
.name = "physmap-flash",
|
|
.resource = nor_flash_resources,
|
|
.num_resources = ARRAY_SIZE(nor_flash_resources),
|
|
.dev = {
|
|
.platform_data = &nor_flash_data,
|
|
},
|
|
};
|
|
|
|
/* SH Eth */
|
|
#define SH_ETH_ADDR (0xA4600000)
|
|
#define SH_ETH_MAHR (SH_ETH_ADDR + 0x1C0)
|
|
#define SH_ETH_MALR (SH_ETH_ADDR + 0x1C8)
|
|
static struct resource sh_eth_resources[] = {
|
|
[0] = {
|
|
.start = SH_ETH_ADDR,
|
|
.end = SH_ETH_ADDR + 0x1FC,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = 91,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
|
|
},
|
|
};
|
|
|
|
struct sh_eth_plat_data sh_eth_plat = {
|
|
.phy = 0x1f, /* SMSC LAN8700 */
|
|
.edmac_endian = EDMAC_LITTLE_ENDIAN,
|
|
.ether_link_active_low = 1
|
|
};
|
|
|
|
static struct platform_device sh_eth_device = {
|
|
.name = "sh-eth",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &sh_eth_plat,
|
|
},
|
|
.num_resources = ARRAY_SIZE(sh_eth_resources),
|
|
.resource = sh_eth_resources,
|
|
.archdata = {
|
|
.hwblk_id = HWBLK_ETHER,
|
|
},
|
|
};
|
|
|
|
/* USB0 host */
|
|
void usb0_port_power(int port, int power)
|
|
{
|
|
gpio_set_value(GPIO_PTB4, power);
|
|
}
|
|
|
|
static struct r8a66597_platdata usb0_host_data = {
|
|
.on_chip = 1,
|
|
.port_power = usb0_port_power,
|
|
};
|
|
|
|
static struct resource usb0_host_resources[] = {
|
|
[0] = {
|
|
.start = 0xa4d80000,
|
|
.end = 0xa4d80124 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = 65,
|
|
.end = 65,
|
|
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
|
|
},
|
|
};
|
|
|
|
static struct platform_device usb0_host_device = {
|
|
.name = "r8a66597_hcd",
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = NULL, /* not use dma */
|
|
.coherent_dma_mask = 0xffffffff,
|
|
.platform_data = &usb0_host_data,
|
|
},
|
|
.num_resources = ARRAY_SIZE(usb0_host_resources),
|
|
.resource = usb0_host_resources,
|
|
};
|
|
|
|
/* USB1 host/function */
|
|
void usb1_port_power(int port, int power)
|
|
{
|
|
gpio_set_value(GPIO_PTB5, power);
|
|
}
|
|
|
|
static struct r8a66597_platdata usb1_common_data = {
|
|
.on_chip = 1,
|
|
.port_power = usb1_port_power,
|
|
};
|
|
|
|
static struct resource usb1_common_resources[] = {
|
|
[0] = {
|
|
.start = 0xa4d90000,
|
|
.end = 0xa4d90124 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = 66,
|
|
.end = 66,
|
|
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
|
|
},
|
|
};
|
|
|
|
static struct platform_device usb1_common_device = {
|
|
/* .name will be added in arch_setup */
|
|
.id = 1,
|
|
.dev = {
|
|
.dma_mask = NULL, /* not use dma */
|
|
.coherent_dma_mask = 0xffffffff,
|
|
.platform_data = &usb1_common_data,
|
|
},
|
|
.num_resources = ARRAY_SIZE(usb1_common_resources),
|
|
.resource = usb1_common_resources,
|
|
};
|
|
|
|
/* LCDC */
|
|
static struct sh_mobile_lcdc_info lcdc_info = {
|
|
.ch[0] = {
|
|
.interface_type = RGB18,
|
|
.chan = LCDC_CHAN_MAINLCD,
|
|
.bpp = 16,
|
|
.lcd_cfg = {
|
|
.sync = 0, /* hsync and vsync are active low */
|
|
},
|
|
.lcd_size_cfg = { /* 7.0 inch */
|
|
.width = 152,
|
|
.height = 91,
|
|
},
|
|
.board_cfg = {
|
|
},
|
|
}
|
|
};
|
|
|
|
static struct resource lcdc_resources[] = {
|
|
[0] = {
|
|
.name = "LCDC",
|
|
.start = 0xfe940000,
|
|
.end = 0xfe942fff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = 106,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device lcdc_device = {
|
|
.name = "sh_mobile_lcdc_fb",
|
|
.num_resources = ARRAY_SIZE(lcdc_resources),
|
|
.resource = lcdc_resources,
|
|
.dev = {
|
|
.platform_data = &lcdc_info,
|
|
},
|
|
.archdata = {
|
|
.hwblk_id = HWBLK_LCDC,
|
|
},
|
|
};
|
|
|
|
/* CEU0 */
|
|
static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
|
|
.flags = SH_CEU_FLAG_USE_8BIT_BUS,
|
|
};
|
|
|
|
static struct resource ceu0_resources[] = {
|
|
[0] = {
|
|
.name = "CEU0",
|
|
.start = 0xfe910000,
|
|
.end = 0xfe91009f,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = 52,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[2] = {
|
|
/* place holder for contiguous memory */
|
|
},
|
|
};
|
|
|
|
static struct platform_device ceu0_device = {
|
|
.name = "sh_mobile_ceu",
|
|
.id = 0, /* "ceu0" clock */
|
|
.num_resources = ARRAY_SIZE(ceu0_resources),
|
|
.resource = ceu0_resources,
|
|
.dev = {
|
|
.platform_data = &sh_mobile_ceu0_info,
|
|
},
|
|
.archdata = {
|
|
.hwblk_id = HWBLK_CEU0,
|
|
},
|
|
};
|
|
|
|
/* CEU1 */
|
|
static struct sh_mobile_ceu_info sh_mobile_ceu1_info = {
|
|
.flags = SH_CEU_FLAG_USE_8BIT_BUS,
|
|
};
|
|
|
|
static struct resource ceu1_resources[] = {
|
|
[0] = {
|
|
.name = "CEU1",
|
|
.start = 0xfe914000,
|
|
.end = 0xfe91409f,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = 63,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[2] = {
|
|
/* place holder for contiguous memory */
|
|
},
|
|
};
|
|
|
|
static struct platform_device ceu1_device = {
|
|
.name = "sh_mobile_ceu",
|
|
.id = 1, /* "ceu1" clock */
|
|
.num_resources = ARRAY_SIZE(ceu1_resources),
|
|
.resource = ceu1_resources,
|
|
.dev = {
|
|
.platform_data = &sh_mobile_ceu1_info,
|
|
},
|
|
.archdata = {
|
|
.hwblk_id = HWBLK_CEU1,
|
|
},
|
|
};
|
|
|
|
/* I2C device */
|
|
static struct i2c_board_info i2c1_devices[] = {
|
|
{
|
|
I2C_BOARD_INFO("r2025sd", 0x32),
|
|
},
|
|
};
|
|
|
|
/* KEYSC */
|
|
static struct sh_keysc_info keysc_info = {
|
|
.mode = SH_KEYSC_MODE_1,
|
|
.scan_timing = 3,
|
|
.delay = 50,
|
|
.kycr2_delay = 100,
|
|
.keycodes = { KEY_1, 0, 0, 0, 0,
|
|
KEY_2, 0, 0, 0, 0,
|
|
KEY_3, 0, 0, 0, 0,
|
|
KEY_4, 0, 0, 0, 0,
|
|
KEY_5, 0, 0, 0, 0,
|
|
KEY_6, 0, 0, 0, 0, },
|
|
};
|
|
|
|
static struct resource keysc_resources[] = {
|
|
[0] = {
|
|
.name = "KEYSC",
|
|
.start = 0x044b0000,
|
|
.end = 0x044b000f,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = 79,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device keysc_device = {
|
|
.name = "sh_keysc",
|
|
.id = 0, /* keysc0 clock */
|
|
.num_resources = ARRAY_SIZE(keysc_resources),
|
|
.resource = keysc_resources,
|
|
.dev = {
|
|
.platform_data = &keysc_info,
|
|
},
|
|
.archdata = {
|
|
.hwblk_id = HWBLK_KEYSC,
|
|
},
|
|
};
|
|
|
|
/* TouchScreen */
|
|
#define IRQ0 32
|
|
static int ts_get_pendown_state(void)
|
|
{
|
|
int val = 0;
|
|
gpio_free(GPIO_FN_INTC_IRQ0);
|
|
gpio_request(GPIO_PTZ0, NULL);
|
|
gpio_direction_input(GPIO_PTZ0);
|
|
|
|
val = gpio_get_value(GPIO_PTZ0);
|
|
|
|
gpio_free(GPIO_PTZ0);
|
|
gpio_request(GPIO_FN_INTC_IRQ0, NULL);
|
|
|
|
return val ? 0 : 1;
|
|
}
|
|
|
|
static int ts_init(void)
|
|
{
|
|
gpio_request(GPIO_FN_INTC_IRQ0, NULL);
|
|
return 0;
|
|
}
|
|
|
|
struct tsc2007_platform_data tsc2007_info = {
|
|
.model = 2007,
|
|
.x_plate_ohms = 180,
|
|
.get_pendown_state = ts_get_pendown_state,
|
|
.init_platform_hw = ts_init,
|
|
};
|
|
|
|
static struct i2c_board_info ts_i2c_clients = {
|
|
I2C_BOARD_INFO("tsc2007", 0x48),
|
|
.type = "tsc2007",
|
|
.platform_data = &tsc2007_info,
|
|
.irq = IRQ0,
|
|
};
|
|
|
|
/* SHDI0 */
|
|
static struct resource sdhi0_resources[] = {
|
|
[0] = {
|
|
.name = "SDHI0",
|
|
.start = 0x04ce0000,
|
|
.end = 0x04ce01ff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = 101,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device sdhi0_device = {
|
|
.name = "sh_mobile_sdhi",
|
|
.num_resources = ARRAY_SIZE(sdhi0_resources),
|
|
.resource = sdhi0_resources,
|
|
.id = 0,
|
|
.archdata = {
|
|
.hwblk_id = HWBLK_SDHI0,
|
|
},
|
|
};
|
|
|
|
/* SHDI1 */
|
|
static struct resource sdhi1_resources[] = {
|
|
[0] = {
|
|
.name = "SDHI1",
|
|
.start = 0x04cf0000,
|
|
.end = 0x04cf01ff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = 24,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device sdhi1_device = {
|
|
.name = "sh_mobile_sdhi",
|
|
.num_resources = ARRAY_SIZE(sdhi1_resources),
|
|
.resource = sdhi1_resources,
|
|
.id = 1,
|
|
.archdata = {
|
|
.hwblk_id = HWBLK_SDHI1,
|
|
},
|
|
};
|
|
|
|
static struct platform_device *ecovec_devices[] __initdata = {
|
|
&heartbeat_device,
|
|
&nor_flash_device,
|
|
&sh_eth_device,
|
|
&usb0_host_device,
|
|
&usb1_common_device,
|
|
&lcdc_device,
|
|
&ceu0_device,
|
|
&ceu1_device,
|
|
&keysc_device,
|
|
&sdhi0_device,
|
|
&sdhi1_device,
|
|
};
|
|
|
|
#define EEPROM_ADDR 0x50
|
|
static u8 mac_read(struct i2c_adapter *a, u8 command)
|
|
{
|
|
struct i2c_msg msg[2];
|
|
u8 buf;
|
|
int ret;
|
|
|
|
msg[0].addr = EEPROM_ADDR;
|
|
msg[0].flags = 0;
|
|
msg[0].len = 1;
|
|
msg[0].buf = &command;
|
|
|
|
msg[1].addr = EEPROM_ADDR;
|
|
msg[1].flags = I2C_M_RD;
|
|
msg[1].len = 1;
|
|
msg[1].buf = &buf;
|
|
|
|
ret = i2c_transfer(a, msg, 2);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "error %d\n", ret);
|
|
buf = 0xff;
|
|
}
|
|
|
|
return buf;
|
|
}
|
|
|
|
static void __init sh_eth_init(struct sh_eth_plat_data *pd)
|
|
{
|
|
struct i2c_adapter *a = i2c_get_adapter(1);
|
|
int i;
|
|
|
|
if (!a) {
|
|
pr_err("can not get I2C 1\n");
|
|
return;
|
|
}
|
|
|
|
/* read MAC address frome EEPROM */
|
|
for (i = 0; i < sizeof(pd->mac_addr); i++) {
|
|
pd->mac_addr[i] = mac_read(a, 0x10 + i);
|
|
msleep(10);
|
|
}
|
|
}
|
|
|
|
#define PORT_HIZA 0xA4050158
|
|
#define IODRIVEA 0xA405018A
|
|
static int __init arch_setup(void)
|
|
{
|
|
/* enable STATUS0, STATUS2 and PDSTATUS */
|
|
gpio_request(GPIO_FN_STATUS0, NULL);
|
|
gpio_request(GPIO_FN_STATUS2, NULL);
|
|
gpio_request(GPIO_FN_PDSTATUS, NULL);
|
|
|
|
/* enable SCIFA0 */
|
|
gpio_request(GPIO_FN_SCIF0_TXD, NULL);
|
|
gpio_request(GPIO_FN_SCIF0_RXD, NULL);
|
|
|
|
/* enable debug LED */
|
|
gpio_request(GPIO_PTG0, NULL);
|
|
gpio_request(GPIO_PTG1, NULL);
|
|
gpio_request(GPIO_PTG2, NULL);
|
|
gpio_request(GPIO_PTG3, NULL);
|
|
gpio_direction_output(GPIO_PTG0, 0);
|
|
gpio_direction_output(GPIO_PTG1, 0);
|
|
gpio_direction_output(GPIO_PTG2, 0);
|
|
gpio_direction_output(GPIO_PTG3, 0);
|
|
ctrl_outw((ctrl_inw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
|
|
|
|
/* enable SH-Eth */
|
|
gpio_request(GPIO_PTA1, NULL);
|
|
gpio_direction_output(GPIO_PTA1, 1);
|
|
mdelay(20);
|
|
|
|
gpio_request(GPIO_FN_RMII_RXD0, NULL);
|
|
gpio_request(GPIO_FN_RMII_RXD1, NULL);
|
|
gpio_request(GPIO_FN_RMII_TXD0, NULL);
|
|
gpio_request(GPIO_FN_RMII_TXD1, NULL);
|
|
gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
|
|
gpio_request(GPIO_FN_RMII_TX_EN, NULL);
|
|
gpio_request(GPIO_FN_RMII_RX_ER, NULL);
|
|
gpio_request(GPIO_FN_RMII_CRS_DV, NULL);
|
|
gpio_request(GPIO_FN_MDIO, NULL);
|
|
gpio_request(GPIO_FN_MDC, NULL);
|
|
gpio_request(GPIO_FN_LNKSTA, NULL);
|
|
|
|
/* enable USB */
|
|
ctrl_outw(0x0000, 0xA4D80000);
|
|
ctrl_outw(0x0000, 0xA4D90000);
|
|
gpio_request(GPIO_PTB3, NULL);
|
|
gpio_request(GPIO_PTB4, NULL);
|
|
gpio_request(GPIO_PTB5, NULL);
|
|
gpio_direction_input(GPIO_PTB3);
|
|
gpio_direction_output(GPIO_PTB4, 0);
|
|
gpio_direction_output(GPIO_PTB5, 0);
|
|
ctrl_outw(0x0600, 0xa40501d4);
|
|
ctrl_outw(0x0600, 0xa4050192);
|
|
|
|
if (gpio_get_value(GPIO_PTB3)) {
|
|
printk(KERN_INFO "USB1 function is selected\n");
|
|
usb1_common_device.name = "r8a66597_udc";
|
|
} else {
|
|
printk(KERN_INFO "USB1 host is selected\n");
|
|
usb1_common_device.name = "r8a66597_hcd";
|
|
}
|
|
|
|
/* enable LCDC */
|
|
gpio_request(GPIO_FN_LCDD23, NULL);
|
|
gpio_request(GPIO_FN_LCDD22, NULL);
|
|
gpio_request(GPIO_FN_LCDD21, NULL);
|
|
gpio_request(GPIO_FN_LCDD20, NULL);
|
|
gpio_request(GPIO_FN_LCDD19, NULL);
|
|
gpio_request(GPIO_FN_LCDD18, NULL);
|
|
gpio_request(GPIO_FN_LCDD17, NULL);
|
|
gpio_request(GPIO_FN_LCDD16, NULL);
|
|
gpio_request(GPIO_FN_LCDD15, NULL);
|
|
gpio_request(GPIO_FN_LCDD14, NULL);
|
|
gpio_request(GPIO_FN_LCDD13, NULL);
|
|
gpio_request(GPIO_FN_LCDD12, NULL);
|
|
gpio_request(GPIO_FN_LCDD11, NULL);
|
|
gpio_request(GPIO_FN_LCDD10, NULL);
|
|
gpio_request(GPIO_FN_LCDD9, NULL);
|
|
gpio_request(GPIO_FN_LCDD8, NULL);
|
|
gpio_request(GPIO_FN_LCDD7, NULL);
|
|
gpio_request(GPIO_FN_LCDD6, NULL);
|
|
gpio_request(GPIO_FN_LCDD5, NULL);
|
|
gpio_request(GPIO_FN_LCDD4, NULL);
|
|
gpio_request(GPIO_FN_LCDD3, NULL);
|
|
gpio_request(GPIO_FN_LCDD2, NULL);
|
|
gpio_request(GPIO_FN_LCDD1, NULL);
|
|
gpio_request(GPIO_FN_LCDD0, NULL);
|
|
gpio_request(GPIO_FN_LCDDISP, NULL);
|
|
gpio_request(GPIO_FN_LCDHSYN, NULL);
|
|
gpio_request(GPIO_FN_LCDDCK, NULL);
|
|
gpio_request(GPIO_FN_LCDVSYN, NULL);
|
|
gpio_request(GPIO_FN_LCDDON, NULL);
|
|
gpio_request(GPIO_FN_LCDLCLK, NULL);
|
|
ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
|
|
|
|
gpio_request(GPIO_PTE6, NULL);
|
|
gpio_request(GPIO_PTU1, NULL);
|
|
gpio_request(GPIO_PTR1, NULL);
|
|
gpio_request(GPIO_PTA2, NULL);
|
|
gpio_direction_input(GPIO_PTE6);
|
|
gpio_direction_output(GPIO_PTU1, 0);
|
|
gpio_direction_output(GPIO_PTR1, 0);
|
|
gpio_direction_output(GPIO_PTA2, 0);
|
|
|
|
/* I/O buffer drive ability is low */
|
|
ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0040 , IODRIVEA);
|
|
|
|
if (gpio_get_value(GPIO_PTE6)) {
|
|
/* DVI */
|
|
lcdc_info.clock_source = LCDC_CLK_EXTERNAL;
|
|
lcdc_info.ch[0].clock_divider = 1,
|
|
lcdc_info.ch[0].lcd_cfg.name = "DVI";
|
|
lcdc_info.ch[0].lcd_cfg.xres = 1280;
|
|
lcdc_info.ch[0].lcd_cfg.yres = 720;
|
|
lcdc_info.ch[0].lcd_cfg.left_margin = 220;
|
|
lcdc_info.ch[0].lcd_cfg.right_margin = 110;
|
|
lcdc_info.ch[0].lcd_cfg.hsync_len = 40;
|
|
lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
|
|
lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
|
|
lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
|
|
|
|
gpio_set_value(GPIO_PTA2, 1);
|
|
gpio_set_value(GPIO_PTU1, 1);
|
|
} else {
|
|
/* Panel */
|
|
|
|
lcdc_info.clock_source = LCDC_CLK_PERIPHERAL;
|
|
lcdc_info.ch[0].clock_divider = 2,
|
|
lcdc_info.ch[0].lcd_cfg.name = "Panel";
|
|
lcdc_info.ch[0].lcd_cfg.xres = 800;
|
|
lcdc_info.ch[0].lcd_cfg.yres = 480;
|
|
lcdc_info.ch[0].lcd_cfg.left_margin = 220;
|
|
lcdc_info.ch[0].lcd_cfg.right_margin = 110;
|
|
lcdc_info.ch[0].lcd_cfg.hsync_len = 70;
|
|
lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
|
|
lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
|
|
lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
|
|
|
|
gpio_set_value(GPIO_PTR1, 1);
|
|
|
|
/* FIXME
|
|
*
|
|
* LCDDON control is needed for Panel,
|
|
* but current sh_mobile_lcdc driver doesn't control it.
|
|
* It is temporary correspondence
|
|
*/
|
|
gpio_request(GPIO_PTF4, NULL);
|
|
gpio_direction_output(GPIO_PTF4, 1);
|
|
|
|
/* enable TouchScreen */
|
|
i2c_register_board_info(0, &ts_i2c_clients, 1);
|
|
set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
|
|
}
|
|
|
|
/* enable CEU0 */
|
|
gpio_request(GPIO_FN_VIO0_D15, NULL);
|
|
gpio_request(GPIO_FN_VIO0_D14, NULL);
|
|
gpio_request(GPIO_FN_VIO0_D13, NULL);
|
|
gpio_request(GPIO_FN_VIO0_D12, NULL);
|
|
gpio_request(GPIO_FN_VIO0_D11, NULL);
|
|
gpio_request(GPIO_FN_VIO0_D10, NULL);
|
|
gpio_request(GPIO_FN_VIO0_D9, NULL);
|
|
gpio_request(GPIO_FN_VIO0_D8, NULL);
|
|
gpio_request(GPIO_FN_VIO0_D7, NULL);
|
|
gpio_request(GPIO_FN_VIO0_D6, NULL);
|
|
gpio_request(GPIO_FN_VIO0_D5, NULL);
|
|
gpio_request(GPIO_FN_VIO0_D4, NULL);
|
|
gpio_request(GPIO_FN_VIO0_D3, NULL);
|
|
gpio_request(GPIO_FN_VIO0_D2, NULL);
|
|
gpio_request(GPIO_FN_VIO0_D1, NULL);
|
|
gpio_request(GPIO_FN_VIO0_D0, NULL);
|
|
gpio_request(GPIO_FN_VIO0_VD, NULL);
|
|
gpio_request(GPIO_FN_VIO0_CLK, NULL);
|
|
gpio_request(GPIO_FN_VIO0_FLD, NULL);
|
|
gpio_request(GPIO_FN_VIO0_HD, NULL);
|
|
platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
|
|
|
|
/* enable CEU1 */
|
|
gpio_request(GPIO_FN_VIO1_D7, NULL);
|
|
gpio_request(GPIO_FN_VIO1_D6, NULL);
|
|
gpio_request(GPIO_FN_VIO1_D5, NULL);
|
|
gpio_request(GPIO_FN_VIO1_D4, NULL);
|
|
gpio_request(GPIO_FN_VIO1_D3, NULL);
|
|
gpio_request(GPIO_FN_VIO1_D2, NULL);
|
|
gpio_request(GPIO_FN_VIO1_D1, NULL);
|
|
gpio_request(GPIO_FN_VIO1_D0, NULL);
|
|
gpio_request(GPIO_FN_VIO1_FLD, NULL);
|
|
gpio_request(GPIO_FN_VIO1_HD, NULL);
|
|
gpio_request(GPIO_FN_VIO1_VD, NULL);
|
|
gpio_request(GPIO_FN_VIO1_CLK, NULL);
|
|
platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
|
|
|
|
/* enable KEYSC */
|
|
gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
|
|
gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
|
|
gpio_request(GPIO_FN_KEYOUT3, NULL);
|
|
gpio_request(GPIO_FN_KEYOUT2, NULL);
|
|
gpio_request(GPIO_FN_KEYOUT1, NULL);
|
|
gpio_request(GPIO_FN_KEYOUT0, NULL);
|
|
gpio_request(GPIO_FN_KEYIN0, NULL);
|
|
|
|
/* enable user debug switch */
|
|
gpio_request(GPIO_PTR0, NULL);
|
|
gpio_request(GPIO_PTR4, NULL);
|
|
gpio_request(GPIO_PTR5, NULL);
|
|
gpio_request(GPIO_PTR6, NULL);
|
|
gpio_direction_input(GPIO_PTR0);
|
|
gpio_direction_input(GPIO_PTR4);
|
|
gpio_direction_input(GPIO_PTR5);
|
|
gpio_direction_input(GPIO_PTR6);
|
|
|
|
/* enable SDHI0 */
|
|
gpio_request(GPIO_FN_SDHI0CD, NULL);
|
|
gpio_request(GPIO_FN_SDHI0WP, NULL);
|
|
gpio_request(GPIO_FN_SDHI0CMD, NULL);
|
|
gpio_request(GPIO_FN_SDHI0CLK, NULL);
|
|
gpio_request(GPIO_FN_SDHI0D3, NULL);
|
|
gpio_request(GPIO_FN_SDHI0D2, NULL);
|
|
gpio_request(GPIO_FN_SDHI0D1, NULL);
|
|
gpio_request(GPIO_FN_SDHI0D0, NULL);
|
|
|
|
/* enable SDHI1 */
|
|
gpio_request(GPIO_FN_SDHI1CD, NULL);
|
|
gpio_request(GPIO_FN_SDHI1WP, NULL);
|
|
gpio_request(GPIO_FN_SDHI1CMD, NULL);
|
|
gpio_request(GPIO_FN_SDHI1CLK, NULL);
|
|
gpio_request(GPIO_FN_SDHI1D3, NULL);
|
|
gpio_request(GPIO_FN_SDHI1D2, NULL);
|
|
gpio_request(GPIO_FN_SDHI1D1, NULL);
|
|
gpio_request(GPIO_FN_SDHI1D0, NULL);
|
|
|
|
gpio_request(GPIO_PTB6, NULL);
|
|
gpio_request(GPIO_PTB7, NULL);
|
|
gpio_direction_output(GPIO_PTB6, 1);
|
|
gpio_direction_output(GPIO_PTB7, 1);
|
|
|
|
/* I/O buffer drive ability is high for SDHI1 */
|
|
ctrl_outw((ctrl_inw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
|
|
|
|
/* enable I2C device */
|
|
i2c_register_board_info(1, i2c1_devices,
|
|
ARRAY_SIZE(i2c1_devices));
|
|
|
|
return platform_add_devices(ecovec_devices,
|
|
ARRAY_SIZE(ecovec_devices));
|
|
}
|
|
arch_initcall(arch_setup);
|
|
|
|
static int __init devices_setup(void)
|
|
{
|
|
sh_eth_init(&sh_eth_plat);
|
|
return 0;
|
|
}
|
|
device_initcall(devices_setup);
|
|
|
|
static struct sh_machine_vector mv_ecovec __initmv = {
|
|
.mv_name = "R0P7724 (EcoVec)",
|
|
};
|